SILJOY CFL-8432 52-Inch Crystal Ceiling Fan Instructions

CFL-8432 52-Inch Crystal Ceiling Fan
Instructions

Safety Information

1. To reduce the risk or electrical shock the electricity has been turned off at the circuit breaker or fuse box before begin.
2. All wiring must be in accordance with the National Electrical Code NASI/NFPA 70 -1999 and local electrical codes. Electrical installion should be performed by a qualified licensed electrician .
3. The outlet box and support srtructure must be securely mounted and capable of reliably supporting 35ib.(15.9kg).Use only UL listed outlet boxes marked “Acceptable for Fan Support of 35ibs(15.9kg)or less.”
4. The fan must be mounted with a minimum of 7 ft. (2m) clearance from the trailing edge of the blades to the floor.
5. Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction.
6. Do not place objects in the path of the blades.
7. To avoid personal injury or damage to the fan and other items use caution when working around or cleaning the fan.
8. Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL-listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
9. After making electrical connections , spliced conductors should be turned upward and pushed carefully up into tne outlet box.The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
10. All setscrews must be checked and retightened where necessary before installation.

WARNING: TO reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation.Do not insert objects in the path of the blades.
WARNING: Remove the rubber motor stops on the bottom of the fan before installing the blades or testing the motor.
WARNING: To reduce the risk or fire or electric shock,do not use this fan with any solid-state speed control device.
WARNING:To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring.It you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.
AWARNING: Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan.
WARNING: To reduce the risk of fire, electric shock, or personal injury. mount to outlet box marked’ Acceptable for fan support of 35 ibs.(15.9 kg)or less.’ and use the screws provided with the outlet box.

Warranty

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser.The supplier also warrants that all other fan parts,excluding any glass or acrylic blades,to be free feom defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned.To obtain warranty service,you must present a copy of the receipt s proof of purchase.All costs of removing and reinstalling the product are your responsibility.Damage to any part,such as by accident,misuse,improper installation or by affixing any accessories ,is not covered by this warranty.Because of varrying climatic conditions this warranty does not cover any changes in brass finish ,including rusting,pitting,corroding,tarnishing.or peeling.Brass finish of this type give their longest useful life when protected from varying weather conditions.A certain amount of “wobble”is normal and should not be consided a defect.Servicing performed by unauthorized persons shall render the warranty invalid.There is no other sxpress warranty.hereby di sclaims any and all warranties,including but not limited to those of merchantabilityand fitness for a particular purpose to the extent permittedby law.The durationof any impiled warranty which cannot be disclaimed is limited to the time period as specified in the sxpress warranty.Some states do not allow a limitation on how long an implied warranty lasts,so the above limitation may not apply to you.The retailer shall not be liable for incidental,consequental,or special damages arising out of or in connection with product use or perforance except as may otherwise be accorded by law.Some states do not allow the exclusion of incidrntal or consequential damages,so the above exclusion or limitation may not apply to you.This warranty gives specific legal rights,and you may also have other rights which vary from state to state.This warranty supersedes all prior warranties.Shipping costs for any return of products as part of a claim on the warranty must be paid by the customer.

Pre-Installation

SPECIFICATION

Size| Speed| Volts| Amps| Watts| RPM| CFM| Net
Weight| Gross
Weight| Cube
Feet
---|---|---|---|---|---|---|---|---|---
52 in| Low| 120| 0.22| 10| 63| 680| 19.21b (8.7KG)| 22.51b
(10.2KG)| 3.05cu.ft
Medium| 0.37| 28.| 108| 2980
High| 0.57| 69.| 177| 5530

The above data are for reference only, Actually the motor speed of each ceiling fan is a little different. Any products, Subject to actual products as standard.
NOTE: These are approximate measures.They do not include the amps and wattage used by the light kit.
Specifications & measurements shown are subject to± 5% variations.
TOOLS REQUIRED

HARDWARE INCLUDED
components table

NOTE: Hardware not shown to actual size.

PACKAGE CONTENTS
Installation of the hanging bracket (suspension part)

For wooden ceiling, use wood screw to drill on the wooden beam or the “junction box” to fix the hanging bracket (selection is made according to actual requirements of the customers).
STEP 1A-WOODEN CEILING
SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX.

1. Use the Mounting Bracket (A) as a guide, mark the spots where the 4 Self Tapping Screws (B) will be drilled.
2. Remove the Mounting Bracket (A), drill 4 holes for 3MM diameter, install the mounting bracket onto wooden ceiling with the 4 Self Tapping Screws (B) & Washers (C).

IMPORTANT: SCREWS MUST BE TIGHTENED TILL SNUG

Note: According to the ceiling of different materials. use different screws to fix the hanging bracket. Don’t fix the hanging bracket on the wood ceiling less than 12MM to prevent danger caused by loosening of screws.
After the hanging bracket is completed. ensure that it can withstand the tension test of more than 68KG for safety.
For concrete ceiling, use the percussion bit with diameter 8mm to drill holes according to the length of expansion screws. Then use the attached expansion screws to fix the hanging bracket onto the ceiling (selection is made according to actual requirements of the customers).
STEP 2A -CONCRETE CEILING
SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX.

1. Use the Mounting Bracket (A) as a guide, mark the spots where the 4 Expansion Bolts (B) will be drilled.
2. Remove the Mounting Bracket (A), drill 4 holes and insert 4 Expansion Bolts (2) into the concrete ceiling, install the mounting bracket and secure with Flat Washers (C), Spring Washers (D) and Nuts (E).

IMPORTANT: SCREWS & NUTS MUST BE
TIGHTENED TILL SNUG
Install the hanging part of the ceiling fan.

1. Install downrod assembly

2. Thread the suspender through the suspended clock and coupling cover .

3. Then insert the tail of the suspender from the lifting head of the motor.

4. .After the lateral pin is threaded out from the suspended head position, insert R type pin.

5. Tighten the lifting head screws. 5.Hang the fan of the hanging pipe into the hanger.

Assembly Hanging the Fan(continued)

1. Making the electrical connections

WARNING:Each wire not supplied with this fans is designed A! , to accept up to one 12-gauge house wire and two wires from the fan.lf you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring,cnsult an electrician for the proper size wire nuts to use.
WARNING:Remove the rubber motor stops on the bottom of fan before installing the blades or testing the motor.
IMPORTANT: Use the plastic wire connectors(BB) supplied with your fan. Secure the connectors with electrical tape and ensure there are no loose strands or connections.
NOTE:The fan comes with 54in.Lead wires for use with an 6 extended ball/downrod assembly.lf using the 4.5in.ball/downrod assembly(B)provided youcan cut the lead wires to your desired length(no sooner than 12in.).

1. The motor “green” wire to the “Ground wire”wire from outside Outlet Box.
2. The motor “white” wire to the “AC IN ”wire from outside Outlet Box.
3. The motor “black” wire to the “blue “wire to the “AC IN ”wire from outside Outlet Box.
4. Finally,put the connected wires in the hanger.
   < Hand Pull Chain ONLY>

Preparing for mounting