Lianxiang Technology V5 4 In 1 Fast Wireless Charger User Manual

4 IN 1 Fast Wireless Charger

User manual

Notice:

1. To ensure the charging safely and normally, you must use 12V/2A or 9V/2.7A adapter and quick charge cable (if use other adapter or cable, it may not charge phone fast, or may not simultaneously charge 4 devices or may even damage the charger);
2. Please update Apple Watch to the latest system to charge good.

Product Introduction

The 4-in-1 wireless charger, a compact charging house, powered from only one outlet, can charge 4 devices simultaneously. For charging your mobile phone and apple watches, just put them on; For your Airpods, Airdots or some other TWS, all this will make your desk clean and tidy, and make your life easier.

The charger is so space-saving designed that can help you integrate your mobile phone intelligent life very well, In particular, it gives apple users a more convenient experience, showing that the green light is on standby, the blue light is charged, and the blue green light switches to a flashing foreign object or the phone is out of alignment!

Product Appearance

1. USB
2. Charge phone area
3. Charge iWatch magnetically area
4. Charge Airpods area
5. Non-slip mat
6. LED Intelligent light
7. Type-C port
8. Non-slip mat
9. Product tag
10. Heat dissipation Holes

Operation Steps

1. Connect the charger to a 12V/2A or 9V/2.7A adapter through a type-C quick charge cable to switch on the power;

2. Put your phone on then charge;

3. Put the apple watch on and suck it up to charge
   (roll the watchband to minimize to charge better);

4. Plug your earphone case in the connector to charge
   (ensure the Airpods or the Airdots case is facing forward, and others base on their situation).

Light color instructions

Green light is on : Standby mode or not charging the phone

Blue light is on : Wireless charging the phone

Blue and Green light flash : Foreign body is detected or the phone is misaligned (the phone charging will automatically stop)

Charging Schematic Diagram

Charge iOS+Andriod devices

Charge the phone horizontally
(support charging phone with non-metal shell)

Applicable Devices

1. Smart Phone:
   Apple: iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone X, iPhone Xs, iPhone Xs Max, iPhone XR, iPhone 8, iPhone 8 Plus
   Samsung: GalaxyS10, S10+, S10e, S9, S9+, Note 9, S8, S8+, Note8, S7, S7 edge, etc.;
   Huawei: P50, P50 Pro, Mate 40 Pro, Mate 40 Pro+, Mate 40 RS, Mate 30, Mate 30 RS, Mate 30 Pro, Mate 30E Pro, P40 Pro, P40 Pro+, P30 Pro, Mate 20 Pro, Mate RS
   Xiaomi: 11 Ultra, 11 Pro, 11, 10s, MIX 4, 10, 10 Pro, 9, 9 Pro, 9X, MIX 3, MIX 2S
   Including other devices with wireless charging receiver built-in;
   (Note: All devices must meet the Qi standard).

2. Smart Watch:
   Apple: iWatch Series 1,2,3,4,5, 6 ,7.

3. Earphone:
   Apple: Airpods 2, Airpods 3, Airpods 4;
   Including some other TWS bluetooth cases.

Product Specification

Input: 12V/2A or 9V/2.7A
Phone Output: 15W/10W/7.5W/5W
Watch Output: 2.5W (Apple iWatch Series 1,2,3,4,5)
Earphone Output: 2.0W Lightning & Micro-USB
(Apple Airpods 2,3; and some other TWS)
Input Interface: Type-C port
Transmission Distance (Phone): ≤8mm
Conversion Rate (Phone): ≥73%
Product Size: 18410992MM

Accessories List

Wireless Charger 1, Type-C quick charge cable1, User manual*1

Attention

1. Please keep the charger away from water or other liquid;
2. If you need to clean the charger, please make sure it is not connected power supply;
3. Using Environment temperature remains 0-45°C.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>