BT969 Earbuds User Manual: Hassle-Free Listening with Sentry

The SENTRY BT969 Wire-Free Bluetooth Earbuds User Manual provides users with comprehensive instructions on how to use the BC BT969 earbuds. These earbuds are designed for hassle-free listening and offer a truly wireless experience. The manual guides users through the process of setting up and using the earbuds, including charging, pairing, and using them for music and phone calls. Troubleshooting tips are also provided to help users address any issues that may arise. The manual also includes important specifications and compliance information, as well as a limited 90-day warranty. Whether you’re a new user or an experienced one, this user manual is an essential resource for getting the most out of your SENTRY BT969 earbuds.

BC BT969

WIRE-FREE
EARBUDS

Using your BP369True Wireless Earphones

Before use: Charge both earbuds by placing them inside the charging case and press the button on the front of the case once to start charging.

STEP 1 Turn off the Bluetooth function from your music device. eg. Mobile phone or music device.
STEP 2 Take out the earbuds from the charging case after they have charged, it will turn on automatically, even it is not charging. If earbuds are not powered on, press and hold the power button on the two earbuds at the same time for about 3 seconds until the blue and red lights start to flash. Then release
STEP 3 Wait about 8-10 seconds for the two earbuds to connect to each other automatically. If the two earbuds are not pairing, quickly double press on the left earbud, and wait about 8 seconds for pairing. One of the earbuds will be flashing red+blue, and another side of the earbuds will be flashing blue.
STEP 4 You can now turn on the Bluetooth function of your mobile phone. Search and select BT969. Wet 5 seconds. Both earbuds will have no lights flashing and a voice will sound “Connected; then it is ready to use with your device.

Using your BT969 True Wireless Earphones

To use your Wireless Earphones After setting them up
Turn off the Bluetooth function on your phone or device and then press the power-on button on both earbuds for 3 seconds at the same time to turn them on.

Wait 8 seconds for them to connect to each other automatically. Auto pair: Alternatively, If both earbuds are inside the charging case. Press the charging/awake button (Fig.2) on the front of the case. A blue light will turn on indicating the earbuds are awake.
Remove the earbuds from the case, wait 3 seconds, and it will be ready to pair with your Bluetooth device.
Then turn on your Bluetooth function on your device and it should automatically pair with the BT969 earbuds.

Turning off the earbuds

Press and hold the left earbud and right earbud at the same time for about 3 seconds and the earbuds will be powered off (Fig.1)

Charging the Earphones

1. Power off the earbuds and then put both earbuds inside the Charging Case.
2. The case will charge the earbuds automatically after you put both earbuds inside the charging case, or press the button on the front of the case to start charging (Fig.2). A blue light will show that it is charging (Fig.3) Before charging the earbuds make sure the charging case is fully charged – see point 5 below.
   Note: It will take approximately 1.5 hours to charge the earbuds. The Charging case will automatically stop charging when the earbuds are fully charged. To stop charging the earbuds at any time, press the charging button again.

Case Charging

Plug the charging cable into the case. Red light flashing indicates charging, charge for minimum 2 hours. ( The charging case must be fully charged in order to charge the earbuds) The charging complete the red flashing indicate will be changed to solid.

Music functions

When you are listening to the music, short press the button on either earbud: one for music playing, one for music pause.

When the earbuds are approaching very low battery power, one of the earbuds will tum off to save power while the other will continue to play.

Phone calls.

Picking up a phone call – short press the button on the left earbud to answer the phone call and short press again to end the call. Double Long press (2sec) to reject the call.

Trouble Shooting

In the event that your True Wireless Is not connecting to your device.

1. Make sure both earbuds are fully charged.
2. The music device is not more than 5 meters away from the phone and free from Interference from other Bluetooth devices.
3. If the earbuds are on, turn them off by pressing the power button for 3 seconds, and follow Steps 1 – 4 again to reconnect the earbuds and the phone.

If only one earphone Is working

1. Make sure both units are properly charged
2. The mobile or music device is no more than 5 meters away from the buds.
3. Reset your earbuds by following steps 1 – 4.

If the volume Is low

1. Turn up the volume on your device
2. Make sure your mobile device is fully charged and within 5 meters range.

If earbuds are not charging or not holding a charge.

1. Make sure the charging case is fully charged. See point 5
2. Place the earbuds inside the charging case and press the button on the front of the case once. A blue light will show indicating that it is charging the earbuds.
3. Always tum off the earbuds before putting them back in the charging case. Press the button on both earbuds for 3 seconds to power off. (Fig.1)

If after some time, the earbuds not pairing correctly.

1. Delete the earbuds from your phone by going to the phone’s Bluetooth settings.
2. Reset the earbuds by long-pressing both buttons on the earbuds for 10 seconds.
3. Follow Steps 1-4 on the first page of this manual to repair your earbuds to your phone device. Also, it is good to check that the earbuds and charging case are fully

Specifications:

Model Number: BT969

• Bluetooth Version:5.0
• Earphone Battery capacity: 40mah+40mah=80mah
• Case Battery capacity: 200mah
• Power Input: DCSV/200MA
• Protocol: HFP/HSP/A2DP/AVRCP/GAVDP/IOPT
• Works with Bluetooth enabled devices version 3 and above Communication system: Bluetooth Specification version 5.0
• Operating temperature:0 °C to 40 °C
• Radio Frequency: 2.402 GHz-2.480 GHz
• RF Output Power -2.025 dBm (Max)

Limited 90-Day Warranty:

Sentry warrants this product to be free from defects in materials and workmanship for 90 days from the date of original purchase. This warranty does not pertain to damage resulting from accidents, abnormal use, misuse, or neglect. Any defective product will be replaced if returned to an authorized Sentry dealer or to Sentry directly at PO Box 885, One Bridge Street, Hillburn, NY 10931. Please enclose a $5 check for return shipping.

FCC ID: 2ACP4-BT969 Model # BT969

Sentry Industries inc declares that radio equipment BT969 is in compliance with Directive 2014/53/EU. The EU declaration of conformity is available at https://sentryindustries.com/european-declaration-of-conformity/

Confirm ity with Directives
This product is CE marked to denote conformity with Directives 73/23/EEC (low voltage) and 89/336/EEC (Electromagnetic Compatibility), as amended.

Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sentry Industries Inc is under license. Other trademarks and trade names are those of their respective owners.

Supplier’s Declaration of Conformity 47 CFR 47 CFR Part 15.21, 15.105(b)
Compliance Information
Sentry Bluetooth Earphone and Headphone
Responsible Party –
Sentry Industries Inc
One ridge street, Hillburn, NY 10931
Tel +1 843 753 2910

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and12) this device must accept any interference received, inducing interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These knits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunication.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for help

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”

SPECIFICATION

73/23/EEC (low voltage) and 89/336/EEC (Electromagnetic Compatibility), as amended
Environmental Protection| Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

FAQS

How do I charge the BT969 earbuds?

Place both earbuds inside the charging case and press the button on the front of the case once to start charging.

How do I turn on the BT969 earbuds?

Take out the earbuds from the charging case after they have charged, and they will turn on automatically. If they don’t turn on, press and hold the power button on both earbuds at the same time for about 3 seconds until the blue and red lights start to flash.

How do I pair my BT969 earbuds with my device?

Turn off the Bluetooth function on your device, wait for the earbuds to connect to each other automatically, then turn on the Bluetooth function of your device and search for and select BT969.

How do I turn off the BT969 earbuds?

Press and hold the power button on both earbuds at the same time for about 3 seconds.

How do I use the BT969 earbuds for music?

Short press the button on either earbud to play or pause music.

How do I answer a phone call with the BT969 earbuds?

Short press the button on the left earbud to answer a phone call and short press again to end the call. Double long press (2sec) to reject the call.

What should I do if only one earphone is working?

Make sure both units are properly charged and reset your earbuds by following steps 1-4.

What should I do if my earbuds are not charging or not holding a charge?

Make sure the charging case is fully charged, place the earbuds inside the charging case, and press the button on the front of the case once to start charging.

How long does it take to charge the BT969 earbuds?

It takes approximately 1.5 hours to charge the earbuds.

What is the limited warranty for the BT969 earbuds?

The limited warranty is 90 days from the date of original purchase and covers defects in materials and workmanship.

What compliance information is provided for the BT969 earbuds?

The BT969 earbuds comply with Directives 73/23/EEC (low voltage) and 89/336/EEC (Electromagnetic Compatibility), as amended, and FCC Part 15.21, 15.105(b).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>