ELBA EK-K5226 Electric Kettle Owner’s Manual
- June 6, 2024
- ELBA
Table of Contents
ELECTRIC KETTLE
Model no : EK-K5226(SS)
Owner’s Manual
Please read the manual carefully), before operating your set
Retain for future reference
Record model number and serial number of the set
See the label attached on the set quote this information to your dealer when
you require service
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate
CAUTION
-
Ensure there is enough water when plugged in. Do not ever try to add or pour water when the kettle switch is on.
-
Do not switch on the kettle when it is empty.
-
Do not leave water inside the kettle for a long time otherwise it may cause damage to the heating element. To ensure long life, the kettle must be always kept clean.
-
Do not immerse the kettle in water
-
The kettle is intended for boiling water only.
-
Do not switch on the kettle without a lid.
-
Do not tilt the kettle as shown in the right picture, otherwise, the water will leak from the steam muffle.
-
Do not try to repair the kettle on your own. Please contact our authorized dealers or after-sales service center for any necessary repairs.
HOW TO CLEAN & CARE
- Unplug before cleaning.
- Use a soft damp cloth to wipe the kettle body.
INSTRUCTIONS FOR USE
-
Do not fill water above the fill line, otherwise, water may overflow while boiling. Make sure that the minimum water level is enough to cover the heating element.
-
Connect the receptacle to the power inlet. After that, connect the plug to the wall outlet. Switch on the power and press the switch button to start boiling the water
-
The witch button will automatically turn off when the water is boiled. Caution: Do not touch the hot stainless steel surface.
IMPORTANT INSTRUCTION
Do not place the kettle near hot surfaces and gas burners.
If the supply cord is damaged, it must be replaced with a special cord. Please
contact our authorized dealers or after-sales service center for further
details.
SPECIFICATION
| Capacity | 5.0 Litres |
|---|---|
| Power supply | 220 – 240V – 50Hz |
| Power consumption | 1680 – 2000W |