CALYPSO K8501/K8502 Sports Smart Watch User Manual

CALYPSO K8501/K8502 Sports Smart Watch

Product includes:

Description of bracelet function

Description of touch key

• Press and hold for 3 seconds to boot.
• Click select function downwards. Press and hold: confirm.

Charging instructions:

• Please pay attention to the charging direction.
• Please be aware that the two contacts of charging cannot contact the conductor at the same time, or it may cause the burning of circuit.

Watch strap disassembly and assembly instructions:

Standby dial plate interface:

Dial plate interface Hold on the dial to enter into the dial preview interface, press and hold on the touch key to select and confirm the dial.

Temperature   Enter into the temperature interface, hold on to activate the temperature detection. (After wearing the bracelet for the first time hold your wrist for 5 minutes, the skin temperature and body temperature can be detected.)

Push message Open the push message interface, bind the bracelet to the app. When notification per-mission is enabled, the new message received in the notification bar of the mobile phone will be pushed to the bracelet. A total of 8 messages can be saved, and the message received after 8 will overwrite previously received messages.

Health

1. Heart rate, correctly wears the bracelet (left hand/right hand) on the wrist, enter the heart rate menu, the heart rate detection will be automatically activated in 2 seconds. The heart rate data will be synchronized to the APP when the bracelet is bound to the APP.
2. Blood pressure, correctly wears the bracelet (left hand/right hand) on the wrist, enter the blood pressure menu, the measurement will be automatically activated in 2 seconds. The blood pressure data will be synchronized to the APP when the bracelet is bound to the APP.
3. Sleep, sleep monitoring period: 21:00 to 9:00 the next day, the bracelet generates data during the sleep monitoring period. After exiting sleep monitoring mode, the bracelet sleep data can be synchronized to the APP when the bracelet is bound to APP.
4. Step count, the step count is enabled by default. This interface displays the current number of steps, kilometers, calories, and heart rate. The data are cleared every day at 12 am.

Sports mode (walking, running, cycling, hiking, indoor walking, indoor running) Select sports mode, the corresponding mode automatically activates in 3 seconds; hold on the touch key to end the sports mode. Sports data can be saved in the bracelet is the distance is larger than 200 meters or sport duration is longer than 5 minutes; Otherwise sports data will not be saved. Bind the smartwatch to APP, press on the sporting history recording interface to synchronize the sports data from smartwatch to APP. The tracking map and detailed data will be shown on the APP.

Other functions

1. Alarm Bind to APP, setting alarm reminder in the smartwatch through APP alarm setting inter-face ( 5 alarm at most).
2. Find phone   Bind to APP, click to find phone, and the phone will ring or vibrate.(Don’t turn off the VI-BRATE or RING on the phone, otherwise, the phone keeps silent.)
3. Stopwatch   Click to enter the stopwatch, press to start or pause it, hold on to end it.
4. Sedentary   You can turn on or turn off sedentary as your wish.
5. Camera Bind the APP, enter the APP, and turn to the Camera on the smartwatch. The camera on the phone will be turned on when holding on the touch key on the smartwatch. Press the touch key can control the camera on the phone, photo auto saved in the album, hold on the touch key to exit.
6. Music After connecting with APP and turning on the music player on the phone, the smartwatch is able to control the music player by pressing and holding on the music control panel to play, pause, previous, and next song.
7. About   Checking the Bluetooth name, MAC, and software version.
8. Reset   Click reset to restore factory setting.
9. Restart Hold on to the restart and hold on for seconds to restart the smartwatch.
10. Power off   Hold on the Power off and hold on for a second to turn off the smartwatch.

Bind Calypso maritime

how to download APP Scan the following QR Code to download the APP.

Bind Bluetooth

Unconnected status: After the bracelet is turned on, the Bluetooth stays in the search state. After opening the APK/APP, enter the device-binding device and select the corresponding bracelet device name to bind the bracelet to the APP.

App binding status: Bracelet time synchronization: After the bracelet is bound to the APP, click to realize synchronization of the time and time system of the bracelet and the mobile phone.

find device: Bind to APP, click find device on the APP, smartwatch screen hold lighting and vibrate for 5 times.

Data synchronization: After the bracelet is bound to the APP, the health data of the bracelet can be synchronized to the APP; Enter the heart rate, sleep, and motion interface, click to select the date to check the data corresponding. Click the upper right icon on the APP to share the data to QQ, QQ zone, WeChat, WeChat moments, Facebook, Twitter, etc.

Message push: After the bracelet is bound to the app, the corresponding notification permission in the mobile phone system is enabled. Enter APP notification settings in the APP to enable more third-party applications.

Call notification: Enable the call notification in the APP. When the mobile phone receives one or more incoming calls, the bracelet will receive one/multiple incoming call notifications at the same time;

SMS notification: Enable the SMS notification in the APP. When the mobile phone receives one/multiple SMS messages, the bracelet will receive one/multiple SMS notifications at the same time;

Other application message notifications: Enable the corresponding application message notification, such as WeChat, QQ, Facebook, Twitter, etc. in the APP. When the mobile phone receives one/multiple application message notifications, the bracelet will receive one/multiple corresponding message notifications at the same time.

Do not disturb mode: After turn, on do not disturb mode, smartwatch vibrate only find device and alarm stays work-ing(message push disable);

Drinking water reminds: Setting start time and end time, frequency(minutes), click repeat settings to select the date(week), then click Drinking water remind button to activate. Bracelet vibrates and the drinking water icon displays on the screen when the drinking time is on.

Sedentary reminder: Set the start time, end time and sedentary time interval (minutes), threshold (steps), click to en-ter the Repeat to select the sedentary reminder date (week). When the sedentary time is up, the bracelet vibrates, showing the sedentary icon.

Alarm reminder: Click the alarm reminder setting to add the alarm time on the bracelet. When the alarm time is up, the bracelet will pop up the alarm icon and vibrate 5 times.

reminding mode

• Bright screen : except for alarms clock, sedentary and drinking water reminders, the watch only displays the bright screen as a reminder;
• Vibration: except for alarms clock, sedentary and drinking water reminders, the watch only vibrates to remind;
• Bright screen + vibration: Any reminders, the watch will display bright screen + vibration reminder;

Heart rate detection: Set the start time, end time and time interval (minutes), check the heart rate test and save.

Firmware upgrade: Detect whether the firmware version of the bracelet is the latest version. It will prompt if there is a new version and update to the latest version.

Unbind: Bind the bracelet to APP; click unbinding with the bracelet on the device interface to unbind the device. Please forget the paired device in the phone settings of the iPhone.

FAQ

• Do not expose this device to overcooling or overheated conditions for a long time, otherwise, it will cause permanent damage.
• Why can’t wear the watch when taking a hot bath? As bath water temperature is high, it will generate mass steam which is in the gaseous phase and characterized by a small-molecule radius. It is easy to penetrate through watch housing gap. When the temperature lowers, it will become a liquid phase water drop, which is easy to cause a short circuit in the watch, resulting in the damaged circuit board and watch.
• The watch can’t start up or charge If the newly received watch can’t startup, it may be the reason that the battery is un-der protected due to collision during watch transportation. Plugin the charging cable to activate the watch. If your watch can’t start up due to too low a battery or the watch has not been used for a long time, please plug in the USB cable and charge for half an hour for activation.

WARRANTY

1. The motherboard is guaranteed for two years from the date of purchase. The battery and charger are covered for six months. The strap is not covered by this warranty. The guarantee covers any problem experienced when the product is used normally if there is a product quality issue caused by manufacturing, material or design defect.
2. The warranty does not cover failures cau- sed by personal reasons of the user, for example:
3. Damage caused by unauthorized disassembly and assembly, modification of watches, etc.
4. A malfunction caused by accidental dropping during use. Any man-made damage through misuse of a foreign element (such as: hot water, ex- eternal force shattering, damage to peripheral components, etc.) is not covered by the warranty.
5. When requesting a warranty repair, a fully filled-out warranty card must be provided with the date of purchase and the stamp of the place of purchase.
6. In case of doubt please contact the point of sale or a qualified after sales service should a repair be needed.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>