Wonderful Platform OCTOS AI Terminal User Guide
- June 6, 2024
- Wonderful Platform
Table of Contents
Wonderful Platform OCTOS AI Terminal User Guide
Before use
Read entire Safety Notes section regarding potential hazard and proper instructions before using. Any modification, repair or changes that made by the party who is not certificated cannot be eligible for any warranty. We shall not be liable for loss of use of the instrument or other incidental or consequential damages, expenses, or economic loss, or for any claim or claims for such damage, expenses or economic loss. Failure to observe instructions can result in severe injury.
Do not attempt to service this product yourself.
Do not modify, repair or take any part of the device apart. To avoid fire or
electric shock or any danger, do not disassemble the device. Contact to
qualified personnel only.
Only use attachments/accessories specified by the manufacturer
Use this device only for its intended use as described in this manual. Do not
use with unauthorized accessories of devices.
Protect the device from any impact. Do not throw the product.
Do not twist or pinch the power supply cord. If the plugs or power supply
cords need to be replaced, ensure that they comply with the manufacturer’s
recommendation. Unplug the device during lighting storms and when unused for
extended periods of time.
Do not use this device near water or moisture.
Only set on dry surfaces. Do not place on surface wet from water or cleaning
solvents. Never handle the power plug with wet hands, as this could cause fire
or electric shock.
Use the device in a proper environment.
Operating temperature 0˚C–40˚C at sea level. Do not install near any heat
sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Install the product on a stable and safe place.
Do not leave the unit on an unstable place such as high shelves. it may fall
down because of the vibration of the sound.
Clean only with a dry cloth.
Unplug this product from the wall outlet before cleaning. Do not use any kind
of detergent or liquid. Liquids can cause a failure and/or a fire hazard.
Product Package
-
Octos
-
DC power Jack
-
Quick start manual
Front panel
Rear panel
Rear panel contents and functions >
How to power on
- Insert the cable into the power pack.
- Connect the JC power cord into the DC JACK power input. Red light comes on if the power cable is connected properly.
- Press the power button on the rear panel of the device. LED Indicator turns into green when the device receives power and the active screen on the front panel of the device turns on.
USB port
- You can use a wireless mouse by connecting Bluetooth Receiver into the USB port.
- Wireless mouse is used for managing the device setting
- Media files can be imported to OCTOS by inserting an additional USB drive.
- USB memory stick is not contained in the product package.
Connect Wifi
- Press the menu button( ).
- Click ‘Wi-Fi’ when the setting menu appears.
- Select your wifi from the list and enter a wifi passcode
Bluetooth pairing
- Go to the setting menu by pressing the menu button( ) on the rear of the device.
- Click ‘Enable Bluetooth’ button.
- Select your Bluetooth device from the list.
Make sure that your Bluetooth device is pairing mode.
Voice command sample
Try say this, ”Hi, Avadin” for voice command:
How’s the weather today?”
“What time is it?”
“What date is it?”
“Turn on News.”
“Turn on today’s News.”
“Play the latest music.”
“Play me some relaxing music from Youtube”
“Volume up”
“Volume down”
“Stop playing”
“Mute sounds
Features
| Items | Specification |
|---|---|
| Power Supply | DC 12.0V/5A |
| Projection Method | UST(Ultra short throw) Projection |
| Communication | WiFi Ethernet Bluetooth |
| Connectivity | HDMI |
Auxiliary Audio USB type A
Size| 284 x 514 x 284 mm (W x H x L)
Weight| Approximately 4.0kg
Operating Temperature| 0°C ~ 35°C
Humidity| 10 to 70% (no condensation)
Items| Specification
---|---
Resolution| WXGA (1366×768)
Screen size| 8.6”
Display technology| Laser LCoS (Liquid Crystal On Silicon)
CPU| Dolphin+ ( Quad Coretex-A53 1.5GHz , Single Coretex-A7 1.1GHz,
Coretex-M4 333MHz)
RAM| LPDDR4 4G
ROM| eMMC 8G
OS| Dolphin+ : Android Pie(9.0)
WiFi| IEEE 802.11ac 2X2 , 2.4G/5G
Bluetooth| 4.2 Dual mode(Classic, BLE)
Camera| CAM Fixed Focus (1280×720)
Speaker| 10W x 2
Mic| MIC x 2, Acoustic Echo Cancellation
Connectivity| HDMI output, Audio Aux, USB Ax2
Network| Gigabit Ethernet (RJ45)
Power| DC 12V/5A
Certification| KC, FCC, CE, Laser safety Class I
FAQ
The device isn’t turned on.
Please recheck whether the power cable is connected properly. Do not use
unauthorized power jack and it may cause malfunctions.
The device is making noises.
Please check if the sound is from the ventilation part. If the noises last to
loud and long, stop operating the device and contact to our customer service.
The device gets heated.
Heats may generated since the device uses electricity pretty much. Operating
the device excessively can cause too much heat. Make sure to keep clean the
ventilation part and do not cover it.
The key button doesn’t work or the device keeps pausing.
Press the power button for 5 sec. so that the device can be rebooted.
FCC Instructions
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to cared the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radiofTV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction i with any other antenna or transmitter.
Warranty and Customer Support
Warranty Certificate
Product :
Model :
Date of purchase :
Vendor :
Serial No. :
-
The warranty period is 1 year from the date of purchase.
-
Fill out the warranty certificate after purchase and keep your receipt to
confirm the date of purchase. -
If it’s difficult to identify the date of purchase, it’s alternated by the date after 3 months from the manufacture date.
In case of product failure, malfunction, etc., please contact the vendor or sales@1thefull.com. -
After the repair, any defective parts, etc. will be recalled by our company to ensure your safety.
Eligible for Free Warranty Services
- Malfunctions, failures, etc. occurring during normal use within the warranty period.
Not Eligible for Free Warranty Services
- Requesting any other services not related to malfunction, the cost can be occur. Please check the user guide before contact to our customer service.
- Failure caused by unauthorized servicing.
- Failure caused by the natural disasters. Failure caused by not following the precautions or user negligence.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>