omthing EO006 Airfree 2 True Wireless Headphones User Guide
- June 6, 2024
- omthing
Table of Contents
EO006
Airfree 2 True Wireless Headphones User Guide
Please read the user guide thoroughly before use of this product and retain it properly for future reference.
Package Contents
Bluetooth Connection
-
Enable the Bluetooth function of your device: Open Settings < Bluetooth, then turn it on.
-
Pairing & Connection
• The first time you turn on the headphones, they will enter the pairing mode and the LEDs of the two earbuds will flash in white and blue alternately. After a successful pairing, the lights will slowly flash. If it is not connected to any device within 5 minutes, the headphones will enter a Sleep Mode. If you close the lid and then open it again, the pairing mode will initiate again.
• In the Bluetooth menu of your device, search something AirFree 2, then click “Connect”, and it will connect successfully, then the LEDs on earbuds will turn off. 3. -
Reconnection
• Open the charging case, the white lights of earbuds will be on for 1 second, then enter into reconnection mode. The LED lights will flash in white, then re-connect to your last device.
• If it is not re-connected to any device within 15s, it will enter into a Searching & Pairing mode, the LED lights will slowly flash in white and blue. If there is no device connected to the headphones, it will enter into Sleep mode. -
Clear Bluetooth connection history: open the charging case (earbuds are in the case), long-press the button on the charging case for 8 seconds and it will clear the pairing history in the phone Bluetooth menu.
Power
Power On
When the charging case is opened, the LEDs on earbuds will flash in white and
blue alternately, and then slowly flash after successful pairing.
Power Off
Put earbuds back into the charging case, and then close the lid.
Awaken
Put the earbuds on your ears to wake them up.
Touch Control
Answer Calls / End Calls
Double click the right/left earbud. (In both mono/stereo mode)
Reject Calls
Long press the right/left earbud for 2 seconds. (In both mono/stereo mode)
Music Playback / Pause the Music
- When the music is paused, double click the right/left earbud to play.
- Taking off either earbud during the music playback will pause the music; putting any earbud on again, the music will start playing again.
Volume +
Triple-click right earbud
Volume –
Triple-click left earbud
ANC On / Off
- ANC On: The earbuds are in pass-through mode by default, long press 2 seconds to activate ANC mode (press either the left or right earbud).
- ANC Off: When ANC is on, long press 2 seconds to turn off ANC and switch to pass-through mode (press either the left or right earbud).
- Turn Off Pass-Through Mode: Turn off in the app.
Voice Assistant
- Turn On: Tap 3 times to activate voice assistant (when not in a call).
- Turn Off: Phone controlled.
Battery Prompt
Low Battery Alert
When the battery is low, the white LED will flash twice per second with an interval of 10 seconds; when there are 25-30 minutes of use time left, you will hear a voice prompt every 5 minutes, about 5-6 times.
- The specific time is related to the use of the headphones.
LED Indicator for Case Battery Status
- Battery Life<20%: LED indicator will flash in red for 8 seconds.
- 20%≤Battery Life≤80%: LED indicator will flash in yellow for 8 seconds.
- Battery Life≥80%: LED indicator will flash in green for 8 seconds.
Charging
Use the USB Type-C to Type-C Cable to Charge the Case
The red LED on the charging case indicates the case is charging.
A single full charge needs approximately 43 minutes. The blue LED on the
charging case indicates the case is fully charged.
To Charge the Charging Case with Wireless Charger.
The red LED on the charging case indicates the case is charging.
A single full charge needs approximately 120 minutes. The blue LED on the
charging case indicates the case is fully charged.
To Charge the Earbuds with the Charging Case.
Put the earbuds in the correct slots and close the lid of the charging case.
The blue LED will indicate they are charging.
A full charge will take around 45 minutes. When fully charged, the LED
indicator will turn off.
Specifications
Model： EO006
Earbud Weight (Single): 3.8 g
Case Weight: 39.2 g
Gross Weight: 48.79 g
Earbud Size: 26.6 x 19 x 22.3 mm
Case Size: 60 x 28 x 49.9 mm
Earbud Battery Capacity (Single): 38 mAh
Case Battery Capacity: 410 mAh
Earbud Charging Time: About 45 min
Case Charging Time: About 40 min
Impedance: 32Ω
Bluetooth: Bluetooth® 5.2
Wireless Range: 10 m
Bluetooth Protocol: HFP / A2DP / AVRCP
Battery Life
- Earbuds in full battery status Music Playback: 5.0 hours (50% Volume)
- Earbuds & case both in full battery status Music Playback: 25 hours (50% Volume)
- The specifications are acquired from laboratory-tested data.
CE
EU regulatory conformance：
RF exposure information: The EIRP power of the device at maximal case is below
the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment
has been performed to prove that this unit will not generate the harmful EM
emission above the reference level as specified in EC Council
Recommendation(1999/519/EC).
To prevent possible hearing damage, do not listen to high volume levels for
long periods.
CE DOC
Hereby, Tiinlab Corporation declares that the radio equipment type EO006 is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.omthing.com
Operation temperature: 0~45℃
Operation frequency(Max power)
Bluetooth: 2402-2480 (5dBm)
FCC
FCC regulatory conformance：
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
FCC ID:2A SD TEO 006R (Right ear)
FCC ID :2A SD TEO 006L (Left ear)
Manufacturer: Twinlab Corporation
Address: No. 3333, Liuxian Avenue, Tower A, 35th Floor,
Tanglang City, Nanshan District, Shenzhen, China