Dongguanshi Weizhichuang Technology WZC-B16 Fast Wireless Charger User Manual
- June 5, 2024
- Dongguanshi Weizhichuang Technology
Table of Contents
Dongguanshi
Weizhichuang Technology
WZC-B16 Fast Wireless Charger
User Manual
Connect to Power Adaptet Specification
- Input: 5V / 2A, 9V / 2A
- Output phone: 5W- 7.5W-10W
- Output watch: 2W
- Output earphone: 5W
- Receiving distance: 2 -10mm
- Conversion: >73%
- Frenquency: 100 -205KH z
- Size: 16015022mm
Mobile phone charging right way
- Electricity charging board blue and green lights after the double flashlight, charging plate into standby.
- The mobile phone with a wireless charging function is arranged on the charging board, and the LED indicator light is displayed.
For the blue long light, at this time for the state of charge, the phone is full of electricity after the LED indicator light Shows green.
Compatibility
10W Fast Charge Mode:
iPhone12:12 Pro/12 Pro max/12 miniiSamsung Galaxy S21/S20/S10/S9+/ 59/58/S8+S7
edge/S7/S6 edge+ Samsung Note 10/Note 91\10te &Note 7
7.5W Fast Charge Mode:
iPhone SE / 11/ 11 Pro 111 Pro Max i XS Max / XR XS X 1818 Plus
5W Standard Charge Mode:
AirPods 2/AirPods Pro All Qi-enabled phones and devices
2W: Apple watch series 6SE/5/4/3/2/1
Notes:
Please pay attention to the following issues, otherwise, it may cause abnormal charging, high charging temperature, intermittent charging, or even not charging.
- Please put the phone/watch at the center of the charge area (as the picture shows).
- We recommend QC2.0/3.0 Quick charger adapter(9V/2A), Because the charger charges three devices at the same time. 5V/2A is a normal charge, the charging speed would be slower.
- The charging distance is 2-10mm, please don’t wear a protective case which is over 3mm thick.
- The watch has temperature control. When the temperature reaches 40 degrees, it will stop charging automatically. If the temperature is normal, it will continue to charge.
- No metal or magnetic objects around 6cm of the back center of the phone during charging .
- The lower temperature, the faster the charging speed. The charging speed is faster in winter than in summer.
- Please don’t charge in high temperature and humid environments to avoid damage of the circuit.
- Put it at a place that children can’t reach to avoid unnecessary accidents.
The involved images are sketch maps, the final product as per the material subjects Includes: a wireless charger, lm power cable, user manual
FCC warning:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
This device complies with part 15 of the FCC rules. operation is subject to
the following two conditions:(1)this device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation