Yiwu Hanmao E Commerce Firms XX07-YS05 Tesla Coil Arc Wireless Transmission Instructions
- June 6, 2024
- Yiwu Hanmao E Commerce Firms
Table of Contents
Yiwu Hanmao
E-Commerce Firms XX07-YS05 Tesla Coil Arc Wireless
Transmission Instructions
Product introduction
This is a multi-functional small Tesla coil, Tesla coil can produce a high frequency and high voltage electric field, and through the discharge end to generate an arc. High-frequency and high-voltage electric fields can excite some lamp-containing gas so that the lamp can light up, which is to light the lamp separately from the sky. At the same time, this Tesla coil adds audio modulation to the circuit, so when a music signal is an input, the arc will emit music sound and become a plasma loudspeaker. The top of this coil is designed with different discharge terminals which can be replaced, thus achieving the effect of ion wreath of ion windmill.
Usage method
Step 1: Open the package and check the products and accessories, which
include Tesla coil, switching power supply, 3.5mm audio line, discharge
needle, ion windmill accessories, ion wreath accessories, neon lamp, and two
instructions.
Step 2: Test the music playing function, install discharge needle on
Tesla coil, plug-in power supply, connect Tesla coil, open power switch, Tesla
coil starts to work. One end of the audio line is plugged in a Tesla coil, and
the other end is connected to a music output device (mobile MP3 computer,
etc.). Play music on the device and the music will be emitted from the arc.
Step 3: Test the spacer lighting. Hold the metal foot of the neon lamp in
your hand and slowly approach the Tesla coil. When the neon lamp reaches a
certain distance, the neon lamp will glow. If you have other gas-containing
lamps (such as a fluorescent incandescent lamp, part of the rare gas lamp),
you can also do the same with the open-air lighting experiment. When the top
of the Tesla coil is not placed with any accessories, it will not generate an
arc and can improve the distance and effect of the lighting, but it is not
recommended to use this operation for a long time!
Step 4: Test the ion windmill, turn off the power switch, and stop the
Tesla coil. Remove the top discharge needle and put on the ion windmill
accessories. Then turn on the power switch and the Tesla coil works. The arc
will eject from both ends of the ion windmill accessories and start to drive
the windmill to rotate.
Step 5: Test the ion wreath, turn off the power switch and stop the Tesla
coil. Remove the ion windmill accessories and install the ion wreath
accessories. Then turn on the power switch, the Tesla coil works, the arc
sprays from the top of the ion wreath, and because of the instability of the
thin wire of the ion wreath, it begins to shake and scratch. If we start the
delayed shooting function when the ion wreath starts to eject arc (the delay
is set to about 3 seconds), then we will take a cool picture.
Principle introduction
- Principle of plasma loudspeaker: Audio signal modulates the working voltage of Tesla coil through the circuit. When a music signal is an input, the working voltage of the Tesla coil will change with the rhythm of music, thus affecting the intensity of air heated by arc, resulting in the vibration of air along with the music signal, which produces music sound wave.
- Principle of insulating lighting: Tesla coil will produce a high-voltage and high-frequency pulsed electric field. When the gas lamp enters this electric field, the gas in the lamp will be broken down by the high-voltage electric field and flow through the weak current, so as to emit light. The distance and effect of lighting are related to the intensity of the electric field and the density of gases in lamps.
- Ion windmill ion wreath principle: arc heating air will make air flow, thus generating thrust, make windmill rotation, make the wreath shake.
Thank you for your appreciation of the product! If you have any questions, please contact Sales Customer Service.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.