TAOTRONICS TT-BA014 Wireless Adapter User Guide

taotronics TT-BA014 Wireless Adapter

Product Diagram

1. Mode Switch
2. AUX Output
3. OPT Audio Output
4. OPT Audio Input
5. AUX Input
6. Micro USB Charging Port
7. Power Switch
8. Multifunction Button (Charging Indicator)
9. OPT / AUX Mode Switch Button
10. Volume –
11. Volume +
12.  Device A / B Indicators
13. Codec Indicators
14. OPT / AUX Indicators
15. RX / TX / Bypass Indicators

Package Contents

• 1 x TaoTronics Wireless Adapter (TT-BA014) 1 x 3.5mm Audio Cable
• 1 x 3.5mm Female to RCA Male Cable
• 1 x USB Charging Cable
• 1 x Optical Cable
• 1 x User Guide

Cable Connection

Button Control

modes

Multifunction Button| Tap twice to enter paring mode
Tap once to play / pause music in RX mode
When the device is on, tap and hold for 7 seconds to

turn on / off the HD mode

Tap and hold it and plug in the charging cable at the

same time to restore to factory settings

OPT / AUX Mode Switch Button| When the device is on, tap once to switch between

OPT / AUX mode

Volume +| Tap to increase volume in RX mode
Tap and hold to turn to next track in RX mode
Volume –| Tap to decrease volume in RX mode
Tap and hold to turn to previous track in RX mode

How to Use

Charging

1. Connect the Micro USB charging port with an active USB port via the included charging cable, charging will start automatically.
2. The charging indicator will stay solid red during charging and turn off once charging is completed.

Note:

• You can use the adapter while it is being charged. There might be a current sound if the battery level or quality is low.
• It is recommended to fully charge the adapter when using it for the first time or before putting it away for storage.
• Charge the adapter at least once every 3 months when not used for a long time.

Pairing in TX Mode

1. Set the adapter to TX mode, connect it to your Non-Bluetooth audio transmitting device.
2. Place your Bluetooth audio receiving device like earphones/speakers within 3 feet / 1-meter range and set it to pairing mode.
3. Turn on the adapter and tap Multifunction Button twice to enter pairing mode. The TX indicator will flash fast blue. After approximately 10 seconds, the pairing will complete with the TX indicator staying solid blue.

Note:

• When connected with OPT Audio Input, please set your audio transmitting device to PCM mode.
• The adapter is unable to pair with audio transmitting devices e.g. smartphones in TX mode.
• To clear the pairing history in TX mode, tap and hold the Volume + for 7 seconds with the TX indicator and charging indicator flashing twice at the same time.

Pairing in RX Mode

1. Set the adapter to RX mode, connect it to your Non-Bluetooth audio receiving device.
2. Turn on the adapter and tap the Multifunction Button twice to enter pairing mode with the RX indicator flashing fast blue.
3. Activate the Bluetooth function on your transmitting device (phone/tablet) and search for nearby Bluetooth connections.
4. Find “TaoTronics TT-BA014” in the search results, tap on the name to connect. Once connected, the RX indicator will stay solid blue.

Note: The adapter will try to repair the last connected device when turned on.

Pair with Two Devices at One Time

In TX Mode
In TX mode, the adapter is able to pair with two pairs of Bluetooth stereo earphones/speakers at the same time.

1. Pair the adapter with the first audio receiving device as instructed above.
2. Set the second audio receiving device into pairing mode. Tap the Multifunction Button on the adapter twice until the TX indicator keeps flashing. The connection will be completed after approximately 30 seconds.

Note:

• Please make sure there are no other Bluetooth devices within range during the connection.
• When paired with two devices, both can play music at the same time.

In RX Mode
In RX mode, the adapter is able to pair with two Bluetooth devices like phones and tablets at the same time.

1. Pair the adapter with your first device as previously instructed.
2. Tap the Multifunction Button twice to bring the adapter into pairing mode, pair the second device with it as instructed above.

Note: When connected with two devices, only one device can play music at any time. You have to stop the music on one device to play that on the other.

Bypass Mode
Set the adapter to Bypass mode, and the Bypass indicator will stay solid on.

OPT indicator keeps on

AUX Input to OPT Output| Tap the OPT / AUX Mode Switch Button again, both the OPT and AUX indicators will stay on with the AUX

indicator lighting up first.

OPT Input to AUX Output| Tap the OPT / AUX Mode Switch Button one more time, both the OPT and AUX indicators will stay on with the

OPT indicator lighting up first.

Auto Shut off

• In TX mode, the unit will shut off automatically if the battery level is low.
• In RX mode, the unit will shut off automatically if the battery level is low or there is no connection in 10 minutes.

References

• TaoTronics Official Site - Technology Enhances Life
• User Manual - TaoTronics – TaoTronics US user ico-collapse ic-expand ic-cross-line-top ic-close-circle

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>