AIPIN AP-044RF 4 Key RF Aluminum Shell User Manual
- June 16, 2024
- AIPIN
Table of Contents
**AIPIN AP-044RF 4 Key RF Aluminum Shell User Manual
**
Overview
4-key RF aluminum shell controller is a universal RGB controller, which adopts the Advanced PWM (pulse width modulation) control technology at present; It can control all four-wire three-loop (common anode) LED colorful lighting products, brightness and color change frequency adjustment and 22 change modes, just like the magician round, it is at will, colorful and changes at one touch. Renderingtheatmosphere of the party, creating a unique, warm and romantic color atmosphere. It is mainly applicable to the lighting control of constant voltage series products such as RGB LED light bar, Light Bandandmodule.
Product Application
Suitable for indoor and outdoor places such as home color and atmosphere embellishment, KTV private rooms, hotels, stages, casinos, cafes, shopping malls, birthday parties, home cinemas, holiday days, etc
Product Parameters
Controller
Operating voltage| DC 12V~24V
Output Current| 6A*3CH
Output mode| Three CMOS pole outputs
Static power consumption| <1W
Remote control
Operating voltage| DC12
Output Current| <30mA
Operating frequency| 433MHz
Modulation method| ASK for amplitude modulation
Transmit power| <50mW
Oscillation resistance| 4.7M
Working mode| 433 RF
Product Description
Product link diagram
Schema table
| No. | Mode | Remarks |
|---|---|---|
| 1 | Static red | Adjustable brightness |
| 2 | Static Gree | |
| 3 | Static Blue | |
| 4 | Static yellow | |
| 5 | Static purple | |
| 6 | Static cyan | |
| 7 | Static White | |
| 8 | Three-color jump | Adjustable speed and brightness |
| 9 | Seven-color jump | |
| 10 | Three-color gradient | |
| 11 | Seven-color gradient | |
| 12 | Dynamic Red | |
| 13 | Dynamic Green | |
| 14 | Dynamic Blue | |
| 15 | Dynamic yellow | |
| 16 | Dynamic purple | |
| 17 | Dynamic cyan | |
| 18 | Dynamic White | |
| 19 | Red and blue gradient | |
| 20 | Red and green gradient | |
| 21 | Green and blue gradient | |
| 22 | Colorful gradient |
Size
Product size
**Packing size
**
| White box size | Weight/set | Carton size | Weight box (50/set) |
|---|---|---|---|
| L135W83H55mm | 0.17kg | L420×W290×H300mm | 9.5kg |
Product Accessories
-
Remote
-
controller
-
instruction
Installation Precautions
- Please debug and install this product by personnel with professional qualifications.
- This product cannot be waterproof and needs to avoid sun and rain. If installed outdoors, please use a waterproof tank.
- Good heat dissipation conditions will prolong the service life of LED controller. Please install the product in a well-ventilated environment.
- Please do not install and use such products in lightning, thunder, strong magnetic field or high voltage.
- Please check whether the output voltage of the LED power supply used meets the requirements of the product voltage range.
- The diameter of the used wire must be sufficient to load the LED lamps connected, and ensure that the wiring is firm to avoid accidents caused by overheating of the wire or poor contact.
- Before power-on and debugging, ensure that all wiring is correct to avoid lamp damage caused by wiring errors.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
macaques harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does harmfuinterference to radio or television reception, which
can be determined by turning the equipmentoff and on, the user is encouraged
to try to correct the interference by one or more of the following measures
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. -
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled
environment. This equipment should be installed and operated with minimum
distance 0cm
between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>