DENON AH-C630W True Wireless In-Ear Headphone User Guide

June 6, 2024
Denon

DENON AH-C630W True Wireless In-Ear Headphone

CAUTION
Please do not print this page

QUICK START GUIDE

DENON AH-C630W True Wireless In-Ear Headphone FIG
2

 Charging

  • Charge the earphones using the included charging case and USB cable before use.
  •  Remove the power supply prevention film from the earphones.
  •  Put the earphones in the charging case (included) and close the lid.
  •  Connect the charging case to the AC adapter (commercially available) with the USB cable (included). The LED on the charging case will light up according to the remaining charge of the earphones.

It will take approx. 2 hours from empty to full charge. The earphones can be used for approximately 4.5 hours when the battery is fully charged. When the rechargeable battery is low, a notification sounds.

Pairing with Bluetooth device

  • Pair the earphones with the Bluetooth device you want to connect.
  •  Open the lid of the charging case. The earphones will automatically turn on, and the pairing mode will be activated with a notification sound from the earphones.
  •  Activate Bluetooth function of the Bluetooth device to be connected.
  •  Select the “DENON AH-C630W” appears on the Bluetooth device to be connected. A notification sound will be heard from the earphones when it is connected.
  • To pair with other Bluetooth devices or pair with the using device again, put the earphones in the charging case, and press and hold button on the rear of the charging case for 2 seconds or more with the lid open. The LED on the charging case of this unit blinks slowly in white, and enters pairing mode.
  • If you are requested to enter a PIN code (pass key), enter “0000” (four zeros).

Playback music

Use the Bluetooth device to control the volume. Tap the touch sensor of the right earphone to play/pause, forward and backward.

Conducting phone calls

When an incoming call is received, tap the touch sensor of the right earphone twice to answering an incoming call. During a call, tap the touch sensor of the right earphone twice to end the call. The above operation can be also performed with the touch sensor on the left earphone.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals