HEIMKINOWELTEN DE Laser TV Lowboard Integrated Installation Guide
- June 1, 2024
- HEIMKINOWELTEN DE
Table of Contents
HEIMKINOWELTEN DE Laser TV Lowboard Integrated
INSTALLATION GUIDE
Please read this guide completely and make sure you understand everything before installing this product.
Caution
1. Avoid looking directly into the projector while in operation.
2. Make sure there are no wires in the path of the adjustable platform.
3. In the case of sudden power failure, you must reset the adjustable
platform or it will not be in the correct position
Please DO NOT disassemble or remove part(s) from the product
Expandable Laser TV Cabinet Accessories
Installation Steps
1.1 Preliminary Preparation
1. Find a suitable place where you want to place the cabinet. Arrange the left, middle, and right cabinets together to ensure the cabinet is placed steadily.
2. Pick up USB Extender 1 and connect it to the projector’s USB port.
3. Pick up USB Extender 2 and connect it to the middle cabinet’s USB port.
4. If you need to use a fan, remove the protective cover from the temperature sensor.
1.2 Connect the Power and Data Cables
1. Pull out the expandable stand of the middle cabinet, place the projector into the tray of the middle cabinet, connect the control cabinet’s USB cable to USB Extender 1, and also plug the floor rising screen receiver into USB Extender 1.
2. Place the floor rising screen into the TV cabinet’s recess, and connect the power of the floor rising screen.
3. If necessary, connect the fans of the left, middle, and right cabinets to USB Extender 2.
4. Connect all power supplies; at this point, the cabinet’s expandable stand will retract.
Adjust Memory Position
1. Initial Testing
Use the remote control to turn on the projector and test if the expandable
stand and floor rising screen are working properly.
If not, please check the connections of the projector, cabinet, or floor
rising screen with the USB.
2. Position Calibration
After everything is working properly, use the remote control to adjust the position of the projector and screen. After adjusting to the suitable position, let it sit for more than 30 seconds, then cut off the power and restart the power of the TV cabinet to successfully save the cabinet position.
Enjoy your movie time.
FAQ
1. The TV cabinet does not sync with the projector
1. Make sure the projector is turned on.
2. Ensure all power and connection cables are correctly connected.
3. Use a power bank or mobile phone charger to replace the projector to test
if the USB connection is working properly.
2. The cooling fan does not start
1. Make sure the protective cover of the temperature sensor has been removed.
2. Ensure the fan is connected to USB Extender 2.
3. The expandable stand stops at the incorrect position
After adjusting with the remote control, wait for 30 seconds before cutting off the power.
4. The projector cannot fit into the cabinet
The tray of the expandable stand is removable. Use a screwdriver to remove the tray for more space.
Installation Tips
1. You can place a power strip inside the middle cabinet so all the power
cables can be centralized inside, making it more elegant.
2. You can use the provided spacers to adjust the floor rising screen,
allowing cables to pass underneath.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>