MOBILOGIX ATD310B Wireless Headlight Controller User Guide
- June 5, 2024
- Mobilogix
Table of Contents
MOBILOGIX ATD310B Wireless Headlight Controller
INTRODUCTION
ATD310B is a Wireless Headlight Controller (WHC) multi-functional device with Cellular, Bluetooth, and NFC communications interfaces. When powered the device enters sleep mode. There is no on/off switch, the button will wake up the device from Sleep Mode. The device will remain in Sleep Mode while stationary. When moved unexpectedly the device will send current location and sensor information to home server to report the unauthorized movement. When device obtains authorization, it goes into Trip Mode. In this mode the device logs sensor and location information. When the user ends Trip Mode the data is reported to a cloud server and the device returns to Sleep Mode.
CONTACTS
DISCLAIMERS
FCC INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC PART 15 CLAUSE 15.21
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC PART 15.19(A) [INTERFERENCE COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
ISED RSS-GEN NOTICE
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC RF EXPOSURE GUIDANCE STATEMENT
In order to comply with FCC/ISED RF Exposure requirements, this device must be
installed to provide at least 20 cm separation from the human body at all
times.
ISED RF EXPOSURE GUIDANCE STATEMENT
In order to comply with FCC/ISED RF Exposure requirements, this device must be
installed to provide at least 20 cm separation from the human body at all
times.
VERSION HISTORY
- Date /Description
- 2020-11-05 /Document release.
5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620 P: +1 (949) 748-889 E: info@mobilogix.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>