UBIQUITI USW-Pro-24 Managed Switch User Guide

: June 6, 2024
: UBIQUITI

Table of Contents

Package Contents
System Requirements
Hardware Overview
Installation Requirements
Hardware Installation
Software Installation
Specifications
Safety Notices
Electrical Safety Information
Limited Warranty
Compliance
Documents / Resources

UBIQUITI USW-Pro-24 Managed Switch UBIQUITI-USW-Pro-24
-Managed-Switch-PRODUCT

Package Contents

UBIQUITI-USW-Pro-24-Managed-Switch-
FIG-1

System Requirements

Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.12.x (or newer), available at: ui.com/download/unifi
IMPORTANT:
We strongly recommend using UPS backup and power regulation toprevent equipment damage due to stability issues with local AC power.

Hardware Overview

UBIQUITI-USW-Pro-24-Managed-Switch-
FIG-2

Touchscreen Display

Bootup Animation

|

Initializing.

Steady White

|

Factory defaults, waiting for adoption.

Steady Blue

|

Successfully adopted by a network and working properly.

Location Animation

|

This indicates that you clicked Locate in the UniFi Controller software. The software will also display the location of the device on the map.

RJ45 Speed/Link/Activity LED (Ports 1 – 24)

Oﬀ

|

No Link

Amber

| Link Established at 10/100 Mbps Flashing Indicates Activity

Green

| Link Established at 1000 Mbps Flashing Indicates Activity
SFP+ Speed/Link/Activity LED (Ports 25 – 26)

Oﬀ

|

No Link

Green

| Link Established at 1 Gbps Flashing Indicates Activity

White

| Link Established at 10 Gbps Flashing Indicates Activity
RJ45 (Ports 1 – 24)

RJ45 ports support 10/100/1000 Ethernet connections.

SFP+ (Ports 25 – 26)
Reset Button

This button serves two functions for the UniFi Switch: Restart Press and release the Reset button quickly.

Restore to Factory Default Settings Press and hold the Reset button for more than

ﬁve seconds.

USP LED

The LED lights up blue when there is an active power connection on the USP DC input.

USP Connect DC Input

This DC input provides redundant power when the UniFi Switch is connected to the UniFi SmartPower Redundant Power System, model USP-RPS, via the USP Cable (not included). If there is an AC power loss or internal power supply failure, the UniFi Switch will draw power from the USP-RPS instead.

Power Port

Connect the included Power Cord to the Power port.

Installation Requirements

Phillips screwdriver
Standard-sized, 19 wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
For outdoor applications, shielded Category 5 (or above) cabling should be used for allwired Ethernet connections and should be grounded through the AC ground of thepower supply.
We recommend that you protect your networks from harmful outdoor environmentsand destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details,
visit:ui.com/toughcable

Note:
Although the cabling can be located outdoors, the UniFi Switch itselfshould be housed inside a protective enclosure.

Hardware Installation

Connecting Power

Connecting Ethernet

Connecting SFP

Software Installation

Download and install the latest version of the UniFi Controller software at ui.com/download/unifi and follow the on-screen instructions.
Note: If you already have UniFi Controller v5.12.x or higher installed, go to thesection, Adopting the UniFi Switch.

After you have installed the software and run the UniFi Installation Wizard, a login screenwill appear for the UniFi Controller management interface. Enter the username andpassword that you created and click Sign In UBIQUITI-USW-
Pro-24-Managed-Switch-FIG-13
You can manage your network and view network statistics using the UniFi Controller management interface. To adopt the UniFi Switch, proceed to the section, Adopting the UniFi Switch. For information on configuring and using the UniFi Controller software, refer to the UserGuide on the website: ui.com/download/unifi

Adopting the UniFi Switch

From the UniFi Controller dashboard, click Devices in the left menu bar.
On the Devices screen, locate the UniFi Switch in the list of devices under the Model column. To adopt the UniFi Switch, click Adopt
The display will turn blue to confirm that the UniFi Switch has been successfully adopted.

Specifications

USW-Pro-24

Dimensions| 442.4 x 285.4 x 43.7 mm

(17.42 x 11.24 x 1.72″)

Weight

With Rackmount Brackets

| 3.50 kg (7.72 lb)

3.59 kg (7.92 lb)

Interfaces Networking

Management

|

(24) 10/100/1000 RJ45 Ports

(2) 10G SFP+ Ethernet Ports

Ethernet In-Band

Power Method Universal Input USP RPS DC Input|

100-240VAC, 50/60 Hz

11.5VDC, 2.61A

Power Supply	AC/DC, Internal, 36W
Supported Voltage Range	100 to 240VAC
Max. Power Consumption	30W

LEDs

RJ45 Data Ports SFP+ Data Ports

|

Speed/Link/Activity

Link/Activity

Safety Notices

Read, follow, and keep these instructions.
Heed all warnings.
Only use attachments/accessories specified by the manufacturer.
- WARNING:
  Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm ofclearance next to the ventilation holes for adequate airflow.
- WARNING:
  To reduce the risk of fire or electric shock, do not expose this product to rain ormoisture.
- WARNING:
  Do not use this product in location that can be submerged by water.
- WARNING:
  Avoid using this product during an electrical storm. There may be a remote risk ofelectric shock from lightning.

Electrical Safety Information

Compliance is required with respect to voltage, frequency, and current requirements indicated onthe manufacturer’s label. Connection to a different power source than those specified may result inimproper operation, damage to the equipment or pose a fire hazard if the limitations are notfollowed.
There are no operator serviceable parts inside this equipment. Service should be provided only by aqualified service technician.
This equipment is provided with a detachable power cord which has an integral safety ground wireintended for connection to a grounded safety outlet.
- a. Do not substitute the power cord with one that is not the provided approved type. Never use anadapter plug to connect to a 2-wire outlet as this will defeat the continuity of the groundingwire.
- b. The equipment requires the use of the ground wire as a part of the safety certification,modification or misuse can provide a shock hazard that can result in serious injury or death.
- c. Contact a qualified electrician or the manufacturer if there are questions about the installationprior to connecting the equipment.
- d. Protective earthing is provided by Listed AC adapter. Building installation shall provideappropriate short-circuit backup protection.
- e. Protective bonding must be installed in accordance with local national wiring rules andregulations.
The product is used in Service Access Area.

Limited Warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and,where applicable, specify arbitration instead of jury trials or class actions.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions.

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesiredoperation.

This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference to radio communications.Operations of this equipment in a residential area is likely to cause harmful interference in which casethe user will be required to correct the interference at his own expense.

ISED Canada
CAN ICES-3(A)/NMB-3(A)

Australia and New Zealand
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environmentthis equipment may cause radio interference.

CE Marking
CE marking on this product represents the product is in compliance with all directives that areapplicable to it.

WEEE Compliance Statement
Declaration of Conformity
Online Resources