Shenzhen Miracle Intelligent Technology CC08-N1 Magnetic Wireless Charger User Guide
- June 6, 2024
- Shenzhen Miracle Intelligent Technology
Table of Contents
Shenzhen Miracle Intelligent Technology CC08-N1 Magnetic Wireless Charger
Product Specification
- Product Name: Magnetic Wireless Charger
- Input: 5VDC/3A 9VDC/2.2A
- Power: 5W/7.5W/10W/15W
- Output Port: Type-c
Manual
Put phone on the Magnetic Wireless Charger and connect to power.
Packing List
Magnetic Wireless Chargerl Specificatianl
Safety and Handling
Warning: Before using the Magnetic Wireless Charger, pis read below
safety information. Failure to follow these safety instructions could result
in fire, electric shock, injury, or damage to the Magnetic Wireless Charger or
other
property. The glass surface of the product is fragile, please handle with
care.
Liquid
Keep Magnetic Wireless Chargers away from liquids such as beverages, oils,
lotions, wash basin, tubs, and showers. Protect Magnetic Wireless Charger from
damp or rainy weather (rain, snow, fog).
Charger
When charge the Magnetic Wireless Charger, please use compatible power
adapters or third party power adapters that comply with national/regional
regulations and international and regional safety standards. Other adapters
may not reach safety standards and there may be a risk of death or injury from
using such adapters.
Technical Information
Adapter technical specification proposal
- Frequency: 50 to 60Hz, single phase
- Line Voltage: 100 to 240 VAC
- Input/Output: 5VDC/3A 9VDC/2.2A
- Maximum Output Power:15W
- Output Port:USB-C
Magnetic Wireless Charger Technical Information
- Input Voltage/Current: 5VDC/3A or 9VDC/2.2A
- Operating Temperature:0-35°C(32-95°F)
- Power: 5W/7.5W/10W/15W
FCC Statement
This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 and part 18 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and candidate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
MIRACASE INTERNATIONAL LIMITED
MIRACASE offers you 180 days warranty for our products, any questions, please
contact us.
- Web: www.miracase.com
- Email: service@miracase.com
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of the device, a distance of 15
cm surrounding the device and 20 cm above the top surface of the device must
be respected.
This device complies with Part 18 of the FCC Rules. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Increase the separation between the equipment and any other radio device.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>