INDESIT FDUD4212 Dishwasher User Manual
- May 15, 2024
- INDESIT
Table of Contents
INDESIT FDUD4212 Dishwasher
Product Specifications
- Model: FDUD4212
- Manufacturer: Indesit Company
- Module: DEA700
- Wiring Diagram: Schema Elettrico Big Size
Product Usage Instructions
Power Supply and Heating Element:
Connect mains power supply (A) to the heating element (B) as per the wiring diagram provided.
Wash Motor and Drain Pump:
Connect the BLAC wash motor (C) and either the BLAC drain pump (D1) or synchronous drain pump (D2) based on requirements.
Other Components:
Ensure proper connection of the thermal actuator (E), door switch (F), dispenser solenoid valve (G), AC wash motor (H), fill solenoid (I), pressure switch (M), overflow switch (N), noise filter (V), and fan (W) as indicated in the wiring diagram.
Regeneration Solenoid Valve Test:
Perform the regeneration solenoid valve test using the specified procedure for DEA700 module.
Frequently Asked Questions
Q: How do I troubleshoot if the appliance is not heating properly?
A: Check the wiring connection between the mains power supply and the heating element. Ensure there are no loose connections or damaged wires.
Q: What should I do if the wash motor is not functioning?
A: Verify the connection of the wash motor to the power supply and check for any blockages in the motor mechanism. If necessary, refer to the wiring diagram for troubleshooting.
Q: How can I test the functionality of the pressure switch?
A: Follow the specified procedure in the user manual to test the pressure switch. Ensure all connections are secure and there are no leaks in the system.
WIRING DIAGRAM DEA700 Module – for Model FDUD4212
