Hyphametrics A20DC6 coreMeter User Guide
- June 5, 2024
- Hyphametrics
Table of Contents
Hyphametrics A20DC6 coreMeter
Safety Information
Read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply.
Warning
To reduce the risk of electric shock, DO NOT remove the cover (or back).
DO NOT attempt to repair the product, this could lead to the risk of injury,
damage to the product .
To reduce the risk of fire or electric shock, keep this product away from
exposed direct sunlight, naked flames or heat, large amounts of moisture,
dust, and sand. FCC Note (for U.S.A)
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of
the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/ technician for help.
- This class B digital product meets all requirements of the Canadian Interference -Causing Equipment Regulations.
Precautions
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all
the safety instructions listed below.
Keep these operating instructions handy for future reference.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- DO NOT use this apparatus near water.
- DO NOT clean with any chemical detergent. Clean only with a dry cloth. 1.2.7 DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used , use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long period of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Handling Cautions
- DO NOT expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.
- To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
- DO NOT plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.
- Before connecting other components to this player, be sure to turn them off. 1.3.5 If the product makes an abnormal noise or produces a burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer service center for technical assistance. Do not use the product. Using the product as it is may cause a fire or an electric shock.
Introduction
Package Contents
CM03
IR Remote Controller (IR RC)
Power Adapter, Input: AC100 ~ 240V, 50/60Hz, Output: 5V, 2A
Product Features
- Quad Core CPU,Penta GPU, frequency is 2.0GHz, RAM is 2G, built in 8G EMMC. Powered by Android 7.1 OS
- Built in browser and support virtual private network access
- RJ45 10/100M Ethernet interface
- Support 4k2k video local media playback from SD card or USB HDD
- Built in 802.11b/g/n AC WIFI module with antenna inside, WiFi frequency range is 2.4G/5.8G
- Rj45:Wired internet connection
- HDMI video output, connect to HD for HD video playback
- 2 external USB interface , support mobile HDD, support mouse and keyboard operating
- Support weather, calendar, and desktop clock gadgets
- Support USB mouse and keyboard operation
- Support simple IR remote control with mouse function
- Support music player, picture player and more family entertainment
- Support Micro SD card
- Support Google Chrome browser
- App Installer for application installation from USB/SD card
Remote Controller
- Power
- Mode
- Mute
- Upwards
- Towards the left
- Towards the right
- Downwards
- OK
- Return
- Home
- Background App
- Menu
- Vol+
- Notification
- Page Up
- Vol-
- Page Down
Note: Button Battery 2025 3V insert with correct polarity (+/-).
Setup Connection
Place CM03 on a flat platform near the , and make sure nothing block the remote control signal.
Display when Power Up
After power up, the will first show Geniatech logo,starting with boot
animation. When finished, it will go to Home screen.
Settings
Using Navigation (4 directions), OK, EXIT, and Menu keys of Remote Controller
to select the options, the option selected will be highlighted and confirmed
by pressing OK key. Same operation for text input if needed.
Select icon then press OK key to settings interface.
Or Select icon to settings interface. 
WiFi
- It will automatically scan ambient WiFi networks when select “ON”.
- Connect an available WiFi network. If connect a secured WiFi network, corresponding password will be input firstly. Or fail to connect and need reset password.
- Once build up the connection with a certain WiFi network successfully, CM03 will connect this WiFi network automatically when restart.
Note: If factory reset, the password of WiFi network have to be reset.
Bluetooth
Ethernet
Connect Box and Router by RJ45 network cable.
Press “ ON” in Ethernet setting, it will connect to network
automatically.
More…
VPN Edit VPN profile
- Portable hot spot
- Enable Portable hot spot
- Set up WiFi hot spot
WiFi and hot spot connection can not be applied at same time. Disconnect WiFi and connect Ethernet while using hot spot function.
Sound and notification
Sound
Increase or decrease sound volumes
Touch Sounds
Choose Other sounds,you can set touch sound , if enable Touch sound, sound
will be heard while move remote controller.
Display
Wallpaper
You can choose different wallpaper from gallery, live wallpaper and
wallpaper.
Sleep
Daydream
Font size
Change the font size of OSD
Storage &USB
Shows the storage used of the OS and SD card.
Apps
List all apps installed.
You can choose an application and force to shut down the app, uninstall the app, clear user data, move to SD card and clear cache data.
Memory
Location
Security
Language & input 
Change OSD language and input method.
The default input method is android standard keyboard.
If you are using our IR remote control, enter into “Default” option and switch
to remote controller input method.
Reset
Factory data reset
This will erase all data from your mbox’s internal storage,including:
- Your Google account
- System and app data and settings
- Downloaded apps
- Music\Photos
- Other user data
You can reset all the settings and apps to factory default.
Note: Once you choose to reset to factory default, all data/apps will be deleted.
Accounts
Google
Date time
About MediaBox
Apps Install & Uninstall
On CM03, you can install apps from Android Market over the Internet or other
sources, such as other online sources, the internal storage and the USB
storage device and SD card that you have mounted onto CM03.
You also can manage apps on CM03 and SD card, install/uninstall apps, stop
running apps, or select other options.
Firmware Update
You can download newest firmware from Geniatech Official website: www.geniatech.com
Trouble Shooting/FAQ
No Picture
Refer to the user manual for how to select the correct video input channel.
USB Content cannot be read
- The format of USB storage device is not supported .
- The supported memory size is 32G maximum.
- Make sure that this player supports these files.
Remote Controller cannot respond quickly to the pressing of keys
Make sure that batteries have enough power.
The firmware updating is not complete after a long time
If you update the firmware over the online service, it may take a long time
to download the firmware update files from the server. To save your time,
update the firmware through the SD card.
Repairs
If you contact us to repair your player, an administration fee may be charged if either:
- An engineer is called out to your home at your request and there is no defect in the product.
- You bring the unit to a repair center and there is no defect in the product.
- We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player.
- We recommend you read this manual throughly, search for a solution on line at www.geniatech.com, or contact Geniatech Customer Care before seeking to repair your player.
Specification
CPU Quad Core ARM Cortex-A53 CPU up to @ 2.0GHz GPU Mali 450 GPU @ 750MHz+(DVFS)
RAM 2G DDR3(1G optional)
ROM 8G EMMC
OS Android 6.0 OS
Optional DOLBY
USB USB2.0 x2
HDMI V2.0
DC Input 5.0V-2A
SD Slot Max: 32G Video Output HDMI/CVBS Audio Output HDMI/RCA IR receiver /
LAN RJ45 10/100M Ethernet interface
WiFi IEEE 802.11 B/G/N AC 2.4G（5.8G Optional） BT Optional
Audio Decoder Low power Media CPU with DSP audio processing
Supports MP3,AAC,WMA,RM,FLAC,Ogg and programmable with7.1/ 5.1 down-mixing
Video/Picture Decoder
VP9 Profile-2 up to 4Kx2K@60fps
H.265 HEVC MP-10@L5.1 up to 4kx2k@60fps
H.264 AVC HP @L5.1 up to 4kx2k@30fps
H.264 MVC up to 1080P@60fps MPEG-1 MP/HL up to 1080P@60fps MPEG-2 MP/HL up to 1080P@60fps MPEG-4 ASP@L5 up to 1080P@60fps
WMV/VC-1 SP/MP/AP up to 1080P@60fps RealVideo 8/9/10 up to 1080P@60fps
Multiple language and multiple format sub-title video support MJPEG and JPEG unlimited pixel resolution decoding Supports JPEG thumbnail,scaling, rotation and transition effects
Size 82X 82 X 19mm
Net Weight 159g
Trademark Notice
FCC Rules
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in United
States and other countries.
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However.
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE : This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines. This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operated
in conjunction with any other antenna or transmitter
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>