eufy D10 Security Smart Lock User Guide
- June 6, 2024
- Eufy
Table of Contents
QUICK START GUIDE
eufy Security Smart Lock D10
PRODUCT OVERVIEW
For Smart Lock Installation
For Keypad Installation
Required (not included)
COMPATIBLE DOORS
INSTALLING KEYPAD
Option 1: 3M Sticker
|
---|---
|
Option 2: Expansion Bolts
|
---|---
INSTALLING SMART LOCK
|
---|---
If the mounting plate is not installed tightly to the door, use the screw pads provided.
❺ Select an adapter(C) according to the cross-sectional shape and angle of the tailpiece.
❼ Lock and unlock to test.
If the smart lock is not installed tightly to the door, use the provided 3M sticker.
SETTING UP THE SYSTEM
-
Download and install the eufy Security app, then sign up for an account.
-
Follow on-screen instructions to add the smart lock to your device list.
NOTICE
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is 0°C – 49°C (32°F –
120.2°F) for the lock and -10°C – 50°C (-50°F – 122°F) for the keypad.
When supplying, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to supply the device in an environment with a temperature
that ranges from 5°C – 25°C (41°F – 77°F).
This product is designed and manufactured with high-quality materials and
components, which can be recycled and reused.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
The equipment is only suitable for mounting at heights ≤ 2 m.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed / mobile exposure condition. The min separation
distance is 20 mm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations. The following importer is the
responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
CUSTOMER SERVICE
Warranty
12-month limited warranty
+1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
Customer Support: [email protected]
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,Mongkok, Kowloon, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
51005002998 V01