eufy C24 2K Indoor Camera User Guide

eufy C24 2K Indoor Camera

WHAT’S INCLUDED

1. Indoor Cam 2K x I
2. Model:T8400
3. Mounting Plate x I
4. USB Cable x I
5. USB Adapter x I
6. Mounting Screw Pack x I
7. Quick Start Guide x I

PRODUCT OVERVIEW

Indoor Cam 2K

1. Microphone
2. Lens
3. Status LED
4. SD card slot
5. Speaker
6. SYNC button
7.  Power input

SETTING UP THE SYSTEM

1. Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices). GETrTON r Google Play
2.  Sign up a eufy Security account. Go to the app homepage. Tap Add Device, and add the Indoor Cam to your system.
3. Follow the on-screen instructions to complete the setup.

LED Status

or recording event
Solid bluish violet| System is initializing
Flashing blue and red alternately| Firmware upgrade in progress**

MOUNTING THE INDOOR CAM

Select a Location for Mounting

The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily.

Mount the Indoor Cam

The Indoor Cam can be mounted on the wall or ceiling. To mount the Indoor Cam on the wall:

1. Align the positioning card and then mark the points at which drilling will be required.
2.  Drill holes with a 15/64″ (6 mm) drill bit.
3. Align the holes on the mounting plate with those on the wall, matching the direction as UP and Down indicates. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Fix the screws with aPhillips-head screwdriver to fasten the mounting plate onto the wall.
4. .Align the Indoor Cam’s mounting slot with the mounting plate, and then push the camera down until it clicks into place. To mount the Indoor Cam on the ceiling, follow the steps 1-4 to secure the camera base onto the mounting plate.

POWERING ON THE INDOOR CAM

Connect the Indoor Cam to the power outlet using the provided USB cable and USB adapter.After powered on, the Indoor Cam will be connected to the system. When it is successfully connected, the status LED will tum solid blue. Rotate the Indoor Cam to adjust the view by checking the live streams in the eufy Security app. You are all set to use the Indoor Cam.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning ; Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wilt not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to con-ect the interference by one or more of the following measures: (I) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements.The device can be used in fixed/mobile exposure condition.The min separation distance is 20cm. Notice: Shielded cables AU connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Declaration of Conformity

Hereby.Anker Innovations Limited declares that this device is in compliance with the  essential requirements and other relevant provisions of Directive 2014/S3 /EU.For the declaration of conformity, visit the Web site: https://www.eufylife.com/. This product can be used across EU member states. The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, neverexpose the Device under strong sunshine or too wet environment. The suitable temperature for TS-400 and accessories is 0°c…0°c. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from s0c-2s0c. Please ensure to use only the charger offered by the manufacturer. Using an unauthorized charger may cause danger and violate the authorization of the device and the guaranteearticle This charger is for indoor use only. The charger type Is TEKA-UCA10EU, output voltage/current is SVdd I A. The plug considered as a disconnect device of adapter. RF exposure information:The Maximum Pemiissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement. use product that maintains a 20cm distance between the device and the human body. Wi-Fi Operating Frequency Range:2412-24nMHz ;Wi-Fi Max Output Power: 18.76 (EIRP) Bluetooth Operating Frequency Range: 2402-2480MHz; Bluetooth Max Output Power: 1.86 dBm (EIRP) The following importer is the responsible party (contact for EU matters only) importer: Anker Technology (UK) Ltd Importer Address: Suite B, Fairgate House, 205 Kings Road,Tyseley, Birmingham, BI I 2AA, United Kingdom This product is designed and manufactured with high quality materials and ‘6d components. which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this – product, contact your local municipality, disposal service, or the shop where you bought this product.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1.  this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device:

IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.

References

• eufy | Built with Care | eufy US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>