NGS WILD DUB 1 8 Inch Trolley Speaker User Manual

NGS WILD DUB 1 8 Inch Trolley Speaker

Product Information

Specifications

• USB input
• Microphone input / Guitar input
• SD card input
• Microphone volume control
• Play / Pause button
• Mode button
• Next button
• On / Off button
• Echo button
• Guitar volume control
• AC IN port
• AUX OUT port
• AUX-IN port

Product Usage Instructions

Control Buttons
The top panel of the device features several control buttons:

• USB input: Use this port to connect a USB device.
• Microphone input / Guitar input: Use this port to connect a microphone or a guitar.
• SD card input: Use this slot to insert an SD card.
• Microphone volume: Adjust the volume of the connected microphone.
• Play / Pause: In USB / SD modes, press this button to play or pause the current track. In BT mode, tap to play or pause. In TWS mode, press and hold to connect or disconnect TWS. In AUX-IN mode, this button has no function.
• Mode: Press shortly to switch between Wireless BT, AUX-IN, USB, and SD modes. In BT mode, press and hold to disconnect Bluetooth.
• Next: Under USB / SD / BT modes, tap to skip to the next song.
• On / Off: Press to switch the device on or off. Press and hold for 2 seconds to switch off.
• Echo: Press and adjust the value with the multifunction from EC00 to EC30.
• Guitar volume: Control the volume of the connected guitar under guitar-input mode.

Back Panel Description

• AC IN: Use this port to connect the AC cable for power supply.
• AUX OUT: Use this port to connect additional speakers.
• AUX-IN: Use this port to connect an external device under AUX-IN mode.

Using the Remote Control
To use the remote control:

1. Remove the battery cover from the back of the remote control.
2. Insert 2xAAA size batteries, ensuring correct polarity.
3. Point the remote control at the LED screen when using it.

Remote Control Buttons

• Mute: Press this button to turn the sound off. Press again to turn the sound on.
• Previous: Under USB / SD / Bluetooth mode, press shortly for previous sound source.
• Mode: Press shortly to switch between Wireless BT, AUX-IN, USB (with USB card plug in), and SD (with SD card plug in) modes. In BT mode, press and hold to disconnect Bluetooth.
• REC: Under any mode, press the REC button to record sound with the connected microphone and save it to a USB stick or SD card.
• LIGHT: The color changes automatically between red, green, blue, and purple.
• Play / Pause: Under USB / SD / BT modes, this button is used to play or pause. Under AUX-IN mode, this button has no function.
• Off: Press to switch the device off. The device can only be switched on using the button on the top panel as an energy-saving measure.
• Next: Under USB / SD / BT modes, press shortly for next song.
• VOICE: Remove the original voice. This feature is disabled in AUX mode.
• REPEAT: Repeat one, repeat all, and RAMDOM (only available under USB / SD modes).
• REC PLAY: Play the recorded files from USB / SD. Press and hold to delete recorded files.
• M-PRI: Gives priority to mic voice against music.
• EQ: Use the equalizer to browse through different music styles: NOR, rock, jazz, classical, pop, country.
• 0-9 keys: Under USB / SD modes, use these buttons to select songs. For other modes, the number buttons have no function.

AUX IN, USB/SD, BLUETOOTH
To switch between different modes:

1. Press the MODE button to switch from one mode to another.
2. If the device is not connected to a USB stick or an SD card, these modes will be omitted.

AUX IN
With the attached audio cable, you can connect the device to external multimedia audio sources through the AUX port. After connection, set the mode to AUX by pressing the MODE button. The AUX indicator will be displayed on the screen, indicating that the device can play audio files from multimedia sources like PC, mobile phones, MP3 players, and MP4 players.

FAQ

• Q: How do I install the batteries for the remote control?
  A: Remove the battery cover from the back of the remote control and insert 2xAAA size batteries, ensuring correct polarity.

• Q: How do I fully disconnect the electrical cable?
  A: To fully disconnect the electrical cable, please disconnect the plug from the electrical power point it is connected to. The base of the power point should be easy to access.

CONTROL BUTTONS

TOP PANEL DESCRIPTION

1. USB input

2. Microphone input / Guitar input

3. SD card input

4. Microphone volume
   Control the microphone volume in all modes, from CV00 to CV16. In TWS mode, this function is not available.

5. Volume +/–
   Control volume in all modes, from VL00 to VL32

6. Treble +/–
   Adjust the treble, from –9 to 9

7. Bass +/–
   Adjust the bass, from –9 to 9

8. Pervious
   In USB / SD / Bluetooth modes, tap to skip back to the previous song

9. Equaliser / Mega Bass

10. Tap the equaliser to browse through different styles of music: NOR, rock, jazz, classical, pop, country

11. Press and hold: Select on / off for mega bass function

12. Play / Pause

13. Under USB / SD modes, this button is play/pause

14. In BT mode, tap to play / pause

15. In TWS mode, press and hold to connect and disconnect the TWS (5 seconds)

16. Under AUX-IN mode, this button has no function

17. Mode
    Press shortly to skip to Wireless BT / AUX-IN / USB / SD modes
    In BT mode, press and hold to disconnect Bluetooth (3 seconds)

18. Next
    Under USB / SD / BT modes, tap to skip forward to the next song

19. On / Off
    Press to switch on / Press and hold for 2 seconds to switch off

20. Echo
    Press and adjust the value with the multifunction from EC00 to EC30

21. Guitar volume
    Control the guitar volume under guitar-input mode
    BACK PANEL DESCRIPTION

22. AC IN
    For connecting the AC cable to get power supply

23. AUX OUT
    To connect more speakers togheter

24. AUX-IN
    For connecting the external device under AUX-IN mode

Note:
To fully disconnect the electrical cable, please disconnect the plug from the electrical power point it is connected to. The base of the power point should be easy to access.

USING THE REMOTE CONTROL

Installing the batteries
Remove the battery cover from the back of the remote control as shown and insert 2xAAA size batteries ensuring correct polarity.

Note: Please point at the LED screen when you are using the remote controller

1. Mute
   Press this button, sound off. Press again, sound on

2. Previous
   Under USB / SD / Bluetooth mode, press shortly for previous sound source

3. MODE

4. Press shortly to skip to Wireless BT / AUX-IN / USB (with USB card plug in) / SD (with SD card plug in) mode

5. In BT mode, press and hold to disconnect Bluetooth (3 seconds)

6. REC
   Under any mode, press “REC” button to record sound with connected microphone and record in USB stick / SD card

7. LIGHT
   The color changes from red, green, blue, purple four color automatically

8. BASS +/–
   Adjust the bass

9. M. VOL +/–
   Control the microphone volume

10. Play / Pause
    Under USB / SD / BT modes, this button is play/pause Under AUX-IN mode, this button has no function

11. Off
    Press to switch the device off. The device only switches on from the button on the top panel as an energy saving measure

12. Next
    Under USB / SD / BT modes, press shortly for next song

13. VOICE

14. Remove the original voice

15. This feature is disabled in AUX mode

16. REPEAT
    Repeat one, repeat all, RAMDOM (only available under USB / SD modes)

17. REC PLAY

18. Play the recorded files into USB / SD

19. Press and hold to delete recorded files

20. M-PRI
    Gives priority to mic voice against music

21. TREBLE +/–
    Adjust the treble

22. EQ
    Equalizer to browse through different music styles: NOR, rock, jazz, classical, pop, country

23. VOL +/–
    Control the volume

24. 0-9 keys

25. Under USB / SD modes to select songs

26. For other modes, number buttons have no function

AUX IN, USB/SD, BLUETOOTH

To switch from one mode to another press the MODE button. If the device is not connected to a USB stick or an SD card, these modes will be omitted.

1. AUX IN

2. With the attached audio cable, you can connect the device with the external multimedia audio sources through the port “AUX”. After connection, just set the mode to AUX by pressing the MODE button on the device. At this time, the AUX indicator will be displayed on the screen, suggesting the device can play the audio files from multimedia sources like PC, mobile phone, MP3 and MP4, etc.

3. Note: In AUX IN mode, the forward and rewind song functions will not operate. They must be accessed through the auxiliary device directly.

4. USB/SD CARD PLAYING
   Insert the SD card or a USB Flash memory stick into the corresponding slot. The device will automatically play any music in MP3 format on the card.

5. BLUETOOTH MODE

6. Press the MODE button until the word “BLUE” appears on the screen. The icon will start to flash. In Bluetooth mode the device goes into searching / paring / reconnect mode for pair.

7. Now, turn ON the Bluetooth function on your mobile phone.

8. Search for “NGS WILDDUB” and select it to pair (for first time pairing or pairing a new mobile device). Once connected, the icon will stop flashing.

9. The Bluetooth speaker will be reconnecting automatically if your mobile phone has been paired (Depend on the of mobile phone’s type and configuration, manual reconnection may require on some devices).

10. TWS

11. Change the two speaker in the BT mode, then press the PLAY/PAUSE button on one speaker for 5 seconds.

12. B. You will hear a beep on both speakers.

13. Search your mobile device for NGS WILDDUB and it will hook up.

BUILT-IN RECORDING FUNCTION

1. Plug in a microphone to the MIC IN input
2. Insert USB/SD card into the corresponding port, press MODE button and select USB/SD mode.
3. If the USB/SD card is plugged into the speaker for the first time, the system will automatically create a folder named RECORD to save recorded files (FAT32 USB file system is supported).
4. When you are ready to record, press REC button to go to recording mode. The current sound output will stop and the MICRO mode will be activated, the screen shows the recording time. The device starts recording when the screen shows 00:01 and users can use the microphone to record.

BATTERY MODE

1. Put the switch on the back to battery position.
2. Switch on the speaker by pressing the STANDBY button.

CHARGING THE BATTERY

1. Connect one end of the power cable to the speaker and the other end to the electricity supply.
2. A red LED will appear on the screen while it is charging.
3. When the battery is fully charged the red LED will disappear and a green LED will appear.

TECHNICAL SPECIFICATIONS

• TWS
• USB / SD / BT / AUX inputs Microphone input
• Guitar input
• LED screen
• LED lights
• AUX output
• Input voltage: AC 100V-240V 50/60Hz

• If at any time in the future you should need to dispose of this product please note that:
  • Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
  • Check with your Local Authority or retailer for recycling advice.
  • (Waste Electrical and Electronic Equipment Directive)

www.ngs.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>