MOBILOGIX BAT-X Battery Powered Tracker User Guide

June 6, 2024
Mobilogix

MOBILOGIX BAT-X Battery Powered Tracker LOGO

MOBILOGIX BAT-X Battery Powered Tracker

MOBILOGIX BAT-X Battery Powered
Tracker PRO

INTRODUCTION

  • PURPOSE

The purpose of this document is to provide information regarding the function, features, and usage of the BAT-X product.

CONTACT INFORMATION

Email us at support@mobilogix.com Call us on 949-748-8895

RELATED PUBLICATIONS AND DOWNLOADS

  •  Product Brief
  •  Quick Start Guide

PRODUCT DESCRIPTION

  • PRODUCT OVERVIEW

The BAT-X is a battery-operated global tracking device utilizing low-power LTE CAT-M1 technology with embedded Bluetooth gateway capabilities. The BAT-X is smart logic-enabled to maximize battery life and comes with a fully configurable sensor feature set. Pair the BAT-X with Fusion-IoT for a mobile and modular end-to-end solution to smart asset management. On its own, the BAT-X is a fully capable indoor/outdoor tracking solution providing location and environmental data about asset conditions. Combined with the BTM250 series of Bluetooth beacons, BAT-X combines data from these sources with its own location and environmental data for aggregation of actionable data to Fusion- IoT.

  • PRODUCT APPLICATIONS AND BENEFITS
  • INDOOR AND OUTDOOR LOCATION TRACKING

BAT-X provides location data information from multiple onboard sources. Using GNSS, BAT-X provides accurate outdoor location information for asset management. Utilizing Wi-Fi and Bluetooth, BAT-X provides seamless indoor location tracking as assets move into a distribution center, a warehouse, or a multistory structure. Pair BAT-X with Fusion IoT cloud platform for a complete end-to-end supply chain or cold chain tracking solution.

CONFIGURABLE BLUETOOTH BEACON OR GATEWAY MODES
BAT-X can be used with Bluetooth 5 technology to aggregate data and act as a gateway solution for the BTM250 series and other Bluetooth devices. BAT-X can also smartly operate as a beacon in advertise mode to conserve battery power during extended idle periods between operations.

CONFIGURABLE BLUETOOTH BEACON OR GATEWAY MODES
BAT-X can be used with Bluetooth 5 technology to aggregate data and act as a gateway solution for the BTM250 series and other Bluetooth devices. BAT-X can also smartly operate as a beacon in advertise mode to conserve battery power during extended idle periods between operations.

LONG TERM OPERATION
BAT-X is the optimum device for highly dynamic tracking solutions. Leveraging smart-logic, configurable operation modes and increased battery density, BAT-X provides extended tracking and data collection capacity between charges.

INDICATORS AND ACCESSORIES

INDICATORS

MOBILOGIX BAT-X Battery Powered Tracker FIG 1

ACCESSORIES

Charge with any USB Adapter.

PRODUCT FEATURES

3.1     COMMUNICATION

| Parameter| Value|
Cellular Module| Quectel® BG95-M3 (Qualcomm® MDM9205)
Antenna| Internal
Radio| LTE (CatM1, NB1): B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66

GPRS/EGPRS: 850, 900, 1800, 1900

Max Output Power| 23 dBm
GNSS| GPS, GLONASS
Processor| ARM A7
SIM Card| 3FF

  • SENSORS
Parameter Value
IMU 6-axis Accelerometer & Gyro
Start time 10 ms (warm), 55 ms (cold)
Sensitivity ~16.4 LSB/°/s (@ 2000°/s range)
  • TEMPERATURE
Parameter Value
Range -40°C – 85 Celsius (°C)
  • PRESSURE
Parameter Value
Range 300 hPa – 1100 Hectopascals (hPa)
Offset temp. coefficient ±1.5 Pa/K
  • HUMIDITY
Parameter Value
Range 0 – 100 %Relative Humidity (%RH)
Accuracy ± 3%

AMBIENT LIGHT

Parameter Value
Range 0 – 64000 lux
  • DROP AND IMPACT
Parameter Value
Range 1 – 25.5 G
  • TILT
Parameter Value
Range 0 – 180 (non-negative) Degrees

The following figures describe the expected values to be output by the tilt sensor when it is in various positions. There is a minimum value of 0 in any direction, a maximum 180 (no negative values).

Tilt Orientation Table

  • BATTERY
Parameter Value
Capacity 4000 mAh
Operating Voltage >3.8 V
Chemistry Li-ion (rechargeable)
Runtime Up to 1-year battery life on a single charge
Charging Micro USB 2.0 (type B receptacle)

ENCLOSURE

  • Dimensions: 122 x 60 x 23 mm
  •  Increased rigidity and environmental resistance
  •  Ambient light window
  •  Power, Network, and GPS LED status indicators
  •  Humidity vents (optional membrane)

SERVICES

  •  FOTA (firmware over the air) updates
  •  Fusion LaaS (indoor and outdoor location services)
  •  Indoor Location via BLE5 beacons

SECURITY

  •  Qualcomm® Trusted Execution Environment
  •  Crypto Engine
  •  Secure Boot
  •  Silabs Hardware Cryptographic Accelerators
  •  AES 128/256
  •  SHA-1, SHA-2 (SHA-224 and SHA-256), and ECC

PRODUCT SPECIFICATIONS

MECHANICAL

  • Mechanical Drawing
Parameter Value
Length (mm) 123.00 ± 0.10
Width (mm) 58.00 ± 0.10
Height (mm) 23.38
Weight (g) 153

Table 4-1 Mechanical Dimensions Summary

PACKAGING AND HANDLING

  • PRODUCT MARKING AND SERIALIZATION
  • DESCRIPTION
    The BAT-X product has labels identifying the product’s FCC ID, ISED, as well as barcodes identifying the ICC ID, IMEI, and Serial Number.

PART NUMBER

Figure 5-1 BAT-X Label Format

Number Description
1 Mobilogix logo
2 Model name
3 FCC ID
4 IC ID
5 QR Code (example: ICC

ID:12345678901234567890,IMEI:123456789012345,S/N:A500X20010000S)
6| ICCID
7| IMEI
8| S/N
9| Date Code

Table 5-1 BAT-X Label Description

ENVIRONMENTAL SPECIFICATIONS


Parameter

| ****

Value

---|---


Operating Temperature

| ****

-20°C – 60°C


Operating Humidity

| ****

0%RH – 100%RH


Storage Temperature

| ****

-20°C – 60°C


Storage Humidity

| ****

0%RH – 60±25%RH


Extended Storage Temperature

| ****

-20°C – 25°C


Extended Storage Humidity

| ****

0%RH – 60±25%RH

Table 6-1 Environmental Specification

COMPLIANCES

  • DISCLAIMERS
    FCC INTERFERENCE STATEMENT (PART 15.105 (B))
    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC PART 15 CLAUSE 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC PART 15.19(A) [INTERFERENCE COMPLIANCE STATEMENT], UNLESS THE FOLLOWING STATEMENT, IS ALREADY PROVIDED ON THE DEVICE LABEL This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF EXPOSURE GUIDANCE STATEMENT In order to comply with FCC/ISED RF Exposure requirements, this device must be installed to provide at least 20 cm separation from the human body at all times.

IC

ISED RSS-GEN NOTICE
This device complies with Industry Canada’s license-exempt RSS. Operation is subject to the following two conditions:

  1.  This device may not cause interference; and
  2.  This device must accept any interference, including interference that may cause undesired operation of the device.

ISED RF EXPOSURE GUIDANCE STATEMENT
In order to comply with FCC/ISED RF Exposure requirements, this device must be installed to provide at least 20 cm separation from the human body at all times.
Afin de se conformer aux exigences d’exposition RF FCC / ISED, cet appareil doit être installé pour fournir au moins 20 cm de séparation du corps humain en tout temps.

MOBILOGIX BAT-X Battery Powered Tracker FIG 6

SAFETY RECOMMENDATIONS/DISPOSAL

  • Improper handling and use can cause permanent damage to the product. There is also the possible risk of personal injury from mechanical trauma or choking hazard.
  • Do not disassemble the product. Evidence of tampering will invalidate the warranty.
  • Never incinerate nor dispose of the product in fire, which is extremely dangerous as this may cause an explosion of the battery The product should never be soaked with liquids.
  • Battery replacement shall be done only by the device supplier and never by the user.
  • Caution – Risk of explosion if the battery is replaced by an incorrect type.
  • Dispose of used batteries according to the instructions

BATTERY DISPOSAL

“This product must not be treated as household waste. For more detailed information about recycling electronic components contact your local waste management authority.”

WARRANTIES

The warranty for the device and parts is 1 year. Limited Warranty. Mobilogix, Inc. warrants the Unit to be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of shipment of the Unit to the end-user from Mobilogix, Inc. or the authorized reseller, as applicable. No employee, agent, distributor, or other person is authorized to give any warranties on behalf of Mobilogix, Inc. not expressly set forth in this Limited Warranty. For warranty concerns:

• Email us at support@mobilogix.com
• Call us on 949-748-8895

10 GLOSSARY AND ACRONYMS

  • FCC: Federal Communications Commission
    An independent U.S. government agency overseen by Congress, the Commission is the federal agency responsible for implementing and enforcing America’s communications law and regulations.

  • FCC ID: Federal Communications Commission Identifier
    A unique identifier is used for FCC-certified products.

  • GNSS: Global Navigation Satellite System
    GNSS refers to a constellation of satellites providing signals from space that transmit positioning and timing data to GNSS receivers. The receivers then use this data to determine location. By definition, GNSS provides global coverage.

  • ICC ID: Integrated Circuit Card ID
    The ICCID identifies the SIM card. It is a 20-digit globally unique serial number that is printed on the back of a SIM card.

  • ISED: Innovation, Science and Economic Development
    ISED (formerly IC, Industry Canada) regulates the radio spectrum for all transmitters operated in Canada similar to FCC for USA.

  • LTE CAT-M1: LTE Cat-M1 or Long Term Evolution (4G), category M1
    Cat-M1 is a low power wide area radio technology category of LTE. CatM1 provides lower power usage for IoT devices without high bandwidth requirements. CatM1 is not interchangeable with Cat1, the CatM1 device requires specific network operator support.

  • NBIoT: Narrow Band Internet of Things
    NBIoT is a low power wide area radio technology. NBIoT provides more power savings than CatM1 due to offering less bandwidth. Typically NBIoT is used for stationary or semi-fixed device installations but features vary by the network operator.

  • Gateway
    Devices acting as a Gateway will receive data from beacons and post to Fusion via T-Message.

  • Beacon
    Devices acting as a Beacon will advertise their data to a gateway for the post to Fusion via T-Message.

  • BTM250
    BTM250 is a series of Bluetooth Beacon devices. Multiple variants are available supporting various sensor data including temperature, humidity, and pressure.

  • Fusion IoT
    Fusion IoT is a cloud-based application with web and mobile support. Fusion IoT provides visualizations of the data recorded from devices in real-time. BAT-X and BTM250 are supported by Fusion IoT out of the box.

  • Operating Modes
    Operating modes define the behavior of BAT.

  • Normal Mode
    Normal Mode is the standard Operating Mode for BAT. Normal Mode is used for tracking of assets and reporting to data using Cellular connections.

11 DOCUMENT HISTORY

Version Date Note of change
1.0 11/17/2020 Original release
1.1 6/24/2021 ATD500Y release

Documents / Resources

| MOBILOGIX BAT-X Battery Powered Tracker [pdf] User Guide
ATD500Y, 2AH4HATD500Y, BAT-X Battery Powered Tracker, Battery Powered Tracker
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals