Dongguanshi Weizhichuang Technology WZC-W306 3-in-1 Wireless Charging Station User Manual

: June 6, 2024
: Dongguanshi Weizhichuang Technology

Table of Contents

Product Introduction
Product Appearance
LED Status Indication
Charging schematic diagram
Product Specification
Accessories List
Applicable Devices
Warning
Answer Questions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual

Product Introduction

The wireless charger second is compatible with your phone [supporting wireless charging] iWatch and AirPods [or other TWS earbuds the case of which supports wireless charging] and can charge them simultaneously. Say goodbye to the messy cords and use the stand to make your desk and nightstand neatly and organized. If you are annoyed the LED indicator light, please tap the touch control key to turn the light off.

Product Appearance

LED Status Indication

Color/system status	Standby mode	Charging	Error
Green and blue lights	The green light is always on	The blue light is
breathing	The green light is flashing

Operation Steps

Connect. the charger to a C3V/2A OC33.0 adapter through a type—c ceic< chance cable to switch on the power.
Put your phone on aid charge.
PO. the apple watch on and suck tap to charge (roll the welch bend to mirini7e to charge better).
Put the charging case cf your earphones or the earphone charging area to charge.

Charging schematic diagram

For Apple Users

| For iOS+Andriod Devices
---|---
|
Portable Design|

Vertically or Horizontally

|

Product Specification

Product rnodel: W306
Packege 817e: 155165849irn
Input: 9V/2A
Output cellphcne: 10W compatible (1 OW/LbW/oW)
Output Watch: 2.5W(ror Apple iWar 52/53/84/55/56/Sr/S7)
Output earpione: 2.5W (For Apple AirPocs 2,AirPods Fro,AirPods 3; )
Rece-ving distance: ≤1mm
Conversion: ≥73%
Frercpency: 115-205K-17

Accessories List

Wireless Charger 1
Type-C quick crerge cable 1
User manual 1
QCS.0 accp.er A 1
Mat 1

Applicable Devices

Smart Phone
① Compatible with Apple Phone 13,13 Pro,13 Pro Max,13 mini,12, 12 Ito,121’ro Mex,12 min1,11,111to,11 Pro Max.Xs.Xs 8 plus,Phone SE.
②Compatible with Samsung: Galaxy S: 215G,21+5G,21 Ultra 5G, FE 5G, 205G, 20+5G, 20 Compatible 5G, 10, 10-,10e, 9, 9+, 8, 8+, 7, 7 edge,6, 6 edge, 6 edge+ ,6G9209, 6Active; Galaxy Note: 10,10e,10+,9,8,7,6,5.
③Compatible with LG: G2(V S980,Verizon versic0,G3, G8, G6+, G7, OTThinQ, G7+ThinQ, G8, G8 TninQ,v30,v301,V35,v/10 ThinQ,V50, V50ThinQ,LG Luoid2(vS870),LG Optimus F5(As870),LG Optimus-VJ3,Spectrum 2,Optimus GoPro,Op:irnusVull,Op:minus 2,etc.
④ Compatible with NOTORC_A: Droid Turbo, Drc’c Turbo2, Droid 5, Moto Maxx, Ultra M, Mo.o X Force.
⑤ Compatible with Huawei: P30 iro,P40 Pro,P40 Pro+; Mate:10E, 40 RS,40Dre+,40 Pro,40,30E Pro,30 5G,30 Pm 56,30,31) Pro, 30 RS,70 Pro,20 RS,RS;
⑥Compatible with Xiaomi: 10,10 Pro,9,9Prc, Mix 3. Mix 2s; Including other devices with the wireless ohm-ging receiver built-in; other some devices reed toade a wireless clapping receiver
( Note: All devices must meet the Qi standard)
Smart Watch
For Apple iWatch 32/S3/S4/S5/S6/Sr/87
TWS Bluetooth earphones:
Compatible with Apple AirPods 2, AirPods Pro, Airpcds 3;
Compatible with Samsung Galaxy Buds/buds+/Buds Pro/buds Live;
Compatible with H.mwei Free.IDP, 2/3/4i/Pro; and more TWS; (with wireless charging case)

Warning

Co nol pulls the power cord hard to avoid .he power cord Irom be-Kaki-1p or falling off.
Do not disEsserrible by yourself or throw it ‘nth fire or water 7() avoid short circuit and leakage.
Do not use ‘n severely high temperature, humidity, or corrosive environments to avoid leakage of electricity due to the damage to the circut
When using this prod,c1., keep a distance el more than 50cm in front of the pacemaker.
Orly uses the wireless receive- conforming to Qi-standard to conned with the transmitting terminal.
The working environment. The .emperature of the charger is 30°C-32°C.
Do not place the magnetic card, magnetic recording medium and precision machine:00 close 70 the cargo.
<eep out of reach of children.

Answer Questions

If you’re experiencing interrupted or slow charging, check the following:
(1) The back of/our phone should rot have any pop sockets, or credit cards.
(2) Put the perc in the center of the charging surface(this lets the charging eel in your phone lineup will the one inside the wireless charger).
(3) The wireless charging coil on Sony phones is located slightly below the center. dcl) Phone cases should be no thicker than 4 mm for effective charging.
(4) Check whether the adapter is 003.0 that charter.
If you’re failing to charge your device, please try out the following:
(1) Please restart your cell phone uric: test with oTher usr3
(2) Neese check whether the indicator turns on or not.
(3) The wireless charging coil on Sony phones is located slightly below the center.
(4) Phcre cases should be no thic<er -.han 4 mm for effective charging.
(5) Chock whether the adaptor is QC3.0 fast charger.
If you’re failing to charge your device, please try out the following:
(1) I ‘lease restart your cell phone at the test with the oiler USI3 cable.
(2) Please check whether the indicator turns on or not.
(3) Please check the Adapter’s QC3.0 Quick Charger. no.,iPhone original adopter does not match the wireless charger
(4) Please check your Phcre case 7h-curious(c.e-rim). A metal ring or Magnetic, pad will not be available.
If you’re using the recommended wireless charger with the QC3.0 Adapter and have removed any potential charging obstructions, but are still experiencing issues, try:
(J) Replacing the cable connecting your wireless charger.
(2) Rehooling your phone.
(3) Unplug The adapter and reinsert.
Charging is still slow
The mobile shone itself cr the external receiving soil allows the Wrelosscharging current to be different. or the application running consumes a lot of power when the mobile phone is charging. It is recorrinended tcreduce orclese the apulicar on.
The phone is charging intermittently, or the indicator light flashes
If the charging extent is not enough, please use a charging head (adaptor) with sufficient: the power of 9V/2A cr 18W above.
Charging fever
It is normal for the tie receiving coil or transmitter board to generate heat during wireless charging. If the place is too warm, Make your phone off the plate, and switch the plate off. The plate may switch automatically if it is too hot. when the tie plate has cooled down, fry charging again.
The charger does not work
Do not put metal debris or magnetic cards on the charging area. The product does not work due to overstating. please take off the tore and wait or iT to cool down and try charging again.
After-sales service
It your problem has not been solved by following the above steps, please reach out to us via Amazon’s dressage center or support@weetla.com. In order to solve 1 for you faster, please have the following info-nation at hat: your phone’s model, the typo as wall charger you at using, at the typo of phonons you are using (with a link 1 possible). Optionally, you may include a video to illustrate the problem you are having.