Hertz CAPRI H100 Digital Media Receiver User Manual

: May 15, 2024
: HERTZ

Table of Contents

Hertz CAPRI H100 Digital Media Receiver
Product Information
Product Usage Instructions
FAQs
Precautions
FCC
BASIC OPERATION
INSTALLATION
Packaging contents
Dimensions
Technical Specifications
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hertz CAPRI H100 Digital Media Receiver

Hertz-CAPRI-H100-Digital-Media-Receiver-PRODUCT

Product Information

Specifications
- Product Name: CAPRI H100 Marine Grade Source Unit
- Model: Rev. 0.1a
- Manufacturer: Hertz
- Website: hertz-audio.com.

Product Usage Instructions

Safety Guidelines
- For your safety while boating, keep the volume at a level where external sounds can be heard.
Troubleshooting and Maintenance
- Do not open the unit or attempt to disassemble it in case of operating issues. Contact your Hertz dealer or service centre for assistance.
- If any modifications are needed, consult authorized personnel to avoid voiding the warranty.
Regulatory Compliance
- The device complies with FCC and IC regulations regarding electromagnetic interference and radiation exposure. Maintain a minimum distance of 20 cm between the unit and your body during operation.
Power On/Off
- Start the engine.
- Press the power button to turn on the device.
Installation
- Designed for boats with a negative 12V power supply.
- Read the installation instructions carefully.
- Disconnect the battery terminal before installation to prevent short circuits.
- Avoid areas with excessive heat, direct sunlight, or high engine temperatures for installation.
- Avoid locations that may interfere with boat operations or pose a risk to passengers during emergencies.
Disposal of Electronic Equipment
- Follow appropriate disposal guidelines for electronic waste in European countries with separate collection systems.

FAQs

Q: What should I do if I encounter operating issues with the CAPRI H100?
- A: Do not attempt to open or disassemble the unit. Contact your Hertz dealer or service centre for assistance.
Q: How should I adjust the volume for safe boating?
- A: Keep the volume at a level where external sounds can still be heard while on the water.

Precautions

WARNING: for your safety, while boating, keep the volume to a level at which external sounds can be heard.

1. This unit uses precision parts and components
for its operation. In the event of any operating
issues, never open the case or disassemble the
unit. Contact your Hertz dealer or service centre.

FCC

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC ID: 2ASUD-CAPRIH100
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement.

This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the unit & your body. maximum distance 20 cm between the unit & your body.

IC warning
This device complies with Industry Canada’s license-exempt RSS standard(s).

Operation is subject to the following two conditions:

This device may not cause interference
This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-0003. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. The antenna should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

WARNING: changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC: 24882-CAPRIH100
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Elettromedia srl is under license. Other trademarks and trade names belong to their respective owners.
USB Port

The USB memory sticks must be recognized as “USB” to work properly. Some models may not operate correctly. In the event data is lost or damaged under any condition, Elettromedia srl shall not be liable for any damage. When using the USB memory stick, we recommend that you back up your data (music) to a personal computer before using it.
Data (music) files may be damaged when USB memory sticks are removed while the device is reading data, or by static electricity and/or an electrical surge.
Connect/disconnect the USB memory stick when it is not accessed.
Disconnect the USB memory device when not in use.

Cleaning the Body

Use a soft, dry cloth and gently wipe off any dirt or dust.
For persistent dirt, apply some neutral detergent diluted in water on a soft cloth, wipe off the dirt gently, and then wipe again with a dry cloth.
Do not use benzene, thinner, boat cleaner, etc., as these substances may damage the body or cause the paint to peel.
Also, leaving rubber or plastic products in contact with the body for long periods may cause stains.

NMEA 2000® Connection

NMEA 2000® is a marine standard for data communication on vessels. NMEA 2000® Connection permits the CAPRI H100 control from compatible multi-function displays (MDF).
Remark: Refer to your MFD’s manufacturer for device compatibility info

CAUTIONS ON HANDLING

Protect from high temperatures.
Exposure to direct sunlight for an extended period can produce very high temperatures inside the unit.
It is recommended to protect the unit with a special cover when not in use.

WARNING:

This head unit is designed to be water and spray-resistant, but it is not designed to be submerged or to withstand high-pressure water spray.
Please exercise care when washing your boat to avoid damaging the head unit.
Do not install on submersibles, personal watercraft or any other vessel likely to be under water for even a short time.

BASIC OPERATION

WARNING: when the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may cause hearing damage. Make sure you adjust the volume in advance.

Power On/Off

Note:
- Start the engine before using this unit.
- Be careful about using this unit for a long time without running the engine.
- If you drain the vessel battery, you may not be able to start the engine and this can reduce the service life of the battery.

Start the engine.
- Engine ON position
- Press to turn the unit ON.

INSTALLATION

BEFORE STARTING

This device is exclusively for use in vessels with a negative ground 12 V power supply.
Read these instructions carefully.
Make sure the battery “-” terminal is disconnected before starting. This is to prevent short circuits during installation. (Figure 1)

INSTALLATION CAUTIONS

To avoid any interference, do not install the unit in the proximity of the engine compartment.
The use of unauthorized parts can cause permanent damage to the unit.
Always check your wire connections to ensure proper installation before turning the unit on.
Consult with your nearest dealer for proper installation or if other accessories are needed to complete the installation.
Seek assistance if modifications or drilling holes to your vessel is needed.
Do not install the unit where it will be subjected to excessive moisture, dust, dirt, foreign particles or vibration. Areas of high temperature from the engine, direct sunlight, or heat sources should also be avoided.
Do not install the unit in a location where it will interfere with the vessel operation, or it will injure the passengers if there is a sudden or emergency stop.

Information on electrical and electronic equipment waste (for those European countries which organize the separate collection of waste) Products which are marked with a wheeled bin with an X through it can not be disposed of together with ordinary domestic waste. These electrical and electronic products must be recycled in proper facilities, capable of managing the disposal of these products and components. To know where and how to deliver these products to the nearest recycling/disposal site please contact your local municipal office. Recycling and properly disposing of waste contributes to the protection of the environment and prevents harmful effects on health.