omthing EO005 AirFree Pods True Wireless Headphones User Guide

omthing EO005 AirFree Pods True Wireless Headphones

Product Diagram

Operations and Functions

Note：

1. If there is no sound in either of the earbuds, please put both earbuds back into the case and take them out again to pair them with each other.
2. If they still won’t connect, please pair them manually by tapping the Touch Control on both earbuds twice.

Pairing the Earbuds with Your Device

1. When the earbuds are in pairing mode, the LED indicator on one earbud will fiash white and blue slowly, and that on the other earbud will fiash white slowly. .
2. Enable the Bluetooth function on your device.
3. Search and find “omthing AirFree Pods” in the Bluetooth connections. Tap on the name to connect.
4. When successfully connected, the white LED indicator will fiash once every 5 seconds.

Auto Connection

• The earbuds will try to pair with previously connected devices first when turned on.
• The reconnection duration is 15 seconds with the white indicator on one earbud fiashing fast and the light on the other earbud fiashing slowly. They’ll enter pairing mode once the reconnection failed.

Bluetooth Disconnection

When your device’s Bluetooth function is disabled or the distance between your device and the earbuds is beyond the Bluetooth range, the earbuds will disconnect with your device and enter pairing mode with the indicator on one earbud fiashing blue and white slowly and the light on the other earbud fiashing white slowly. If there is no connection in 6 minutes, the earbuds will automatically turn off.

Charge

Charging the Earbuds

Place the earbuds into the charging case, charging will start automatically. It takes around 1.5 hours to get it fully charged.

Charging the Case

• Connect the case to a power source via the charging port or place it onto a Qi wireless charging pad, charging will start automatically.
• The LED indicator on the case will keep fiashing when charged and keeps on once fully charged.

Note: Please charge the earbuds when the voice prompt “Battery Low” is heard.

CVC Noise Cancellation

Automatically be activated during a phone call.

Specification

• Above data is measured in laboratory and may vary  depending on the usage status.

Safety Information

1. Never dismantle or alter this product under any circumstance to avoid fire hazards or damages to this product.
2. Do not expose this product to extreme temperatures (below 0℃ or above 60℃). The product operation ambient temperature is 0℃~45℃.
3. Do not use this product in thunderstorm weather in case of product malfunction or electric hazards.
4. Children under 6 years old should be under adult supervision when using this product.
5. If any ear discomfort occurs while wearing the earbuds, please consult a doctor to check whether you are suitable to use in-ear headphones.

Tips

1. Please fully charge the earbuds before first use.
2. Please charge the earbuds if they are about to be idle for a long time (3 months and above).
3. Please charge the case with a charger made by an authorized third party

CE

Declaration of Conformity Hereby, Tiinlab Acoustic Technology Limited declares that the radio equipment type omthing AirFree Pods True Wireless Headphones of EO005 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.omthing.com

RF exposure information: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.

Declaration for EU Compliance
Operation Frequency/Max. EIRP: 2400-2483.5MHz, Left ear Max. EIRP is 8.53dBm, Right ear Max. EIRP is 8.62dBm

Warning

Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte etc);

Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of fiammable liquid or gas; and A battery subjected to extremely low air pressure that may result in an explosion or the leakage of fiammable liquid or gas.

The symbol indicates DC voltage.

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive 2014/53/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

FCC

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment .
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changesto this equipment. Such modifications or changes could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC

This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been tested for compliance with IC SAR values at a typical operating near the body. To ensure that RF exposure levels below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 0 cm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do not meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them.

Manufacturer: Tiinlab Acoustic Technology Limited.
Address: Tianliao Building 1403, Zone A Tianliao Industrial Park, Taoyuan Str., Nanshan Dist., Shenzhen, P.R. China

References

• omthing.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>