KLARSTEIN 10033801 Bella Pico 2G Food Processor Mixer User Manual
- June 6, 2024
- Klarstein
Table of Contents
KLARSTEIN 10033801 Bella Pico 2G Food Processor
**Mixer User Manual**
Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.
TECHNICAL DATA
OPTIONAL ACCESSORIES
SAFETY INSTRUCTIONS
- Before use, check the voltage on the device badge and connect the device only to sockets which correspond to the voltage of the device. If you are not sure whether your connections meet the requirements, consult an electrician or your power supplier.
- Always turn the motor off before plugging the motor into an electrical outlet.
- To prevent electric shock, never completely immerse the base in water or other liquids.
- If the power cord is damaged, it must be replaced by the manufacturer, an authorized service center, or a similarly qualified person.
- Do not bend the power cord or allow it to hang over the work surface to prevent it from getting caught.
- Do not place the appliance near open stoves, hot ovens, or easily flammable materials such as curtains or textiles.
- Before use, place the appliance on a stable, level surface.
- Children 8 years of age and older, mentally, sensory and physically impaired persons may only use the device if they have been thoroughly familiarized with its functions and safety precautions by a supervisor responsible for them and understand the associated risks.
- Ensure that children do not play with the device.
- Place the device as close as possible to the power source so that you can pull the plug quickly and easily if necessary.
- Check the power cord regularly for damage. Do not use the unit with the power cord damaged.
- Only use the unit indoors and for the specified purpose.
- Keep children away from the unit and stow it out of the reach of children.
- Do not use the device without contents and only under supervision.
- Do not touch any moving parts with your hands during use.
- Keep the operating instructions and pass on the device only with the operating instructions.
- Only use original accessories.
- Unplug the appliance from the wall outlet before cleaning or discontinuing use.
- Switch off the appliance and disconnect the plug before changing or removing any moving parts.
- The unit contains parts that are not accessible to the user. Do not remove any covers and do not attempt to repair the unit yourself. Repairs may only be carried out by qualified specialists.
- Do not connect the unit to multiple sockets, external timers or remotely controlled sockets.
Note : The device is only designed for short-term operation, i.e. it should not be operated continuously for more than 4 minutes. Then switch off the unit and let the motor cool down before switching it on again.
PRODUCT OVERVIEW
COMMISSIONING
- Unpack the device from its packaging.
- Remove the transport packaging.
- Make sure that the device does not show any signs of damage.
- Place the unit on a level, dry, non-slip surface to prevent the unit from tipping over or slipping.
- Check that the speed governor is set to „0“.
- Insert the plug into a suitable socket. The unit is now ready for operation.
OPERATION
Disassembling the unit
- Press the release lever and swing the drive arm upwards.
- To remove an attachment, press it gently and unlock it by turning it counterclockwise slightly.
- Remove the attachment.
- To remove the splash guard, pull it down. First pull the splash guard slightly downwards on the back.
- Unlock the mixing bowl by turning it slightly clockwise.
- Remove the mixing bowl .
- Press the release lever and swivel the drive arm downwards into the working position.
Speed control, switching on and off
- Switch on the unit by turning the speed governor to the right.
- Start mixing at a slightly slower speed and then increase the speed.
Recommendations for speed levels
CLEANING AND CARE
CAUTION
Risk of injury! To avoid the risk of electric shock, injury or damage, unplug
the appliance from the wall outlet before cleaning and never immerse the base
unit in water.
Cleaning the Base Unit
Note : Never use abrasive, corrosive or abrasive cleaning agents as they may damage the unit.
- Clean the base unit with a damp cloth. If necessary, you can also use some washing-up liquid.
- Then wipe with a damp cloth.
- Do not reuse the base unit until it is completely dry.
Cleaning of splash guards, dough hook, balloon whisk and beater
Note : The splash guard is dishwasher safe. The dough hook, the balloon whisk and the beater cannot be washed in the dishwasher.
- Place the parts in cold or lukewarm water to soak the dough residues. If necessary, you can also use some washing-up liquid.
- Use a dishwashing brush to remove the dough residue.
- Rinse the parts with clear water.
- Allow the parts to dry completely before using them again.
Cleaning the mixing container
The mixing bowl is made of stainless steel and can be cleaned in the sink or dishwasher.
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU this symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council or your household waste disposal service.
PRODUCER
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>