Lianxiang Technology S36 Magnetic 3-In-1 Wireless Charger User Manual
- June 6, 2024
- Lianxiang Technology
Table of Contents
Lianxiang Technology S36 Magnetic 3-In-1 Wireless Charger
Product Introduction
Charge your iPhone 12/13 series device, Apple Wa.tch, and Air Pods at the same
time with our Magnetic 3..:m-fW1reless Charger. The,re’s a 15-watt wireless
charging stand, an amagnetic charging module for Apple Watch, and a pad to
wirelessly charge your AirPods. Charge All Your Apple Gear, All at Once.
App cable Devices
For Phone|: iPhone 13 Pro Max
iPhone 12 Pro Max iPhone 12 Pro: iPhone 13 Pro
iPhone 12: iPhone 13
iPhone 12 mini: iPhone 13 mini
For Watch
Apple Watch 2/3/4/5/SE/6/7
For headset
AirPods2,Pro, Xiaomi AirDots Youth version,Redmi AirDots & some other TWS
wireless charging with phone
Product Specification
- Input: 9V /2A, 12V /2A: Type-C cable
- Output: 1. Phone 7.5W 2. Watch 2.5W 3, Airpods 2-SW: Type-C cable: User manual
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consu It the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
LED lamp changed to be blue and green flashing during wireless charging process then means charging failed.
The following situation can cause failures, like charging slowly, stopping charging, over-temperature for charging position.
- The adapter is not run up to standard (No PC USB output power supply).
- The charging cable is not up to standard.
- The smartphone does not support wireless charging functions.
- There is metal behind the Phone
Attention
- Please keep the charger away from water or other liquid.
- If you need to clean the charger, please make sure it is not connected to the power supply.
- Using Environment temperature remains 0-45’t.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>