MAXIM LIGHTING 21231 Scoop 1 Light Vanity Instruction Manual
- August 20, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 21231 Scoop 1 Light Vanity
Product Specifications
- Item/Model Number: 21231 Scoop 1-Light Vanity
- Socket: 1 x E26, 60W (Not Included)
- Power: 120V
Product Usage Instructions
Assembly
- Identify components: A, B, C, D, E, F, G
- Connect components as per the diagram in section 3 of the manual
- Ensure proper connection of Ground Wire (Green Wire), Positive (L), and Neutral (N)
Installation
- Mount the assembled fixture securely to the desired location
- Connect the socket to a compatible E26, 60W bulb (not included)
- Ensure the power source is 120V before turning on the fixture
FAQ
Frequently Asked Questions
- Q: What type of bulb should I use with this vanity light?
- A: The vanity light requires a single E26 socket bulb with a maximum power of 60W. Make sure the bulb is not included.
- Q: How do I properly connect the ground wire during assembly?
- A: The green wire is the ground wire. Connect it securely following the provided diagram in section 3 of the manual.
- Q: Can this vanity light be used in a bathroom?
- A: It is recommended to check the product specifications and ensure it meets the required safety standards for bathroom use before installation.
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to install it.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation!
- Keep packaging materials away from children.
Lamp Care And Maintenance
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution: there is a risk of shock!
- Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
PARTS
Before getting,started, ensure the package contains the following components:
INSTALLATION INSTRUCTION
More Information
Lamping: 1 x E26 60W ( Not Included )
Please consult a qualified electrician prior to install
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>