soundmaster TR250 Portable Bluetooth Speaker and Alarm Clock Radio Instructions
- June 6, 2024
- soundmaster
Table of Contents
soundmaster TR250 Portable Bluetooth Speaker and Alarm Clock Radio
ENVIRONMENTAL PROTECTION
Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices. This is indicated by the symbol on the product, user manual or packaging
The materials are reusable according to their markings. By reusing, recycling
or other forms of utilization of old devices you make an important
contribution to the protection of our environment.
Please contact your local authorities for details about collection points.
WARNING:
Risk of electric shock Does not open!
Caution: To reduce the risk of electric shock, do not remove the cover
(or back). There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.
This symbol indicates the presence of dangerous voltage inside the enclosure,
sufficient enough to cause electric shock.
This symbol indicates the presence of important operating and maintenance
instructions for the device
Used batteries are hazardous waste and NOT to be disposed of with household
waste! As a consumer, you are legally obligated to return all batteries for
environmentally responsible recycling – no matter whether or not the batteries
contain harmful substances*)
return batteries free of charge to public collection points in your
community or shops selling batteries of the respective kind. Only return fully
discharged batteries *) marked Cd = cadmium, Hg = mercury, Pb = lead
- Only use mercury and cadmium-free batteries.
- Used batteries are hazardous waste and NOT to be disposed of with the household waste!!!
- Keep batteries away from children. Children might swallow batteries.
- Contact a physician immediately if a battery was swallowed.
- Check your batteries regularly to avoid battery leakage.
- Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
- CAUTION: Danger of explosion if battery is incorrectly replaced
- Replace only with the same or equivalent type
WARNINGS:
Safety, Environmental and Setup Instructions
- Use the device in dry indoor environments only.
- Protect the device from humidity.
- This apparatus is for moderate climates areas use, not suitable for use in tropical climates countries.
- No objects filled with liquids, such as vases, shall be placed on the apparatus.
- The mains plug or an appliance coupler is used as the disconnect device, the disconnect devices shall remain readily operable.
- Connect this device to a properly installed and earthed wall outlet only. Make sure the mains voltage corresponds with the specifications on the rating plate.
- Make sure the mains cable stays dry during operation. Do not pinch or damage the mains cable in any way.
- A damaged mains cable or plug must immediately be replaced by an authorized service center.
- In case of lightning, immediately disconnect the device from the mains supply.
- Children should be supervised by parents when using the device.
- Clean the device with a dry cloth only.
- Do NOT use CLEANING AGENTS or ABRASIVE CLOTHS!
- Do not expose the device to direct sunlight or other heat sources.
- Install the device at a location with sufficient ventilation in order to prevent heat accumulation.
- Do not cover the ventilation openings!
- Install the device at a safe and vibration-free location.
- Install the device as far away as possible from computers and microwave units; otherwise radio reception may be disturbed.
- Do not open or repair the enclosure. It is not safe to do so and will void your warranty. Repairs only by authorized service/ customer center.
- No naked flame sources, such as lighted candles, should be placed on the unit.
- When you are necessary to ship the unit store it in its original package. Save the package for this purpose.
- In case of malfunction due to electrostatic discharge or fast transient (burst), remove and reconnect the power supply.
- If the unit is not using for a long period of time, disconnect it from the power supply by unplugging the power plug. This is to avoid the risk of fire
LOCATIONS OF CONTROLS
Description Function
- Display Announce time, FM reception frequency and other information’s
- / Mode Switch ON / OFF and select FM, USB and Bluetooth®
- Memory Setting Clock; Alarm1&2; Autostore & recall FM stations to preset
- BACK Backward button
- FORWARD Forward button
- Vol. / Sleep Adjust Volume and set Sleep function
- USB Socket USB socket for playback MP3 files
- DC IN – 5V Power supply socket
- SOCKET Headphone socket
INITIAL USE
Before the operation, please make sure that the VOLTAGE mentioned on the power supply is same as the voltage of your local area.
Mains Power:
Connect the mains adapter (included) to the DC 5V IN socket and the mains
socket. Disconnect the mains adapter from the mains socket if you want to
switch the unit off completely.
Battery Power:
Insert 4*AA batteries (Not included) correctly by following the polarity (+ or
-) indications in the battery compartment.
When the DC power supply is connected to DC IN batteries are disabled, If no
batteries are inserted unit will lost settings in power failure.
Clock Display time
For initial use, the unit will automatically display time “0:00” in standby
mode.
Auto return to clock display mode when no operation in 30 s.
Display protection foil
Pls. remove the display protection foil from the screen at the first use.
BASIC OPERATIONS
- Press / Mode button to enter the working mode.
- Press and hold / Mode button to turn off the unit in standby mode.
- Press and hold / Mode button when the unit is in Standby to switch off the display announcement.
Selecting Modes
Press the / Mode button repeatedly to switch between modes (FM / BT / USB)
Adjusting Volume
Turn the volume -/+ dial to decrease/increase the volume. Total 16 level
volume and it displays 00-15
ERP power management ( BT/USB Mode Only)
- The unit will switch to standby mode ( ERP) if there is not input signal in 15mins under BT/USB mode.
- Remark: In FM mode can’t into ERP power management
- Press / Mode on the front to wake the device up from standby mode.
FM RADIO
To switch the unit from BT / USB to FM mode, press the “ / Mode” repeatedly until “tu” is displayed.
Auto Store
To search for an FM station, you need to press and hold the “Memory” button.
The unit will scan from 87.5MHz-108MHz. Once a station has been found, the
station will be save in P01-P20.
Auto Tune
To search FM station automatically, press and hold the < or > buttons The auto
search is starting and it stops at the next available station.
Manual Tune
To search FM station manually, press the < or > buttons repeatedly until your
desired frequency is reached.
Recalling a Preset Station
For preset recall press the “Memory” button. Press “Memory” repeatedly to
select your desired preset station number from P01-P20. Each press will skip 1
number.
USB Operation
To switch the unit from BT/FM to USB mode, press the / Mode button repeatedly until USB is displayed.
- Insert the flash drive with MP3 (WAV and MP3).
- The unit will auto-read the files and play.
- Press ”Memory“ to control PLAY/STOP
- Press < or > button for last or next song.
Bluetooth Operation:
To switch the unit from USB / FM to BT mode, press the / Mode repeatedly until BT is displayed.
Connection:
BT flash to indicate the unit is searching for the device for pairing. Check
the device list under your BT setting in the smart playing device.
Selected TR250 and connected. (If code is needed, 0000/1234) Tone announces
that the connection is successful. Press and hold “Memory“ to disconnected the
BT device.
Press the “Memory” button to fast connect again with the device. Remark: If BT
leaves the reception area (10 meter/30 feet), the device will auto-connect
with the device if the device come back to the reception area in 10 mins.
Operation:
Press “Memory” to control PLAY/STOP
Press < or > button for previous or next song.
CLOCK FUNCTIONS
- Time setting (24 Format)
- Set the unit in standby mode.
- Press and hold “Memory“ for 2 seconds.
- Press < or > repeatedly when finding the display “CL” flicker
- Press “Memory“ again to enter the time setting. “0:00 ” flicker.
- Press < or > to choose the Hour and press „Memory“ to confirm the setting. Press < or > to choose the min and press „Memory“ to confirm the setting. Finished time setting and press / Mode to quit the setting.
ALARM SETTING
Set the unit in standby mode.
Alarm 1 or 2 sets:
- Press and hold ”MEMORY“ for 2 seconds.
- Press < or > repeatedly when finding the display “AL1” or “AL2” flicker
- Press ”MEMORY“ to enter the “AL1” or “AL2” setting.
- Press < or > to switch from “off” ,”on” and “set”
- Press ”MEMORY” to enter alarm signal setting when “set” is flicker,
- Press < or > to switch from “TU”(FM), “BU”(Buzzer), USB, and selected the wake-up signal. Press “MEMORY” to confirm the selection and enter to Alarm time setting.
- Press < or > to choose the Hour and press “MEMORY” to confirm the setting.
- Press < or > to choose the min and press “MEMORY” to confirm the setting.
Snooze:
Press “VOLUME/SLEEP“ to enter the Snooze function.
The alarm will be active every 9 mins
Turn Off Alarm
Press / Mode to stop the alarm when then AL1 or AL2 is on.
SLEEP MODE SETTING
- Switch the unit on.
- Press and hold “VOLUME/SLEEP“ to enter the sleep setting.
- Press < or > repeatedly to select the “0FF” “10”-“90” and press “VOLUME/SLEEP“ again to confirm the sleep mode.
- The sleep mode start counting down after confirmation, when the time is elapsed the unit is switching off.
HEADPHONE
Turn down the volume before connecting the earphones. To listen to music
privately, use headphones with a 3.5 stereo jack plug and connect it to the
headphones socket. The speakers will then be muted.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
TECHNICAL SPECIFICATIONS
-
Power adaptor: Input: AC 100-240V~ 50/60Hz 0.2A max
Output: DC 5 V -
Battery operation DC 6V 4 x 1.5 V AA / LR6
-
Frequency Range FM 87.5 – 108 MHz
Bluetooth® 2.4 – 2.48 GHz -
Supported file types: MP3, WAV
IMPORTER
Wörlein GmbH Tel.: +49 9103 71 67 0
Gewerbestrasse 12 Fax.: +49 9103 71 67 12
D 90556 Cadolzburg Email: service@woerlein.com
Germany Web: www.woerlein.com
Copyright by Woerlein GmbH, 90556 Cadolzburg, www.woerlein.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>