TOMADO TFS4003B Pedestal Fan Instruction Manual

**TOMADO TFS4003B Pedestal Fan Instruction Manual

**

SAFETY INSTRUCTIONS

• First carefully read the instruction manual in full prior to using the appliance and store the manual in a safe place for future reference.
• Only use this appliance for the purposes described in the instruction manual.
• Caution: never insert objects into the ventilation grid when the appliance is switched on.
• Only connect the appliance to alternate current, with a mains voltage that corresponds with the information provided on the information plate of the appliance.
• Never bend the power cord sharply or allow it to run across hot parts.
• Fully unwind the cord to prevent it from overheating.
• Never place the appliance near appliances that give off heat, such as ovens, gas cookers, hotplates, etc. Keep the appliance away from walls or other objects that could catch flame, such as curtains, towels (cotton or paper, etc.).
• Always make sure the appliance is placed on an even, flat surface.
• Only use the appliance indoors.
• Do not leave the appliance unsupervised if the appliance is operational.
• If you want to move the appliance, make sure the appliance is switched off.
• Do not use the appliance if the plug, cord or appliance are damaged, or if the appliance no longer functions properly or if it is damaged in any other way. If this is the case, consult the retailer or our maintenance service.
• If the cord of the appliance is damaged, it should be replaced by the manufacturer, his customer service or a similarly qualified person in order to prevent hazardous situations.
• Never replace the plug or cord yourself. Repairs to electrical appliances should only be performed by skilled persons. Incorrect repairs may expose the user to serious hazards.
• Never use the appliance with parts that are not recommended or supplied by the manufacturer.
• Do not pull the cord and/or appliance to remove the plug from the wall socket. Never touch the appliance with wet or damp hands.
• Never connect the appliance to an external timer or a separate remote control system, in order to prevent hazardous situations.
• Keep the appliance out of reach of children. Children do not see the dangers associated with handling electrical appliances. Therefore, never allow children to operate electrical appliances without supervision. Keep the appliance and cord out of reach of children younger than 8 years of age.
• The appliance can be used by children of 8 years and older and persons with a limited physical, sensory or mental capacity or lack of experience or knowledge, provided they use the appliance under supervision or have been instructed about its safe use and understand the hazards involved.
• Children must not play with the appliance.
• The appliance may not be cleaned or maintained by children, unless this is done under supervision.
• If the appliance is not being used or is being cleaned, fully switch off the appliance by removing the plug from the socket.
• Extension cords may only be used if the mains voltage (see the information plate) and capacity are identical to or higher than that of the appliance. Always use an approved extension cord.
• Never submerge the appliance, cord or plug in water.
• This appliance is intended for household and similar use, such as:
  • in staff kitchens, shops, offices and other work environments;
  • by guests of hotels, motels and other residential environments;
  • in Bed & Breakfast type environments;
  • farms.
• If the appliance is not used as intended, no compensation can be claimed in case of defects or accidents and the warranty will be invalidated.
• If you decide to stop using the appliance due to a defect, we recommend cutting the cord after removing the plug from the wall socket.

PRODUCT DESCRIPTION

1. Protective guard – front
2. Fastening cap
3. Fan blade
4. Lock ring
5. Protective guard – rear
6. Motor shaft
7. Oscillation pen
8. Motor casing
9. Operating buttons
10. Tube
11. Pedestal adjusting nut
12. Pedestal
13. Foot

ASSEMBLY

Before using the fan for the first time, please proceed as follows: carefully unpack the appliance and all components and remove all packaging material and any promotional stickers.
Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Assemble the fan in accordance with the instructions.

1. Start by placing the cross foot at the pedestal. Click the pedestal in the round base of the cross foot – fig. 1.

2. Slide the four cross parts firmly in the round base – fig. 2.

3. When you attach the cross parts correctly, you will hear a click for each part – fig. 3.

4. Loosen the pedestal adjusting nut and pull the tube upwards to the required height. Fasten the pedestal adjustment nut when the tube is at the required height.
   Note: if you are unable to see the tube, it is possible that it has fully disappeared in the pedestal. Loosen the pedestal adjusting nut and carefully hold the pedestal upside down – fig. 4 and 5.

5. In order to attach the motor part to the pedestal, you must first loosen the wing nut at the bottom of the motor part. Slide the motor part on the tube in line with the groove of the tube and tighten the wing nut – fig. 6.
   

6. Loosen the fastening cap (or take it from the bag) and loosen the lock ring. Attach the rear part of the protective part on the motor shaft and fasten it with the lock ring – fig. 7.

7. Place the fan blade on the motor shaft and make sure that the slot of the fan blade properly fits over the pen of the motor shaft. Fasten the fan blade with the fastening cap – fig. 8.
   Test the fan blade by rotating it by hand. When rotating, the blade should not create any friction with the lock ring. If it does, remove the fan and repeat all steps from the start.

8. Place the front protective guard on the fan and use the clamps to attach it to the rear protective guard – fig. 9.

   • Align the front protective guard with the rear protective guard using the positioning clamp on the bottom side in order to attach both parts to each other properly. Use the bolt and nut at the top of the guards to attach the guards to each other.
   • Press the clamps downwards in order to attach the front and rear protective guards to each other.

9. Place the fan on a flat, stable surface. Clean the exterior of the fan using a slightly damp cloth and then wipe it with a dry cloth.
   The fan is ready for use.
   

OPERATING THE PEDESTAL FAN

Place the pedestal fan on a flat, stable surface. Insert the plug in a socket.

Switching on/off
Press one of the position buttons 1 to 3 to switch on the fan. By pressing position button 0, you switch off the appliance.

Position 0 = off
Position 1 = lowest position
Position 2 = middle position
Position 3 = highest position

Oscillation
This fan is able to oscillate (swerve to the left and right) for a better air displacement. Press in or pull out the oscillation knob.
If you want to change the wind to an upward or downward direction, you can simply tilt the fan head upwards or downwards.

Adjusting the height of the pedestal
In order to adjust the height, loosen the pedestal adjustment nut and move the fan upwards or downwards. Properly hold on to the fan when loosening the pedestal adjustment nut, so it cannot drop down unexpectedly. Re-tighten the pedestal adjustment nut when the fan is at the required height.

CLEANING AND MAINTENANCE

Before cleaning the fan, you must switch it off by pressing position button 0 and remove the plug from the socket.

• Wipe the exterior of the appliance with a slightly damp cloth and dry properly.
• If necessary, you can clean the protective guard using a vacuum cleaner (nozzle).
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Never submerge the fan in water or any other liquid.

RECYCLING

This symbol means that this product should not be disposed of with regular household waste (2012/19/EU). Observe the rules that apply in your country for the separated collection of electric and electronic products. Correct disposal of the product prevents negative consequences for the environment and for public health. The packaging material of this product can be recycled 100%, return packaging material separately

References

• Klantenservice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>