eufy T8010X HomeBase 2 Wireless Base Station User Guide

: June 6, 2024
: Eufy

Table of Contents

eufy T8010X HomeBase 2 Wireless Base Station
WHAT’S INCLUDED
PRODUCT OVERVIEW
POWERING ON HOMEBASE 2
ADDING TO EUFY SECURITY
ADDING OTHER DEVICES
NOTICE
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eufy T8010X HomeBase 2 Wireless Base Station

WHAT’S INCLUDED

eufy T8010X HomeBase 2 Wireless Base Station 1

PRODUCT OVERVIEW

Status LED
Speaker
Power port
USB port
Ethernet port
SYNC/ALARM OFF button
Reset button

POWERING ON HOMEBASE 2

Power on and connect HomeBase 2 to a LAN port on your router.
Wait for a moment (up to 1 min) until the status LED turns blue.

ADDING TO EUFY SECURITY

Download and install the eufy Security app, and sign up for an account.
Add HomeBase 2 to your device list, and follow the in-app instructions to complete the setup.

ADDING OTHER DEVICES

Follow the in-app instructions to add your eufy Security devices to the HomeBase 2.

NOTICE

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
Notice : Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party: Company Name: POWER MOBILE LIFE, LLC Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541 Telephone:1-800-988-7973 This product complies with the radio interference requirements of the European Community.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site www.eufylife.com Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for HomeBase 2 and accessories is -10°C-45°C. The suitable temperature for eufyCam 2 and accessories is -20°C-50°C. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C. Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the device and the guarantee article. This charger is for indoor use only The charger type is ASSA67W-120200, output voltage/current is 12Vdc/2A. The plug considered as disconnect device of adapter. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. SUB-1G Frequency range (for T8010): 866~866.8MHz ; Sub-1G Max Output Power (for T8010):5.492dBm (ERIP)Wi-Fi Operating Frequency Range:2412~2472MHz ; Wi-Fi Max Output Power:17.13dBm (ERIP for T8010),17.47dBm (ERIP for T8114) Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3-5, 80807 Munich, Germany Anker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

DISPOSAL

IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.”