ascaso I.1D, I.2D Models Dose Dispenser Instruction Manual
- June 3, 2024
- ascaso
Table of Contents
ascaso I.1D, I.2D Models Dose Dispenser
Cleaning
In order to guarantee a proper opera-tion of the machine as well as ground coffee good quality, all areas directly in touch with coffee must be cleaned regularly (at least once a week), with the machine disconnected from the mains in all cases.
Hopper
Remove the hopper 3 from its position (FIG.3) and wash it with a piece of
cloth moistened with water and soap to eliminate the inside oily residues
produced by coffee. Rinse and dry it carefully.
Dose dispenser (I.1D / I.2D models)
- Remove the remaining ground coffee from the dose dispenser.
- Remove the dispenser lid and clean all the internal parts by using a brush. (FIG.3)
External cleaning
Use a brush or a piece of cloth mois-tened with water and soap.
Disconnect the appliance before remove the Hopper
Maintenance
Before carrying out any kind of maintenance operation the grinder must be
switched off as well as disconnected from the mains.
Grinding discs wear must be regularly checked to produce homogeneously ground
coffee and obtain a perfect espresso.
Grinding discs must be replaced between 400-600 Kg (875-1,300 lb) of ground
coffee.
EC Declaration of conformity
ASCASO FACTORY declares that the product this declaration refers to complies
with the requirements of the Directive dated 14th June, 1989 on approximation
of legislations of the Member States with regards to Machines (89/392/EEC),
Elec-trical Material (73/23/EEC) and Electromagnetical Compatibility
(89/396/EEC). SAVE THESE INSTRUCTIONS