omthing EO008 AirFree Lace Wireless Headphones User Guide
- June 5, 2024
- omthing
Table of Contents
omthing AirFree Lace Wireless Headphones
User Guide
Please read the user guide thoroughly before use of this product and retain it properly for future reference.
Package Contents
How to Pair
1. When the headphones are off, press and hold the Multifunction Button for 5
seconds to enter pairing mode. A voice prompt “Power On” will be heard and the
LED indicator will flash blue and red alternately indicating the headphones
are in pairing mode. The headphones will turn off if there is no connection
within 5 minutes. 
2. Enable the Bluetooth function on your device. Search and find “something
AirFree Lace” in the Bluetooth connection list. Tap on the name to connect. A
voice prompt Connected” will be heard once successfully connected. The blue
LED indicator will flash twice every 4 seconds. 
Note: something AirFree Lace will automatically connect to your device after initial pairing.
How to use power
Power On: When the headphones are off, press and hold the Multifunction Button
for 2 seconds to turn on the headphones. A voice prompt “Power On” will be
heard and the
The blue and red LED indicators will be on for 1 second.
Power Off: Press and hold the Multifunction Button for 3 seconds to turn off
the headphones. A voice prompt “Power Off” will be heard and the blue and red
indicators will be on for 1 second.
Volume Adjustment
Increase Volume: Press the Volume + Button. A voice prompt “Di” will be
heard when reaching the highest volume.
Reduce Volume: Press the Volume – Button. A voice prompt “Di” will be
heard when reaching the lowest volume.
Control Music Tracks
Previous Track: Press and hold the Volume – Button for 2 seconds.
Next Track: Press and hold the Volume + Button for 2 seconds.
Control Phone Calls
Answer: Press the Multifunction Button once.
Hang Up: Press the Multifunction Button once.
Decline Incoming Calls: Press and hold the Multifunction Button for 2 seconds.
Play and Pause Music
Play: Press the Multifunction Button once.
Pause: Press the Multifunction Button once.
Clear Pairing History: Press and hold Volume + and Volume – Buttons
simultaneously for 5 seconds. The blue and red indicators will flash three
times.
Charge
Connect your headphones to a power source using the included Type-C charging
cable.
A voice prompt “Battery Low” will be heard and the red LED indicator will
flash once every second when the battery runs low (Playtime less than 10
minutes or voltage lower than 3.3 V).
The headphones will turn off when the voltage is lower than 3.0V.
The red LED indicator will be on when charging (the headphones can’t be turned
on during charge).
The blue LED indicator will be on when fully charged.
Specifications
Model: EO008
Speaker: 10 mm
Sensitivity Response: 20Hz ～ 20 KHz
Impedance: 16Ω
Sensitivity: 102 ± 3dB
Neckband Length: 300 ± 5 mm
Bluetooth: Bluetooth 5.0
Distance Range: 10 m
Battery: Lithium Polymer Battery 3.8 V / 160 mAh
Charging Time: About 2.5 H
Playing / Talking Time: About 12 H
Standby Time: About 300 H®
Note: Above data is from 1MORE lab which may vary according to user
status.
Warning
- Never dismantle or alter this product by yourself to avoid damages and fire hazards.
- Do not store this product in extreme temperatures (below 0 ℃ or above 60 ℃). Working temperature: 0 ℃ – 45 ℃.
- Do not use this product in thunderstorm weather in case of product malfunctions and electric shock.
- Children under 6 years old should be under adult supervision when using this product.
- If discomfort occurs when wearing this product, please consult a doctor about whether you are suitable to use in-ear headphones.
Note
- Please fully charge the headphones before first use.
- Please charge the headphones if they are about to be idle for more than 3 months.
- Please charge the headphones with chargers certified by a third party authority.
These headphones do not support fast charge, do not charge them with a fast charger.
CE
Declaration of Conformity Hereby, Tiinlab Corporation declares that the radio
equipment type something AirFree Lace Wireless Headphones of EO008 is in
compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address:www.omthing.com
RF exposure information: The device has been evaluated to meet general RF
exposure requirements. The device can be used in portable exposure conditions
without restriction.
Radiation Exposure Statement Power is so low that no RF exposure calculation
is needed.
Operation Frequency/Max. EIRP: 2402-2480MHz, Max. EIRP is 4.55dBm.
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard
(such as catching fire, explosion, leakage of corrosive electrolyte, etc);
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment can
result in an explosion or the leakage of flammable liquid or gas, and A
battery subjected to the extremely low air pressure may result in an explosion
or the leakage of flammable liquid or gas.
** The symbol indicates DC voltage.
RECYCLING**
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to the European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the
environment.
The user has the choice to give his product to a competent recycling
organization or to the retailer when he buys new electrical or electronic
equipment.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
FCC
The device has been evaluated to meet general RF exposure requirement, The
device can be used in portable exposure conditions without restriction.
Federal Communication Commission (FCC) Radiation Exposure Statement Power is
so low that no RF exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Radiation Exposure Statement:
The product complies with the Canada portable RF exposure limit set forth for
an uncontrolled environment and is safe for intended operation as described in
this manual. Further RF exposure reduction can be achieved if the product can
be kept as far as possible from the user body or set the device to lower
output power if such a function is available.
Manufacturer: Twinlab Corporation
Address: No. 3333, Liuxian Avenue, Tower A, 35th Floor,
Tanglang City, Nanshan District, Shenzhen, China
FCC ID: 2ASDIEO008 IC: 24662-EO008
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>