JALL PH01 Digital Wall Clock User Manual

JALL PH01 Digital Wall Clock

Installation

1. Align the positioning hole to nail the hanging nail to the wall.
2. Hang the alarm clock on the nail.
3. Installation completed

Start to power on

Power on for the first time
Connect the DC power plug to the back connector of the alarm clock, and the USB plug at the other end is connected to the charging head to plug into the 100V-240V home socket. As shown in the following figure:

This alarm clock must work with a power adapter. We provide a lifetime warranty for every customer. We strongly recommend you to contact us with your order ID to activate the warranty. You can also visit www.jall- us.com to activate a lifetime warranty. If missing any accessories, please contact us for replacements.

Device Overview

Remote Control Overview

Time Setting (by remote control)

Note: we strongly recommend setting with a remote control for the whole setting.

1. Press   to select 12-Hour or 24-Hour mode according to your habits.
2. Press to turn on AUTO DST, it’s for daylight saving time area. If you don’t need it, just ignore this step.
3. Press  to enter the time setting, you will set in sequence for Hour > Minute > Year > Month > Date
4. The “Hour” is flashing, press to select a value. Press OK and next.
5. Then “Minute” is flashing, press to select value. Press and next.
6. Then “Year” is flashing, press to select value. Press and next.
7. Then “Month” is flashing, press  to select value. Press OK and next.
8. Then “Date” is flashing, press to select a value. Press OK to finish the time setting.

Note: You don’t have to set the day of the week. It’s calculated automatically.
When you turn on Auto DST, time will auto-adjust in March and November.
If you don’t need auto DST. blease turn if off.

AlarmSetting (by remote control)

1. Press to activate/inactivate alarm #1. You will see the icon appears, which means alarm #1 is activated, while disappears means alarm #1 is inactivated.
2. Press to enter the alarm #1 setting, and you will set it in sequence for Alarm Hour > Minute > Alarm Mode (MON-SUN, MON-FRI, SAT-SUN).
3. The “Hour” is flashing, press to select a value. Press and next.
4. Then “Minute” is flashing, press to select the value. Press OK and next.
5. Then select your alarm mode. There are 3 modes to choose from.
   • means the alarm works for Monday to Sunday (every day).
   • means the alarm only works for Monday to Friday.
   • means the alarm only works for Saturday to Sunday.
   • Then press OK to finish the alarm setting.
6. You can press to adjust the alarm volume from V01 to V05.

Note: Please follow the same setting to set Alarm #2.

How to stop the alarm?

1. When the alarm goes off, press any buttons on the remote control to stop the alarm. It will go off the next day.
2. Without any operation, the alarm will ring for 20 minutes and stop automatically. It will still go off the next day.

Note: If you want to disable the alarm permanently, press or turn it off so that it won’t go off the next day.
You will see the alarm icon disappear on the screen.

Temperature Unit

• Press to change the temperature from C° to F°.
• Note: The temperature is detected by the sensor inside the clock. You can’t set it manually.

Screen Brightness

1. In the time display state, presto adjust the screen brightness from High -> Low -> High.
2. You can also press the auto-dimmer button to adjust the screen brightness. In this mode, the brightness will auto-change according to the environment light, making it dimmer at night and brighter at daytime. It shows “A ON”, which means it’s turned ON, while “A OF” means it’s turned OFF.

Font Displaying Colors

• Press to change letter colours.

Night Light Mode

1. Press to turn ON/ OFF the night light at the bottom.
2. When the light is on, press to adjust the brightness of the light (range: L01-L10)

Countdown Setting

• In the time display screen, press to set countdown time,
• Press to set your desired time (range from 1~30MIN).
• Press to start counting down. If you want to stop it and return to the time display screen. Just hold for 2s to quit.

How to stop the bell rings?

1. Press any buttons to stop it.
2. The bell will ring for 60 seconds and stop automatically.

Volume Setting

• In the time display screen, press to set the alarm volume range from (V01-V05)

Daylight Saving Time

1. Press to turn ON / OFF AUTO DST, it’s for daylight saving time area.
   It will automatically adjust the displaying time on the 2nd Sunday of March and 1st Sunday of November. When it’s ON, the screen will show “AUTO DST”.

2. If your area doesn’t apply to daylight saving time, please turn DST OFF.

Tips for remote control

• Please aim at theproduct when using the remote control.

Settings without remote control

We recommend users to set by remote control.
For any reason, if missing a remote control, you can set up basic settings by pressing buttons on the device. However, functions like “Night light”, “DST”, “Countdown”, “Brightness setting”, “Display Colors”, and “Volume” can only be set by remote control.

Time Setting (by device buttons)

Note: we strongly recommend setting up with a remote control for the whole setting.

1. Press the (TIMESE) button on the right of the device to enter the time setting. You will set in sequence for 12/24H mode > Hour > Minute > Year > Month > Date
2. The “12H / 24H” is flashing, press to select a value. Press to confirm and next.
3. Then do the same for “Hour”, and “Minute”. “Year”, “Month” and “Date”.

Note: You don’t have to set the day of the week. It’s calculated automatically. Auto DST can only be set by remote control.

Alarm Setting (by device buttons)

• Press to activate/inactivate alarm #1. You will see the icon appears, which means alarm #1 is activated, while disappears means alarm #1 is inactivated.
• Hold the button for 2 seconds to enter the alarm #1 setting, you will set in sequence for Alarm Hour > Minute > Alarm Mode (MON-SUN, MON -FRI, SAT-SUN). Press the (ALARM • button to confirm and next.
• After setting Hour, Minute, you will need to choose alarm mode:
• Monday to Sunday, 1-5 = Monday to Friday, 6-7 = Saturday to Sunday
• Alarm #2 can only be set by remote control.

FAQ

This section summarizes the most common issues you may have. If you’re unable to solve the issue, please feel free to contact [email protected].

• Q1: The day of the week is wrong.
• This section summarizes the most common issues you may have. If you’re unable to solve the issue, please feel free to contact [email protected].
• The day of the week is calculated automatically. Please check if the “Year”, “Month”, and “Date” are set correctly. Many customers may have set a wrong “Year”.
• The temperature is detected by the inside sensor. The inside circuit may produce heat, making it not so accurate as a professional thermometer. It’s normal. We need your understanding, after all this is not a professional device as thermometer.
• Q2: The temperature is inaccurate
• The remote control is powered by a CR2032 battery. If it doesn’t work, it may be run out of battery. Please try to replace the CR2032 battery.
• Q3: The remote control doesn’t work.
• Q4: The remote control is not sensitive.
• The sensor is in the front of the device. When you press the remote control, please point directly to the front of the device.
• Q5: The alarm doesn’t go off at preset time.
  Please check if your alarm mode is set to 1-5 (Monday to Friday). In this mode, it won’t go off on Saturday and Sunday.

Warranty

• Missing any accessories or any questions during usage, please contact us.
• We provide a lifetime warranty to every customer.
• Contact us to activate your lifetime warranty Now!
• Don’t forget to include your order ID when contacting us.
• Email: [email protected].
• Visit: www.jall-us.com.

References

• jall stores

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>