DENON AH-C830NCW True Wireless In-Ear Headphones with Active Noise Cancelling User Guide
- June 6, 2024
- Denon
Table of Contents
AH-C830NCW
True Wireless In-Ear Headphones
with Active Noise Cancelling
QUICK
START
GUIDE
Charging
Charge the earphones using the included charging case and USB cable before use.
- Remove the power supply prevention film from the earphones.
- Put the earphones in the charging case (included) and close the lid.
- Connect the charging case to the AC adapter (commercially available) with the USB cable (included).
The LED on the charging case will light up according to the remaining charge
of the earphones.
It will take approx. 2 hours from empty to full charge. The earphones can be
used for approximately 4.8 hours (with noise canceling on) when the battery is
fully charged. When the rechargeable battery is low, a notification sounds.
Pairing with Bluetooth device
Pair the earphones with the Bluetooth device you want to connect.
-
Open the lid of the charging case.
The earphones will automatically turn on, and the pairing mode will be activated with a notification sound from the earphones. -
Activate the Bluetooth function of the Bluetooth device to be connected.
-
Select the “DENON AH-C830NCW” that appears on the Bluetooth device to be connected.
A notification sound will be heard from the earphones when it is connected.
- To pair with other Bluetooth devices or pair with the user device again, put the earphones in the charging case, and press and hold the button on the rear of the charging case for 2 seconds or more with the lid open. The LED on the charging case of this unit blinks slowly in white and enters pairing mode.
- If you are requested to enter a PIN code (passkey), enter “0000” (four zeros).
Playback music
Tap the touch sensor of the right earphone to play/pause, forward and backward.
- Use the Bluetooth device to control the volume.
Setting the ambient sound control function (noise canceling/ ambient
sound mix)
The earphones are equipped with a noise-canceling function to reduce ambient
noise and an ambient sound mix function to capture ambient sound and mix it
with the
music playing. Each time you tap the touch sensor of the left earphone, the
setting changes as follows.
Conducting phone calls
When an incoming call is received, tap the touch sensor of the right earphone
twice to answer an incoming call. During a call, tap the touch sensor of the
right earphone
twice to end the call.
- The above operation can be also performed with the touch sensor on the left earphone.
Web Manual
Refer to the web manual for other functions information and operation
procedure details.
Enter the following URL into your web browser:
manuals.denon.com/AHC830NCW/ALL/EN/
72-C830NC-QSGB4
72-C830NC-QSGB4
Printed in China 5411 11946 00AD
©2021 Sound United. All Rights Reserved.
AHC-830NCW
Documents / Resources
|
DENON AH-C830NCW True Wireless In-Ear Headphones with Active Noise
Cancelling
[pdf] User Guide
AH-C830NCW, AHC830NCW, BV2-AH-C830NCW, BV2AHC830NCW, AH-C830NCW True Wireless
In-Ear Headphones with Active Noise Cancelling, AH-C830NCW, True Wireless In-
Ear Headphones with Active Noise Cancelling
---|---