Dongguanshi Weizhichuang Technology W312 Wireless Charger User Manual
- June 6, 2024
- Dongguanshi Weizhichuang Technology
Table of Contents
Dongguan shi Weizhichuang Technology W312 Wireless Charger
Connect to Power Adapter
System Specifications
- Model: W312
- lnput:5V/3A 9V/2A
- Output :1 SW/1 0W/7.SW/SW/2.SW(For iWatch)
Mobile phone charging right way:
- Electricity charging board blue light turns off after three-second charging plate into standby.
- The mobile phone with a wireless charging function is placed on the charging board, and the LED indicator lights up. When the blue indicator light is on, it is the normal charging state; when there are foreign objects, high temperature, low temperature, over-voltage, over-current, etc., the indicator light will flash. Take off the device’s light turns off.
Compatibility
10W Fast Charge Mode:
iPhone13n2/12 Pro/12 Pro max/12 mini/Samsung Galaxy S21/S20/S10/S9+/
S9/S8/S8+/S7 edge/S7/S6 edge+ Samsung Note 10/Note 9/Note 8/Note 7 7.SW Fast
Charge Mode:
iPhone SE / 11/ 11 Pro / 11 Pro Max/ XS Max/ XR /XS / XI 818 Plus
SW Standard Charge Mode:
AirPods 2/AirPods Pro/All Qi-enabled phones and devices
2W: Apple watch series 6/SE/5/4/3/2/1
Notes:
Please pay attention to the following issues, otherwise, it may cause abnormal
charging, high charging temperature, intermittent charging, or even not
charging.
- Please put the phone/watch at the center of charge area (as the picture shows).
- We recommend QC2.0/3.0 fast charger adapter (9V/2A), which can charge three devices at the same time while maintaining the fastest speed. The 5V/2A charger can only provide a normal charging speed, which will be slower than that of a fast charger.
- The charging distance is 2-8 mm, please don’t wear a protective case that is over 3mm thick.
- The watch has temperature control. When the temperature reaches 104 “F, it will stop charging automatically. If the temperature is normal, it will continue to charge.
- No metal or magnetic objects around 6cm of the back center of the phone during charging.
- The lower temperature, the faster the charging speed. The charging speed is faster in winter than in summer.
- Please don’t charge in high-temperature and humid environments to avoid damage to the circuit.
- Put it at the place that children can’t reach to avoid unnecessary accidents.
The involved images are sketch maps, the final product as per the material subjects includes: Wireless charger1, 1 m power cable 1, user manuaI1, adapter1
FCC warning
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.-
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notes:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC rules. operation is subject to
the following two conditions:(1 )this device may not cause harmful
interference. an (2)this device must accept any interference received,
including interference that may cause undesired operation.