Home Aesthetics MiPodz i15 TWS Earbuds User Manual
- June 6, 2024
- Home Aesthetics
Table of Contents
Mipodz i15
User Manual
Welcome to use the Bluetooth series products of our company, in order to make you skilled in using this product, please learn this operation manual carefully before using it.
Technical SDecs:
- Product Name: TWS
- product Model: Mipodz 115
- Bluetooth Version: V5.1+EDR
- Wireless Range:12m
- Wireless Frequency:2.402–2.480GHZ
- Transmission Power: Class 2
- Battery Capacity:40mAh
- Charge Voltage:5V
- Wired Charge Time: About 1 hour
- Working Time:3-4 hours
- Standby Time:7-10days
- Weight: About3.5g
Warming Tips:
- DONT disassemble this product
- Please use a qualified USB adapter and cable to charge
Pairing:
Power ON:
Method: The charging compartment flips open, the charging comportment button presses 1 to charge the headset, then presses the headset to boot and automatically pair.
Pairing:
Then open the mobile phone and click Bluetooth to search, click “connect” to connect when there is equipment ” Mipodz i15 ” showing.
Operation:
- Press and hold for 5 seconds to turn off the machine.
- Double—click the right ear to match, only the blue light flashes for 3 seconds, and the light is turned off after connecting the mobile phone.
- Double—click the left and right channels to pause playback.
- 3 hit the left channel prompt tone for the previous song
- 3 hit the right channel prompt tone for the next song
- long-press two seconds prompt tone for SIRI
- the caller double—click the left and right channel prompt tone to listen to and double—click the left and right channel prompt tone to hang up
- the caller long press for about two seconds, the channel prompt tone is rejected after the full charge turns to blue light, shut down
Answer/hang-up ( Double click twice)
Play/pause (Double click twice)
Next song (Double dick on the right ear tree times
Previous song ( Left ear doable click three times)
Summon SIRI (Long press for two seconds )
Shut down (Long press for five seconds )
Charging
Charging: There is a synchronous battery status indication shown on the mobile phone, please charge your earphones when there are audio reminders of low battery.
Charging the charge box
You can connect your charge box with an attached cable to a 5V USB charger to charge it when it’s out of battery. The red indicator on the charge box will flash during charging and the red light is on after full charging.
Charging the earbuds
Put earbuds in the charge box to charge when needed. Press the”on ” button, the blue LED light on the charge box is on, then close the charge box’s cover and the red light is on. The red light will turn to blue color after full charging. Please turn off your charge box( the earphone will turn on automatically and it will turn off automatically after 3-5 minutes ) Close the output power in the charge box.
Package Contents:
- 1x Bluetooth headset
- lx User manual
- 1x USB Cable
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license- exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
FCC ID: 2AYTF-I15 IC: 26927-115
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>