eufy T8350 Baby Monitor 2 User Guide
- June 6, 2024
- Eufy
Table of Contents
eufy T8350 Baby Monitor 2
Anker Innovations Limited. All rights reserved. eufy and the eufy Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
SAFETY INSTRUCTIONS
Strangulation Hazard: Children get STRANGLED in cords. Keep cords out of the
reach of children (more than 1m / 3ft away). Never use extension cords with AC
adapters. Only use the AC adapters provided.
NOTE: eufyCare Baby Smart Sock is not a medical device and is not
intended for diagnosis prevention, or treatment of any disease or condition.
HOW THE PRODUCT WORKS
The product includes a camera allowing you to watch your baby, and provides real-time monitoring of heart rate and blood oxygen level via the smart sock worn on the baby’s foot. In case of emergency, you can get alarms from the display and your phone through the eufyCare app.
GETTING STARTED
Power on the Display：
Charge the sock, and then it can be detected and connected to the display (for eufyCare Baby Monitor 2 Complete only)：
| Item | Status LED | Description |
|---|---|---|
| Display | Solid red | Charging |
| Solid white | Fully charged | |
| Flashing red | Low battery | |
| Camera | Solid white | Connected |
| Flashing white | Waiting to pair | |
| Flashing white fast | No connection | |
| Sock | Flashing red | Charging and waiting to connect |
| Solid red | Charging and connected | |
| Solid green | Fully charged and connected |
SETTING UP YOUR DISPLAY, CAMERA, AND SOCK
After powering on your display, follow the on-screen instructions to complete
the initial setup.
DOWNLOADING EUFYCARE APP
For remote access, download the eufyCare app from Google Play or App Store.
Scan the QR code on the display using your eufyCare app to complete the setup.
MOUNTING THE CAMERA
You have three options to mount the camera: on the wall, in the corner, or on the crib.
WRAPPING YOUR BABY’S FOOT WITH THE SOCK
Choose the right size for your baby. The sock with the pre-installed sensor is
for babies at 4-12 lbs. To install the sensor on the bigger sock (12-30 lbs):
Remove the original sensor from the sock.
The sock can be worn on either foot. Place the sock sensor on the foot as illustrated (do not overtighten the strap).
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
T8340 has been evaluated and following general RF exposure requirement. The
device can be used in portable exposure condition without restriction. The min
separation distance is 0cm.
T8350 has been evaluated and following general RF exposure requirement. The
device can be used in portable exposure condition without restriction. The min
separation distance is 0cm. SAR: 0.757 W/Kg
T8360 has been evaluated to meet general RF exposure requirements. The device
can be used in fixed/mobile exposure condition. The min separation distance is
20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone:1-800-988-7973
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU.For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
This product can be used across EU member states.
The adapter shall be installed near the equipment and shall be easily
accessible. Do not use the Device in the environment at too high or too low
temperature, never expose the Device
under strong sunshine or too wet environment. The suitable temperature for the
product and accessories is 32°F to 95°F / 0°C to 35°C.
When charging, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature
that ranges from 5℃~25℃.
Please ensure to use only the charger offered by the manufacturer. Using
unauthorized charger may cause danger and violate the authorization of the
projector and the guarantee article.
The chargers are for indoor use only. The plug considered as disconnect device
of adapter.
The charger for T8340 type is TEKA-UCA10EU, output voltage/current is 5Vdc/1A.
The charger for T8350 type is TEKA-UCA20EU, output voltage/current is 5Vdc/2A.
The charger for T8360 type is TEKA-UCA20EU, output voltage/current is 5Vdc/2A.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of d=20 cm between the device and the human body. To maintain
compliance with RF exposure
requirement, use product that maintain a 20cm distance between the device and
human body.
- T8340 Bluetooth Operating Frequency Range:2402~2480 MHz; Bluetooth Max Output Power:8 dBm(EIRP) .
- T8350 Wifi Operating Frequency Range:2412~2472 MHz(2.4G); Wifi Max Output Power:19 dBm(ERIP );Bluetooth Operating Frequency Range:2402~2480 MHz; Bluetooth Max Output Power:8 dBm(EIRP) .
- T8360 Wifi Operating Frequency Range:2412~2472 MHz(2.4G); Wifi Max Output Power:19 dBm(ERIP );Bluetooth Operating Frequency Range:2402~2480 MHz; Bluetooth Max Output Power:8 dBm(EIRP) .
- T8350 was tested for typical body-worn operations with the back of the handset kept 0 mm from the body. The SAR limit of Europe is 4.0 W/kg. this product has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the limb is 1.707W/kg .
This device was tested for typical hand held operations with the back of the
device kept 0mm from the Limb.
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich,
Germany
IC RF Statement:
T8340 has been evaluated and following general RF exposure requirement. The
device can be used in portable exposure condition without restriction. The min
separation distance is 0cm.
CUSTOMER SERVICE
-
Warranty
12-month limited warranty -
Call Us|
United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00 -
Email Us
Customer Support: support@eufylife.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>