DENON DHT-S517 Dolby Atmos Soundbar and Wireless Subwoofer User Guide
- June 6, 2024
- Denon
Table of Contents
**DHT-S517 Dolby Atmos Soundbar and Wireless Subwoofer
**
User Guide
Safety Instructions (Read these safety instructions before operating the unit.)
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with the arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
** The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
** WARNINGS
NOTES ON USE
-
Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack.
-
Handle the power cord carefully. Hold the plug when unplugging the cord.
-
Keep the unit free from moisture, water, and dust.
-
Unplug the power cord when not using the unit for long periods of time.
-
Do not obstruct the ventilation holes.
-
Do not let foreign objects into the unit.
-
Do not let insecticides, benzene, and thinner come in contact with the unit.
-
Never disassemble or modify the unit in any way.
-
Ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, tablecloths or curtains. -
naked flame sources such as lighted candles should not be placed on the unit
-
Observe and follow local regulations regarding battery disposal.
-
Do not expose the unit to dripping or splashing fluids.
-
Do not place objects filled with liquids, such as vases, on the unit.
-
Do not handle the mains cord with wet hands.
-
When the switch is in the OFF (STANDBY) position, the equipment is not completely switched off from MAINS.
-
The equipment shall be installed near the power supply so that the power supply is easily accessible.
-
Do not keep the battery in a place exposed to direct sunlight or in places with extremely high temperatures, such as near a heater.
-
Do not bend forcedly the plug on the equipment or the connection between the connector and micro USB/USB cable.
IMPORTANT SAFETY INSTRUCTIONS
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with a dry cloth.
-
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions. -
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat
-
Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
****Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
UKCA DECLARATION OF CONFORMITY
Hereby, [D&M Holdings Inc.] declares that our product is in compliance with
the following UK regulations. The full text of the UKCA declaration of
conformity is available at the following internet address:
Hot surface mark
CAUTION: HOT SURFACE. DO NOT TOUCH.
The top surface over the internal heat sink may become hot when operating this
product continuously. Do not touch hot areas, especially around the “Hot
surface mark” and the top panel.
CAUTION:
To completely disconnect this product from the mains, disconnect the plug from
the wall socket outlet. The mains plug is used to completely interrupt the
power supply to the unit and must be within easy access by the user.
CAUTION:
To prevent electric shock hazards, do not connect to the mains power supply
while the grille is removed.
Hereby, [D &M Holdings Inc.] declares that our product is in compliance with
the following EU/EC Directives. The full text of the EU declaration of
conformity is available at the following internet address: ErP: EC regulation
1275/2008 and its framework directive 2009/125/EC including
amendment 801/2013 RoHS: 2011/65/EU, and amendment directive (EU) 2015/863 RE:
2014/53/EU
A NOTE ABOUT RECYCLING:
This product’s packaging materials are recyclable and can be reused. Please
dispose of any materials in accordance with the local recycling regulations.
When discarding the unit, comply with local rules or regulations. Batteries
should never be thrown away or incinerated but disposed of in accordance with
the local regulations concerning battery disposal. This product and the
supplied accessories, excluding the batteries, constitute the applicable
product according to the WEEE directive.
<EU declaration of conformity URL: http://manuals.denon.com/CEdeclaration/>
D&M
Holdings Inc. 2-1 Nissin-cho, Kawasaki-ku, Kawasaki, Kanagawa, 210-8569 Japan
Cautions on installation
For proper heat dispersal, do not install this unit in a confined space, such
as a bookcase or similar enclosure.
When mounting the speakers on a wall
-
The speakers can be mounted on a wall using the keyhole hook on its rear panel.
-
When you mount the speakers, be sure to install them properly and securely.
1. Screw in one self-tapping screw (commercially available, 3/16 inch / 5 mm to 1/4 inch / 6 mm diameter) into a wall that has sufficient strength to support the weight of the speaker, or into reinforcing material on the wall. -
Hook the keyhole hook on the back of the speaker onto the head of the self-tapping screw. 13/32 inch / 10.5 mm More than 13/16 inch / 20 mm
-
Check that the head of the self-tapping screw hooks securely into the keyhole hook hole.
-
Do not attempt to install this product onto a wall made of material that may crumble easily, such as mortar or decorative plywood. Doing so may result in the screw pulling out and the speaker falling, causing damage to the speaker or injury.
-
Do not install the speaker using other methods such as nails or double-sided tape. The nails may become loose due to vibration or the double-sided tape may peel off due to prolonged use, causing the speaker to fall.
-
Be sure to fix the cables in place so that they cannot be pulled or tripped over by accident. Be sure to check that the product is safe after installation. Please note that we can not accept any liability for accidents, etc. that occur as a result of here or how this product is installed. If you are unsure of how to install this product safely, request a professional contractor do the installation work.
FCC Information
(For US customers)
COMPLIANCE INFORMATION
- Product Name: HOME THEATER SYSTEM
- Model Number: DHT-S517
- THIS PRODUCT’S FCC ID: **
This product complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this product may not cause harmful
interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.
Sound United, LLC
5541 Fermi Court Carlsbad, CA 92008, USA
Tel. 800-377-7655
2. IMPORTANT NOTICE:
DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in
this manual, meets FCC requirements. Modification not expressly approved by
Denon may void your authority, granted by the FCC, to use the product.
3. IMPORTANT (For Network) When connecting this product to a network hub
or router, use only a shielded STP or SCTP AN cable that is available at the
retailer. Follow all installation instructions. Failure to follow instructions
could void
your authority, granted by the FCC, to use the product.
4. CAUTION (For Bluetooth/Wi-Fi)
• To comply with FCC RF exposure compliance requirement, a separation distance
of at least 20 cm must be maintained between this product and all persons.
• This product and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
5. NOTE This product has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed
to provide reasonable protection against harmful interference in a residential
installation. This product generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this product does cause harmful interference to radio or television reception,
which can be determined by turning the product OFF and ON, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY
Hereby, [D&M Holdings Inc.] declares that our product [Product Name: HOME
THEATER SYSTEM, Model Number: DHT-S517] is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address: http://manuals.denon.com/CEdeclaration/
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in
this manual, meets RE directive requirements. Modification of the product
could result in hazardous Radio and EMC radiation.
3. CAUTION
A separation distance of at least 20 cm must be maintained between this
product and all persons. This product and its antenna must not be co-located
or operating in
conjunction with any other antenna or transmitter.
DHT-S517
Dolby Atmos Soundbar & Wireless Subwoofer
Quick Start Guide
Read Me First….
Before You Begin What You Need Welcome
Thank you for choosing a Denon TV Sound system. This guide provides step-by-
step instructions for setting up your TV Sound system.
These drawings are for illustrative purposes only and may not represent the
actual product(s).
What’s In the Box
Before using the remote control unit
Setup
There are six steps to the setup process.
- Placing the Soundbar
- Placing the Subwoofer
- Connecting the Soundbar to the TV
- Connecting the power cords to the AC outlet
- Using the Soundbar for TV sound
- Using the Soundbar for Bluetooth music streaming
1 Placing the Soundbar
Place the Soundbar in front of the TV.
- The Soundbar can also be mounted to a wall. Refer to the included wall mount template for details on how to mount.
- If you want to install your Soundbar on a wall, please refer to the Owner’s Manual for mounting instructions or contact your Denon dealer for assistance.
2 Placing the Subwoofer
Place the Subwoofer on the floor near the Sound bar.
Connecting the Soundbar to TV
For TVs with eARC (Enhanced Audio Return Channel)/ARC (Audio Return Channel) support, connect the Soundbar to the TV with the included HDMI cable.
If the TV does not support eARC/ARC, connect it to the Soundbar using the included HDMI cable and optical digital cable.
Connecting the power cords to the AC outlet
Connect the included power cords to the Soundbar and Subwoofer, and insert the
plugs into an outlet.
Turn on the Soundbar and the LED on the back of the Subwoofer will change from
off to green.
Using the Sound bar for TV sound
• If you hear audio coming from the TV’s internal speaker, make sure TV speaker off or min volume.
About the status LEDs
The LEDs on the Sound bar indicate the power, input source, or audio format
and other status information.
6 Using the Soundbar for Bluetooth music streaming
Before you can stream music from your Bluetooth device to the Soundbar, you
must fi rst “pair” the Sound bar and your device.
Press the (Bluetooth) button on the Soundbar (or remote control unit) until
the Bluetooth LED blinks in blue. Sound bar will go into the pairing mode.
Go to the Bluetooth settings on your device and make sure Bluetooth is turned ON.
e Select “DHT-S517 (Default)”. The status LED turns blue to indicate that the Sound bar is being paired with your Bluetooth device.
Owner’s Manual
• For more information, visit www.denon.com
• Refer to the Online Manual for other functions
information and operation procedure details.
manuals.denon.com/DHTS517/EU/EN/
References
- D＆M Portal
- DHT-S517
- Denon™ Home Theater | Enhance the Entertainment Experience
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>