xiaomi R4A Mi Router 4A Gigabit Edition User Manual
- June 6, 2024
- Xiaomi
Table of Contents
User Manual of Mi Router 4A Gigabit Edition
All images are for illustration purposes only and may differ from the actual
product by model and region.
Step 1: Connect the cables
Power on the router, then connect the Internet (WAN) port to the DSL/Cable/satellite modem
- If your Internet network is connected via an Ethernet cable at the wall, connect the Ethernet cable directly to the Internet (WAN) port on the router
Step 2: Set up the network connection
- Connect to the Wi-Fi using a phone or computer (no password). The Wi-Fi name can be found on the panel at the base of the router
- Wait until the system indicator light turns blue. Search for the Wi-Fi network and connect 2. At this point, you will automatically be directed to the landing page for connecting to the Internet (if you aren’t, open up the browser that comes with your system and enter “router.miwifi.com ” or “192.168.31.1”)
- Mi Router EULA is available at – http://www1.miwifi.com/router/eula/20191230.html 3. Please enter the account name and password provided by your broadband provider, then click Next (there are different ways of connecting to the internet, so this step may be skipped)
- If you have forgotten your broadband account name or password, you can get them by contacting your broadband provider
4. Set a new Wi-Fi and administrator password.
You can choose to use your Wi-Fi password as your administrator password as well - Please wait until the indicator light turns blue and stops flashing, then reconnect to the Wi-Fi
Manage Mi WiFi
The web management website is router.miwifi.com and supports basic Internet functions Scan the QR code, download the Mi WiFi app, and manage your router anytime, anywhere
http://www1.miwifi.com/app_download.html
FAQ
I have finished setting up my network. Why can’t I connect to the
Internet?
Step 1: Use your phone to search for the Wi-Fi network set by your
router. If you can’t find it, make sure that the router is connected to the
power and has finished booting up
Step 2: Connect your phone to your router’s Wi-Fi network, go to
“router.miwifi.com”, and try to fix the problem based on the network diagnostics
results
I’ve forgotten the administrator password for my router. What should I
do?
If you haven’t set a specific password, your administrator password will be the
same as your Wi-Fi password, so try using this to log in. If the problem
persists, it is recommended that you restore your router to the factory
settings, then set up the network again
How do I restore my router to the factory settings?
First make sure that the router has finished booting up, then hold down the
Reset button at the base of the router for more than 5 seconds and let go when
the system status light turns orange. When the router finishes booting up
again, the reset was successful
What do the different indicator lights mean on the router?
There should be two indicator lights on the front panel, which are the network
status light (blue light) and the system status light (three colors: blue,
orange, and purple)
Network status light | Light with one color (blue) |
---|---|
Off | Nothing is plugged into the external Internet port or there is a problem |
with the connection
On| Network connection normal
Flashing| Sending or receiving data
System status light| three colors (blue, orange, and purple)
Off| Switched off or not connected to the power
Orange| System updating (flashing), system booting up (on, not flashing)
blue| Safe mode (flashing), system failure (on, not flashing)
purple| Functioning normally (on, not flashing)
Specifications:
Name: Mi Router 4A Gigabit Edition
Model: R4A
Operating Temperature: 0~40℃
Input: 12V, 1A
Operating Frequency: 2400MHz~2483.5MHz(≤20dBm), 5150MHz~5250MHz(≤23dBm)
Certifications:
Hereby, Xiaomi Communications Co., Ltd declares that the radio equipment
type R4A is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
Caution:
The product can be used within all European Union countries.
To comply with CE RF exposure requirements, the device must be installed and
operated 20cm (8 inches) or more between the product and all person’s body.
The adapter shall be installed near the equipment and shall be easily
accessible.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC radiation exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device is restricted to indoor use only when operating in the
5150-5250MHz frequency range
| UK
---|---
Manufactured by: Xiaomi Communications Co., Ltd
019, 9th Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District, Beijing,
China, 100085