soundmaster PDB1850 Portable DVD Player with Two 25.6cm LCD Screens Instruction Manual
- June 2, 2024
- soundmaster
Table of Contents
- soundmaster PDB1850 Portable DVD Player with Two 25.6cm LCD Screens
- Product Information
- Product Usage Instructions
- Safety, Environmental and Setup Instructions
- QUICK START GUIDE
- INSTALL THE BRACKET ON THE CAR HEADREST
- REMOTE CONTROL
- CONTENT OF DELIVERY
- BASIC OPERATION
- DVD SETUP MENU
- TROUBLESHOOTING
- TECHNICAL SPECIFICATIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
soundmaster PDB1850 Portable DVD Player with Two 25.6cm LCD Screens
Product Information
Specifications:
- Model: PDB1850
- Country of Origin: Germany
- Power Source: AC Adapter or 12V Car Adapter
- Display Format Options: 4:3 Normal PS, 4:3 Normal LB, 16:9 Wide
- Language Options: Multiple languages for on-screen display
Product Usage Instructions
General Information:
The PDB1850 is a versatile multimedia player designed for entertainment on the
go. It comes with a remote control, AC adapter, car adapter, audio/video RCA
cables, and a user manual.
Basic Setup:
- Ensure you are using the provided AC or car adapter.
- Check the voltage compatibility and plug the adapter into a suitable power outlet.
- Insert batteries into the remote control following the provided instructions.
Using the Device:
- Place the device on a stable surface.
- Insert a disc with the printed side facing up.
- Slide the ON/OFF switch to turn on the device. Wait for the disc to be read before playback.
- Use the remote control to navigate through menus, adjust volume, start/pause playback, and access additional features.
Advanced Settings:
You can customize various settings such as TV monitor format, OSD language,
audio settings, and more. Refer to the user manual for detailed instructions
on accessing and adjusting these settings.
Frequently Asked Questions (FAQ):
-
Q: What should I do if a battery is swallowed?
A: If a battery is swallowed, seek immediate medical help. Swallowed batteries can cause serious internal burns. -
Q: How do I charge the device?
A: Use the provided AC adapter or 12V car adapter to power the device. The red LED indicates that the battery is charging.
Safety, Environmental and Setup Instructions
ENVIRONMENTAL PROTECTION
- Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices. This is indicated by the symbol on the product, user manual or packaging
- The materials are recyclable according to their labelling. By reusing materials or other forms of recycling old devices and packaging, you are making an important contribution to protecting our environment. If necessary, remove batteries and personal data before disposal free of charge and ask your local authority about the responsible disposal point
WARNING
Risk of electric shock Do not open!
Caution:
To reduce the risk of electric shock, do not remove the cover (or back). There
are no user-serviceable parts inside. Refer servicing to qualified service
personnel.
- This symbol indicates the presence of dangerous voltage inside the enclosure, sufficient enough to cause electric shock.
- This symbol indicates the presence of important operating and maintenance instructions for the device
- Used batteries are hazardous waste and NOT to be disposed of with household waste! As a consumer you are legally obligated to return all batteries for environmentally responsible recycling – no matter whether or not the batteries contain harmful substances*)
- Return batteries free of charge to public collection points in your community or shops selling batteries of the respective kind. Only return fully discharged batteries
marked Cd = cadmium, Hg = mercury, Pb = lead
- Only use mercury and cadmium-free batteries.
- Used batteries are hazardous waste and NOT to be disposed of with household waste!!!
- Keep batteries away from children. Children might swallow batteries.
- Contact a physician immediately if a battery is swallowed.
- Check your batteries regularly to avoid battery leakage.
- Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
- CAUTION: Danger of explosion if battery is incorrectly replaced
- Replace only with the same or equivalent type
WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
- This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
- Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
CAUTION
INVISIBLE LASER RADIATION WHEN OPENING THE COVER OR PRESSING THE SAFETY
INTERLOCK. AVOID EXPOSURE TO THE LASER BEAM.
- To prevent possible hearing damage, do not listen at high volume levels for long periods
- Use the device in dry indoor environments only.
- Protect the device from humidity.
- This apparatus is for moderate climates areas and is not suitable for use in tropical climates countries.
- No objects filled with liquids, such as vases, shall be placed on the apparatus.
- The mains plug or an appliance coupler is used as the disconnect device, the disconnect devices shall remain readily operable.
- Connect this device to a properly installed and earthed wall outlet only. Make sure the mains voltage corresponds with the specifications on the rating plate.
- Make sure the mains cable stays dry during operation. Do not pinch or damage the main cable in any way.
- A damaged mains cable or plug must immediately be replaced by an authorized service centre.
- In case of lightning, immediately disconnect the device from the main supply.
- Children should be supervised by parents when using the device.
- Clean the device with a dry cloth only.
- Do NOT use CLEANING AGENTS or ABRASIVE CLOTHS!
- Do not expose the device to direct sunlight or other heat sources.
- Install the device at a location with sufficient ventilation to prevent heat accumulation.
- Do not cover the ventilation openings!
- Install the device at a safe and vibration-free location.
- Install the device as far away as possible from computers and microwave units; otherwise, radio reception may be disturbed.
- Do not open or repair the enclosure. It is not safe to do so and will void your warranty. Repairs only by authorized service/ customer centre.
- No naked flame sources, such as lighted candles, should be placed on the unit.
- When you are necessary to ship the unit store it in its original package. Save the package for this purpose.
- In case of malfunction due to electrostatic discharge or fast transient (burst), remove and reconnect the power supply.
- If the unit is not using for a long period, disconnect it from the power supply by unplugging the power plug. This is to avoid the risk of fire.
- The device is equipped with a “Class 1 Laser”. Avoid exposure to the laser beam as this could cause eye injuries.
QUICK START GUIDE
- Connect the power source
- Press the “OPEN“ button
- Open the disc cover
- Insert the disc
- Close the disc cover
- Move the “ON/OFF” button in one position The player is reading the disc. Waiting for reading completed. The disc will be played successfully.
MAIN UNIT
-
A VOL+
Adjust the volume level -
B VOL-
-
C Stop playback
-
D Play previous
-
E next chapter/title/track
-
F Start and pause the playback
-
G Operating, charging indicator and remote control sensor
SLAVE MONITOR
-
A VOL+
Adjust the volume level -
B VOL-
-
C MUTE Switch the speaker off/on
-
D OFF/ON OFF/ON Switch
-
E Select menu options
-
F MENU Open the settings menu
-
G Select menu options
INSTALL THE BRACKET ON THE CAR HEADREST
- Install the bracket on the screw hole on the back of the DVD player
- Loosen the screws on the side of the bracket and fasten the bracket to the two pillars under the headrest.
- Adjust the machine angle if required
REMOTE CONTROL
-
On/Standby
-
Volume down
-
Selection/Enter frame-by-frame To select press and press OK
Frame forward/backward in pause press ◄/► -
SETUP Open the setup menu (except in AV mode)
-
AUDIO switching left-right channel
-
Play or pause in audio or video playback
-
Stop audio, video or photo playback
-
A-B set point A and B for loop playback
-
ZOOM press repeatedly for 2x, 3x, 4x, 1/2, 1/3 zoom
-
REPEAT repeat the loaded disc
-
SUBTITLE enable subtitle
-
USB/CARD selection of DVD; USB and card mode
-
Mute the sound
-
Volume up
-
MENU opens the main menu of DVD
-
Fast for-/backward
-
Play the previous chapter/title/track
-
SLOW press repeatedly for 1/2, 1/4; 1/8 or 1/16 playback
-
DISPLAY turn on or off the main LCD screen
BATTERY INSTALLATION
- Remove the battery compartment cover on the back side of the remote control.
- Insert two AAA batteries with the correct polarity into the battery compartment (see illustration in the battery compartment).
- Close the battery cover again.
CONTENT OF DELIVERY
- Main unit & slave unit
- AC adapter
- 2 x Headphones
- AV/DC connection cable
- 2 x Headrest bracket
- Remote control
- Car 12V adapter
- Audio-/video cable
- Instruction manual
BASIC OPERATION
- Use only the supplied power adapter /car adapter! Make sure that the mains voltage corresponds to that on the rating label of the AC adapter.
- Connect the AC adapter to the right side of the device and an electrical outlet.
- The charging indicator on the device lights up:
- Red LED on: The battery is charging.
- Green LED on: The batterie is fully charged Connect the slave monitor as shown in the picture.
SWITCH ON/OFF
- Switch the main unit with the “ON / OFF” switch on the top side and the slave monitor with the “OFF/ON” swich on the right side ON.
- To prevent accidental discharge of the built-in battery, please slide the “ON / OFF” switch to the OFF position when the device is not in use.
ERP power management
The device automatically switches to standby after 20 minutes if no playback
takes place. To turn the device back on, turn the power off and on again.
SOURCE SELECTION
- Install disc, USB or card correctly in the main unit.
- Press “USB/CARD” to select DVD; USB or card function, wait for the read and start the playback .
VOLUME ADJUSTMENT
Press the “VOL –“ / “VOL +” button on the unit or the “ / ” on the remote
control to adjust the volume.
MUTE
Press the “ “ button to switch off the volume. Press the button again to
switch on the volume.
DVD SETUP MENU
- In DVD mode, press the “SETUP” button to enter the setup menu.
- Use the cursor buttons “ ” to select the preferred item. Press “OK” to confirm
- After finishing settings, press “SETUP” again to go back to normal display. The following menu items can be changed:
- GENERAL SETUP PAGE
- AUDIO SETUP PAGE
- PANEL QUALITY SETUP PAGE
- PREFERENCE PAGE
GENERAL SETUP PAGE
- TV DISPLAY: Adjustment of the display format (4:3 Normal PS, 4:3 Normal LB or 16:9 Wide).
- ANGLE MARK: You can choose different camera angles when the movie supports this feature.
- OSD LANG: Selection of the preferred screen display language
- SCREEN SAVER When set to ON the screen saver appears after some time in PAUSE or STOP mode.
- LAST MEMORY When set to ON the unit memorize the last play duration. The unit will start play from the last play position again.
- MP3 LYRIC lf you want to show the lyrics of a song, please load lyrics and music as the same name in a USB or Memory card before performing this function. Choose an MP3 file. Download the corresponding lyrics with the extension “.Ire” from the Internet or create it with a lyric file editor (not included). Rename the lyrics file. Make sure that the lyrics filename is the same as the music file name.
AUDIO SETUP PAGE
The audio menu allows you to change the audio setup of the DVD.
- DOWN MIX Set down mix to LT/RT, Stereo.
- DUAL MONO Set to Stereo, L-Mono, R-Mono or Mix-Mono.
- DYNAMIC Full 3/4, 1/2, 1/4, OFF
PANEL QUALITY SETUP PAGE
The video menu allows you to change the display properties of the DVD.
- SHARPNESS Adjusts the screen’s sharpness.
- BRIGHTNESS Adjusts the screen brightness.
- CONTRAST Adjusts the screen contrast.
- SATURATION Adjusts the screen saturation.
- HUE Adjusts the screen hue.
- ASPECT RATIO Setup panel display to 16:9 or 4:3
PREFERENCE PAGE (The setting is only available when no media is inside the
unit.)
The preference menu option allows you to adjust the default DVD setting.
- TV TYPE Set TV Type to PAL, AUTO, or NTSC.
- AUDIO Set the default audio language. [Subtitle] Set the subtitle language.
- SUBTITLE Switching Subtitle function on / off
- DISC MENU Set the disc menu language.
- DEFAULT Return the portable DVD to factory default beyond the maximum output of the speaker in sound effects processing.)
SLAVE MONITOR SETTINGS
- Press “MENU” on the slave unit to open the menu.
- Press “MENU” repeatedly to toggle: PICTURE; VOLUME; OPTION; SYSTEM
The following options can be changed with the “ / ” buttons:
-
PICTURE: BRIGHT; CONTRAST; COLOR; LANGUAGE
Picture bright; contrast, and color language -
VOLUME: default Volume
Volume default volume -
OPTION: RESET; ZOOM
Option reset; picture format -
SYSTEM: S-ROLOC
System colour system
The values can be changed with “VOL –“ or “VOL +” when needed.
AV OUT
You can connect the device to an external device (such as a TV, projector,
etc.) to view content on the device.
- Insert the jack plug of the enclosed AV cable into the “AV-OUT” socket of the device and the 3 RCA plugs of the cable into the external device. If the device does not have these connections, you will find corresponding adapters in the specialized trade.
- Switch the connected device to the corresponding input and start playback on the device.
HEADPHONE
- You can connect headphones to the device. Plug the headphones into the 3.5 mm headphone jack on the right side of the unit.
- The sound via the built-in speakers is switched off.
- To prevent possible hearing damage, do not listen at high volume levels for long periods.
TROUBLESHOOTING
WARNING:
Before requesting after-sales service, please check this possible resolution.
Risk of electric shock. Never remove the casing of the product. To keep the
warranty valid, never try to repair the product yourself.
No reaction to the remote control| · Insert the batteries correctly.
· Point the remote control at the IR sensor located on the front panel of this product. (operate within 5 meters and 30 degrees)
· Put new batteries into the remote control.
---|---
No picture/sound| · Make sure the connection is in good condition; the
volume is not too low;
the audio receiver or TV works normally; the audio setting is proper.
No picture on the AV connection| · If this player is connected to an unauthorized display device with an AV cable, the audio/video signal may not be displayed
· Check if the AV cable is faulty. lf faulty or damaged, replace the AV
cable.
The audio signal not playing on the TV| · Ensure that the audio cables are connected to the audio input of the TV
· Assign the audio input of the TV to the corresponding video input. See
the TV user manual for details.
The disc cannot be played| · Please clean the laser and the discs with alcohol
· Our DVD player doesn’t support Blu-Ray or pirated.
Data Files cannot be played or read| · Ensure that the data file was recorded in the standard UDF, ISO9660 or JOLIET format.
· Ensure that the JPEG file extensions are jpg, JPG, jpeg or JPEG.
· Make sure your USB drive or SD card does not have a storage capacity greater than 32GB.
· Make sure the video resolution does not exceed 720p.
- The current instruction manual can be downloaded from www.soundmaster.de.
- Technical changes and misprints reserved.
- Copyright by Woerlein GmbH, 90556 Cadolzburg, www.soundmaster.de.
- Duplication only with the permission of Woerlein GmbH
TECHNICAL SPECIFICATIONS
Manufacturer – AC adaptor| Wörlein GmbH, Gewerbestrasse 12, D-90556 Cadolzburg www.soundmaster.de
HRB-Nr. 771 bei Amtsgericht Fürth/Bay.
---|---
AC adaptor – Model identifier| THX-120150KDV
Power input| 100-240V~ 50/60Hz 0.65A max.
Power output| 12.0V 1.5A 18.0W
Average active efficiency| ≥ 85.8%
Low load efficiency 10%| ≥ 75.3%
No load power consumption| ≤ 0.1W
Built-in battery| 7.2V, 5000mAh
USB capacity| 32GB/Format FAT32
CD/DVD format| H.264; MPEG-1; MPEG-2MPEG-4 VCD/СD-МРЗ/JPEG
DVD-Video DVD+/-R/RW CD-R/CD-R/W;
Audio power output| 2 x 1.5W RMS
Wörlein GmbH
- Gewerbestraße 12 D 90556 Cadolzburg, Germany
- Tel: +49 9103 71 67 0
- Fax: +49 9103 71 67 12
- E-Mail: info@soundmaster.de
- Internet: www.soundmaster.de.
Hereby, Wörlein GmbH declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/30/EU;2014/35/EU; 2009/125/EC; 2011/65/EU. A copy of the declaration of conformity can be obtained from the above address.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>