JLAB BT-817 True Wireless Earbuds User Guide
- June 6, 2024
- JLab
Table of Contents
JLAB BT-817 True Wireless Earbuds User Guide
FIRST TIME SETUP
-
AUTO-CONNECTING EARBUDS
A. Take earbuds out of the charging case and remove stickers.
B. Press and hold 3. seconds on each earbud. Blinking blue and white light on one earbud will indicate ready to pair to your device.
-
CONNECTING BLUETOOTH
Select -JLab Epic Air ANC” in your device settings. Voice prompt -Bluetooth connected” followed by solid white lights will indicate you we connected.
ADDING NEW/ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluotooth from any previously connected device. Turn ON Bluetooth from new device. Take earbuds out of the case. Earbuds will automatically enter Bluotooth Pairing. Select -Jab Epic Air ANC” in now device settings to connect.
CONTROLS
VOLUME DOWN:
Single Tap
SIRI (I0S) OR “OK GOOGLE” (ANDROID):
Double Tap
BE AWARE / ANC ON / ANC OFF: Press and hold 1+ second
EQ CHANGE:
Triple Tap
VOLUME UP:
Single Tap
PLAY / PAUSE:
Double Tap
TRACK FORWARD:
Press and hold 1+ second
EQ CHANGE:
Triple Tap
ANSWER: Single Tap Left or Right
HANG UP: Double Tap Left or Right
REJECT INCOMING CALL:
Double Tap and hold 1+ seconds Left or Right
MUSIC / MOVIE MODE: Press and hold both touch sensors simultaneously 3+ seconds
POWER OFF WITHOUT CHARGING CASE: Turn off your Bluetooth from your device settings. The earbuds will then power off after 3 minutes.
DOWNLOAD THE APP
Customize Epic Air ANC features and update the latest software. Download the JLab Air ANC APP in Apple/Google Play Store
AUTO-POWER ON/OFF
-
Placing the earbuds in the charging case will power OFF earbuds and start charging. Blue lights indicate earbuds are charging and will turn OFF when fully charged.
-
When taken out of the charging case, they will auto power ON and connect.
WIRED CHARGING
Connect the Epic Air ANC to computer or USEI 5v 1A (or less) output device.
LEDs pulse white when charging and turn solid white when fully charged.
WIRELESS CHARGING
Place the charging case on a wireless charging platform.
LEDs pulse white when charging and stay solid white when fully charged.
QUICK TIPS
- The left or right earbud can be used independently for music and phone calls. Simply choose one and take out from the case to connect.
- Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on chosen device to connect.
- Fully dry off earbuds before putting in the charging case to avoid any damage to the case.
For full User Manual and troubleshooting, please visit JLABAUDIO.COM
FITTING
Try all ear tips for best fit and proper seal.
Place in ear canal and slightly rotate to adjust for best fit.
VOICE PROMPTS
“Hello”: Power ON
“Ready to Pair”: Epic Air ANC is ready to pair to your Bluetooth device
“Be Aware”: Hear your surroundings
“ANC ON”: Noise canceling ON
“ANC OFF”: Noise canceling OFF
“Bluetooth Connected”: Earbud is connected to device
“Battery Full: 100-80%
“Battery Medium”: 80-20%
“Low Battery”: Less than 20% (when power decreases to 10%. “Low Battery’ will
play one time)
“Goodbye”: Power OFF
EQUALIZER MODES
“JLab SIGNATURE”
JLab C3 signature sound with amplified vocals and bass
“BEEP”
Custom EO setting (download the JLab Air ANC App to customize).
“BALANCED”
Even sound with no additional sound enhancements
“BASS BOOST”
Amplified bass and sub-bass
Customize each EC) setting by downloading the JLab Air ANC App in Apple/Google Play Store
WARNING
Fully dry off the earbuds before placing In the charging case. If the earbuds are damp or wet. this will cause damage to the charging case. The warranty will be voided if the charging case shows damage by water/sweat.
TROUBLESHOOTING
No audio in one earbud or earbuds are disconnected (Manual Reset)
- Enter your Bluetooth device settings and forget the JLab Epic Air ANC. Fig A
- Keep the earbuds in the charging case and on ONE earbud quickly tap the touch sensor 7x times. Light blinks blue 4 times. Fig B
- Repeat with other earbud. Quickly tap the touch sensor 7x times. Light blinks blue 4 times. Fig C
- Take both earbuds out of the charging case. Wait for one earbud to turn solid white and one to blink blue/white. You are now ready to pair to your Bluetooth device.
Bluetooth device does not connect/reconnect
- Enter your Bluetooth device settings and forget the JLab Epic Air ANC. Fig A
- Turn OFF then ON Bluetooth. Fig B
- Take the earbuds out of the case. Wait for one to turn solid white and one to blinking blue/white.
- Select “JLab Epic Air ANC” in devices settings to reconnect.
Quick 7× times
Instructional videos at: JLABAUDIO.COM/MANUALS
FREE GIFT
when you register this product jlabaudio.com/register
Product updates
How-to tips
FAQs & more
Gift for US only. No APO/FPO/DPO addresses.
3 MONTHS FREE TIDAL
With purchase. Visit jlabaudio.com/tidal
US Compliance
FCC Information
FCC ID: 2AHW-EANC2
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes or modifications not expressly by the party responsible for compliance could void the users authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EU Compliance
PEAG LLC dba JLab Audio hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the RED directive.
A copy of the EU Declaration of Conformity is available at jlabaudio.com/compliance
JLab Audio
2281 Las Palmas Drive, Suite 101, Carlsbad, CA 92011, USA
The symbol above indicates that this product and/or battery should not be disposed of with household waste. When you decide to dispose of this product and/or its battery, do so in accordance with local environmental laws and guidelines.
Battery Caution & Disposal Information
Please take care of your battery. Do not: disassemble, bum, puncture, crush or bend your battery. Improper operation of the battery may product smoke. In such an event, ventilate the area. Extinguish any flames with carbon dioxide, dry-powder fire extinguisher, or cover with sand or mud. Take care to avoid conditions of excessive moisture for prolonged periods and do not immerse. Do not expose to temperatures above 50°C/122°F. Charge battery fully before storage or if stored for longer than three months.
Disposal
At the end of its life, please take care to dispose of this product
responsibly. Electronic products and batteries contain materials that can be
harmful to the environment. Please do not dispose to unsorted waste. Take your
electronic waste to a designated collection or recycling facility to be
recycled properly. Your local council authority will be able to tell you where
your nearest facilities are. There may be one at your local supermarket.
JLab can help you recycle. Learn more
jlabaudio.com/recycle
Contact Us
If you’re unsatisfied with your purchase, please contact us and we’ll take
care of you! You can contact our US based customer support team:
Website: jlabaudio.com/contact
Email: support@jlabaudio.com
Phone U.S.: +1 405-445-7219 (Check
hours jlabaudio.com/hours) Phone U.K.: +44 (20)
8142 9361 (Check hours jlabaudio.com/hours)
Visit jlabaudio.com/warranty to initiate a return or exchange.
Visit jlabaudio.com/safety to learn how to safely use, including the proper tip installation.
Our team is constantly improving your product experience. This model may have new features or controls which are not detailed in this guide. For the latest version of the manual, please visit www.jlabaudio.com/manuals
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>