Wonderful Home D10 Wireless Doorbell Instructions

D10 Wireless Doorbell

Product Information:

• Model: D10/D11

• Installation Method: Double-sided adhesive for the waterproof
  cover and screws for the bottom of the waterproof case

• Settings and Adjustments: Volume adjustment, ringtone
  selection, pairing mode, factory reset

• Components: Transmitter button, Volume button, Music button,
  Indicator light, Speaker

Product Usage Instructions:

Installation:

1. Peel off one side of the double-sided adhesive and stick it on
   the back shell of the waterproof cover.

2. Tear off the other side of the double-sided adhesive, stick it
   on the wall or door, and press it with appropriate strength to
   ensure compliance.

3. Place the transmitter in the waterproof case.

4. Fix the bottom of the waterproof case with screws.

Pairing with Single Doorbell Receiver:

1. Press and hold the ‘Volume’ button to freely adjust the
   volume.

2. Press the ‘Music’ button to select your favorite ringtone.

3. Press the ‘Volume’ button and wait for 5-7 seconds until you
   hear a ‘ding’ sound and see the blue LED light flashing on the
   receiver, indicating it is in pairing mode.

4. Trigger the transmitter button to send a signal to the
   receiver. The music will be successfully replaced.

Pairing with Multiple Doorbell Receivers:

1. Press and hold the ‘Volume’ button to freely adjust the
   volume.

2. Press the ‘Volume’ button and wait for 5-7 seconds until you
   hear a ‘ding’ sound and see the blue LED light flashing on the
   receiver, indicating it is in pairing mode.

3. Trigger the transmitter button to send a signal to the
   receiver. When you hear the ringtone, it means the operation is
   completed successfully.

Clear Factory Reset:

In the plugged-in state, keep holding down the ‘Volume’ button
of the doorbell receiver without releasing it. Release the button
after the doorbell receiver turns on with a sound “Drip”,
indicating that all launch buttons are cleared, and the host will
restore to factory settings.

Replacement Battery:

To replace the battery, refer to the user manual for detailed
instructions.

Indicator Light:

The indicator light provides visual feedback for different
states of the doorbell receiver. Refer to the user manual for
detailed information.

Volume Button:

Short press the volume button to adjust the volume in a cycle of
5 levels.

Music Button:

Short press the music button to cycle through 38 different
ringtones.

Installation Method

Settings and Adjustments

Peel off one side of the double-sided adhesive and stick it on the back shell of the waterproof cover. Tear off the other side of the double-sided adhesive, stick it on the wall or door and press it with appropriate strength to ensure that the paste is compliant. The transmitter is placed in the waterproof case, and the bottom of the waterproof case is fixed with screws.

1.Press and hold theVolume’button, and the fifth gear volume can be freely adjusted 2.Select one your favorite ringtone by pressing theMusic ‘button Press theVolume’button waiting 5-7s you will hearding’with Blue led light flashes which mean receiver mean receiver get into pairing mode. 3.Trigger the transmitter buttons to send a signal to the receiver, the music has been successfully replaced!

Prepare an electric drill, take out the expansion tube and screws in the accessories, determine the proper installation position, and measure the waterproof shell and mark the distance between the two screw holes on the wall, select a drill with the same diameter as the expansion tube, and install on the electric drill, make two holes on the wall, put the expansion tube into the hole in the wall, and put two screws through the screw holes of the waterproof shell Put in the expansion tube and tighten the screws with a screwdriver. The transmitter is placed in the waterproof case, and the screws are fixed under the waterproof case.

(Multiple transmit buttons paired with a doorbell receiver
1.Long Press the Volume’ button ,waiting 5-7s you will hearding’ with Blue led light flashes which mean receiver mean receiver get into pairing mode. 2.Trigger the transmitter buttons to send a signal to the reiver, when your hear the ringtone which means that your operation is complated successfully.

Note Press the transmit button, and the doorbell receiver will emit the ringtone. Doorbell set in the pairing state, short press any key or do not operate for 20 seconds to exit the pairing state: Clear Factory Reset In the plugged in state, keep holding down the ‘volume’ button of the doorbell receiver without releasing it, and releasing it after the doorbell receiver turns on with a sound “Drip”, indicating Clear All Launch Buttons, and the host will restore to factory settings.

(One transmit button paired with multiple doorbell receivers
1. Plug the second receiver into the power socket,Long Press the Volume’ button ,waiting 5-7s you will hearding’ with Blue led light flashes which mean receiver mean receiver get into pairing mode. 2. Trigger the transmitter buttons to send a signal to the reiver, when your hear the ringtone which means that your operation is complated successfully.

Model:D10/D11

Quick Guide and Kind tips
Step l: Plug the doorbell receiver (indoor unit) into the power outlet, and the host is ready. Step 2: Press the doorbell button of the transmitting button (outdoor station), and the bell of the doorbell receiver will ring under normal circumstances.
1.The launch button has a built-in 23A12V battery when it leaves the factory, and the launch button and the doorbell receiver have been paired before leaving the factory and can be used directly; 2.Please do not install the launch button on an iron or steel door. Iron or steel has a strong shielding effect on wireless signals, it will cause the wireless signal between the transmitter button and the doorbell receiver to fail to transmit, resulting in abnormal function; 3. The doorbell receiver is recommended to be more than 50cm away from the ground, which can improve the receiving strength of the wireless signal.
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

Replacement Battery

Indicator Light
Transmitter Button

Volume Button Music Button
Speaker

Volume button: Short press to adjust the volume of 5 in cycle Music button: Short press to cycle through 38 ringtones

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>