CalAmp LMU-3030 Versatile OBD-II Telematics Device Instruction Manual
- June 4, 2024
- CalAmp
Table of Contents
LMU-3030 Versatile OBD-II Telematics Device
Instruction Manual
The LMU-3030™ is an easy-to-install, flexible OBD telematics device designed to meet the needs of the growing connected car economy. It is an ideal solution for passenger or light-duty vehicle applications where access to the vehicle diagnostics interface (OBD-II) is essential for monitoring vehicle health and driver behavior.
LMU-3030™ Technical Specifications
Cellular/Network
Americas Variant
HSPA/UMTS| 850 (V)/1900 (II) MHz
GSM/GPRS| 850/1900 MHz
Global Variant I
HSPA/UMTS| 800 (VI)/850 (V)/900 (VIII)/1900 (II)/2100 (I) MHz
GSM/GPRS| 850/900/1800/1900 MHz
Global Variant II
GSM/GPRS| 850/900/1800/1900 MHz
Data Support
SMS, UDP Packet Data, TCP
Satellite Location (GNSS)
| Constellation Support | Hybrid GPS, SBAS Engine (WAAS, EGNOS, MSAS, GAGAN) |
|---|---|
| Channels | 50 Channel |
| Tracking Sensitivity | -162 dBm |
| Acquisition Sensitivity | -148 dBm (cold start) |
| Location Accuracy | ~2.0m CEP Open Sky (GPS SBAS 24 hours static) |
| Location Update Rate | Up to 4 Hz |
| Geo-Fence | 32 PEG-Zones (rectangular/circular) |
1024 Geo-Zones (polygon/circular – 5400)
AGPS Location assistance capable
Comprehensive I/O
Accelerometer| Built-in, triple-axis (driver behavior, impact detection,
motion sensing, tilt detection)
---|---
Status LEDs| 3 (OBD, GPS, cellular)
Serial Interface| 2-wire TTL serial interface (optional fit)
Certifications
| Industry Certifications | FCC, CE, IC, PTCRB, RoHS |
|---|
Cloud/Software Services¹
PULS™| Monitor, manage, upgrade firmware, configure and troubleshoot devices
remotely
---|---
CTC| Device data stream via RESTful APIs
Edge Intelligence¹
| PEG™ | Update device functionality or develop new on-the-edge applications |
|---|
Electrical
Operating Voltage| 9-16 VDC Vehicle Systems
9-30 VDC (start-up, operating)
7-32 VDC (momentary)
---|---
Power Consumption| Typical 4.9mA @ 13V (deep sleep)
Typical 83mA @ 13V (normal operation)
Typical 66mA @ 13V (SMS, UDP connection, GPS off)
Typical 114mA @ 13V (continuous transmit)
Temperature| 30° to +75° C (connected to primary power)
40° to +85° C (storage)
---|---
Humidity| 95% RH @ 50° C non-condensing
Shock and Vibration| SAEJ1455
ESD| CE, GCF, eMark
Physical/Design
| Dimensions | 1.85 x 2.63 x 1.18” (47 x 67 x 30mm) |
|---|---|
| Weight | 1.83 oz. (52 g) (w/ battery) |
| Enclosure | Rugged textured plastic |
Interface Standards
| Bluetooth | Bluetooth 4.0 Dual Mode (optional fit) |
|---|---|
| OBD-II Interface | J1850 PWM, J1850 VPW, ISO-9141-2, ISO-14230, KWP 2000, |
ISO15765
CAN
OBD Data Extraction
| Detection | Automatic detection of vehicle interface services |
|---|---|
| Extraction | Transmission of standard OBD-II codes, plus manufacturer-specific |
codes which are made available by the embedded OBD firmware stack
Scripts| The download of vehicle-specific diagnostic scripts dependent on
vehicle model variant
Mounting
Via built-in OBD-II connector
Self-adhesive mounting with OBD-II extender cable
¹ Subscription service enabled. Contact sales rep for additional details.
CALIFORNIA PROPOSITION 65
WARNING:
This product can expose you to chemicals including Carbon black and Nickel,
which are known to the State of California to cause cancer, and Bisphenol A
and 1,3-Butadiene, which are known to the State of California to cause birth
defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
L3030Q319DS V3
© 2020 CalAmp. All specifications are typical and subject to change without
notice.
¹ Subscription service enabled. Contact sales rep for additional details.