eufy T8410X Indoor Cam 2K Pan and Tilt User Guide

eufy T8410X Indoor Cam 2K Pan and Tilt User Guide

WHAT’S INCLUDED

Indoor Cam 2K Pan & Tilt
Model: T84 I 0
Mounting Plate
USB Cable
USBAdapter
Mounting Screw Pack
User Manual

PRODUCT OVERVIEW

Indoor Cam 2K Pan & Tilt

1. Lens
2. Microphone
3. SD card slot
4. Status LED
5. Speaker
6. Power input
7. SYNC button

SETTING UP THE SYSTEM

1. Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).

2. Sign up a eufy Security account. Go to the app homepage. Tap Add Device, and add the lndoorCam Pan 2K to your system.

3. Follow the on-screen instructions to complete the setup.

LED Status

MOUNTING THE INDOOR CAM

Select a Location for Mounting

The camera can be placed on a table. shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily.

• Disconnect the Indoor Cam from the power I.Ill oudet before mounting.
• Keep the Indoor Cam at least 0.7 ft/ 20 cm away from walls or anything that may obstruct the view.
• Do this to avoid infrared reflection which can have a negative impact on the night vision performance

Mount the Indoor Camera

To mount the Indoor Cam on the ceiling, follow the steps below

1. Place the positioning card against the ceiling and then mark the points at which drilling will be required.

2. Drill holes with a 5/16″ (8 mm) drill bit.

3. Align the holes on the mounting plate with those in the ceiling. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick. or stucco. Fix the screws with a Phillipshead screwdriver to fasten the mounting plate to the ceiling.

4. Align the grooves with the mounting plate and rotate the Indoor Cam clockwise until it clicks into place.

To mount the Indoor Cam on a wall, we recommend using the mounting bracket (not provided) as the illustration below.

POWERING ON THE INDOOR CAM

Connect the Indoor Cam to a power outlet using the provided USB cable and USB adapter.After being powered on, the Indoor
Cam will be connected to the system. When it is successfully connected, the status LED will turn solid blue. Rotate the Indoor Cam to adjust the view and check it using the live stream which you can access in the eufy Security app.You are now all set to use your Indoor Cam.

Tip:

For troubleshooting, check Help on the eufy Security app.

NOTICE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ( I ) Reorient or relocate the receiving

antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/1V technician for help.
FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition.The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address: 400 I 08th Ave NE Ste 400, Bellevue, WA 98004-5541 Telephone: 1-800-988-7973

This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby.Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.For the declaration of conformity, visit the Web site:https://www.eufylife.com/.

IC Statement

T his device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(I) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.”

 IC RF Statement:

When using the product. maintain a distance of 20 cm from the body to ensure compliance with RF exposure requirements.

CUSTOMER SERVICE

Warranty

12-month Limited Warranty Call Us
United States + I (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-1 I AM (GMT) Germany +49 (0) 69 9579 7960 Mon-Fri 6 :00 -11 :00
Email Us
Customer Support: support@eufylife.com

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>