Wonderful ST0206 7-In-1 Smart LED Solar Light User Guide
- June 6, 2024
- Wonderful
Table of Contents
Wonderful ST0206 7-In-1 Smart LED Solar Light
BEFORE YOU BEGIN
Please read these instructions completely and carefully.
This User Guide complies with international safety regulations including all Specification in accordance with international safety standard.
Product Parameters
Product Name: | 7 in 1 Smart Led Solar Light |
---|---|
Battery: | ICR18650 (6600mAh / 4400mAh / 2200mAh Available) |
Solar Panel: | 128.4mm*111mm |
Charge Port: | Type – C |
Power Bank: | Output current 500mA – 700mA |
Luminous Flux: | Max.300lm |
Total Led Power: | 23.4W (SMD 5700K 45pcs, 3000K 45pcs, RGB 30pcs) |
Color Temp.: | 3000K – 5700K + RGB |
Dimming: | 10% – 100% |
Working Temp.: | -20 – +40℃ |
Standby power: | 1.5mA |
Protecting Rating: | IP65 |
Product Material: | Plastic + Aluminum |
Communication: | Bluetooth Mesh |
Protocol: | 5.0 |
Standard: | SIG general standard |
Control Mode: | Manual touch switch Mobile app direct connection control |
Remote control (Gateway required)
Group control
Intelligent voice control (Gateway required)
Control Distance:
30-50m one jump, maximum 8 jumps
Function:
30-50m one jump, maximum 8 jumps
Music rhythm, Timing function, Energy saving mode Scene mode (9 scene mode
including Read, Candle, Night, Ocean, Dream, Iridescence, Halloween, Prairie,
SOS mode.)
Working Time:
9 Scene Mode : Brightness 100 %/ 50 %
| Working time| Charging Time (2A charger)
6600mAh| 8-9/ 16-18 hours| 3-4.5 hours
4400mAh| 5-6/ 10-12 hours| 2-3hours
2200mAh| 2 – 3 / 4 – 6 hours| 1-1.5 hours
Solar Mode: Energy saving mode
| Working time| Solar charging
2200mAh| 8-12 hours| 5-8 hours
LifeTime:
25,000 hours
Amazon,Alexa and all related logos are trademarks of Amazon.com, Inc. or its
affiliates.
Google Assistant” is a trademark of Google LLC.
Package List
Standard Package
The standard package can accompany you through all kinds of journeys, whether
you carry it in your hand, hang it on your bag or put it in your tent.
The light can also be used as an emergency charging station to charge your
electronic equipmentthrough solar energy.
Accessory Package
The accessory package provides more possibilities for outdoor lighting. You
can set the light on a variety of outdoor ground, whether it is grassland,
desert, snowfield or sand.
(‘The Ground Package is accessories and needs to be purchased additionally.)
Full Package
The Full Package including: Light fixture and all accessories and waterproof bag.
Function Instruction
-
ON / Solar Mode/ OFF
(1) Press this button to switch between light on, solar mode and light off.
(2) Long press this button for 5 seconds to disconnect from the current smartphone app and wait for pairing again.
(3) Solar Mode: The light turn on automatically at dark and turn off during the day. (The light will flash 3 times when enter this mode.) -
Scene Mode
Press this button to switch between 9 scene modes including Read, Candle, Night, Ocean,
Dream, Iridescence, Halloween, Prairie, SOS mode. -
Power switch K1
This button is a self-locking switch. Turning off this switch will turn off all lighting functions of the light. (The power bank function and solar charging function will not be affected.)
Tips: ① Please turn on the K1 switch with the needle When using for the first time.
② Please turn off the switch when transporting or not using for a long time.
-
Type-C port
(1) Use 5V2A or above adaptor to charge the light quickly.
(2) Use the light to charge the smartphone and other electric devices.
Charge and Power Bank discharge indicator:
Bluetooth Pairing App introduction
-
Use your smartphone to download the “Wonderful Home” App .(Search in the App store or Google Play, or directly scan QR code to download the App.)
| |
---|---|--- -
Turn on the light which will automatically enter pairing mode. (Make sure the light is not connected to another smartphone at this time.)
There are two ways to reset the light to pairing mode:
(1) Use the needle to stab the Switch K1 three times.
(2) Long press the button “ON/ Solar Mode/ OFF” of the solar light for more than 5 seconds. -
Open the App, register and log in, then follow the next steps:
① Open the app and tap “Add Device” or the”+” on the top right.
② Tap “Auto Scan” on the top.
③ Wait a moment at this step.
④ Tap “Done” to complete pairing after the device appears.
On/Off switch: Control light on/off.
Solar energy: The light turn on automatically at dark and turn off during
the day.
Colour: RGB color light.
White: Warrn white & Cool daylight.
Brightness: Adjust brightness value.
Recommended Scene: 9 scene modes, including Read, Candle, Night, Ocean,
Dream, Iridescence, Halloween, Prairie, SOS mode.
Rhythm, Game, Romantic : 3 music rhythm modes. The lights change with the
rhythm of the music and sound.
Schedule: Setthe time when the lightturns on and off.
Low Power Setting: When the remaining power is too low, the device will
automatically adjust the brightness. Manual brightness adjustment is not
allowed.
Quick linkage: Link the light with other intelligent devices and turn it
on in the corresponding scene.
Warning
- To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions.
- Before use,Please confirm whether all the spare parts are complete.
- All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts out, or use any parts that are worn out or broken.
- Always switch off the power supply before installation
- Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
- Do not hang it in strong wind or violent shaking, which may cause personal injury and light damage.
- The installer must ensure thatthe foundation is stable and can support the luminaire’ s weight.
- Keep combustable and other materials that can burn away from luminaire and light/lens.
- Do not mountto flammable or combustible surfaces.
- This light fixture has been designed to be used in operation temperatures between -20C &SOC. If light fixture is used in other ambient temperatures the life of the battery may be reduced or not work properly.
- When replacing the battery please use same specifications as indicated on the supplied battery .
- Professional personnal are required to repair or replace the battery. We are not responsible for the unavailability caused by disassembly by non Professional personnal.
- Close and seal the silicone cover of Type-C port when not in use. Only open it when charging, and do not open it at other times, so as not to reduce the waterproof and dustproof grade.
- The fixing screws on both sides must be tightened and cannot be removed to prevent infiltration of water and dust, otherwise protection cannot be achieved
- If the fixing screws on both sides are removed, the bracket on the light fixture will fall off. If the fixed screw is re-screwed to install the bracket, the bracket may not be installed. Therefore, unscrewing fixed screws is not recommended.
- Clean the light fixture with a dry duster do not use abrasives or solvents and avoid liquids on all electrical parts.
- If in doubt consult a qualified person or licensed electrician in order to avoid hazard.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Keep product out of children’s reach.
Application Scenarios
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(l) This device may not cause harmful interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a class B digital device,pursuantto Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequence energy and, if
not installed and used in accordance with the instructions.may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio (Ntechnician for help.
The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.
IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.
Made in china
Documents / Resources
|
Wonderful ST0206 7-In-1 Smart LED Solar
Light
[pdf] User Guide
ST0206, 2A4AQST0206, ST0206 7-In-1 Smart LED Solar Light, 7-In-1 Smart LED
Solar Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>