BYEASY P6100 Wireless Laser Presenter Instruction Manual
- June 6, 2024
- BYEASY
Table of Contents
BYEASY P6100 Wireless Laser Presenter
Functions Front View
- Ext Pl3y::iack mode (ESC)
- while press or the Page up and Page down to;;,iethP.r fer about I second) Sw1:chable compatible with Windows and Mac cooperating systems.
- (While holding CO\.vn the Page up and Page down fo- about 3 se::a1ds to w1itc1 operating systems )
Function Back View
Features
- Adopt 2.4HGz wireless technology and high brightness green laser light design
- Page UP, P.1gc Down,Kcys Play(SHIFT+F5),Scrccn black & Cxit Playback mode(l::SC).
- Switchable cornpatible with Wirdovvs a’ld Mac operating systems. (Whi IP. holding oown the Page up anrl Page oown for about 3 seconds to switch operating systerns)
- Green laser I ight can be U’3ed contiruousl1 for 50 hours without replacement battery.
- Low voltage indicator reminos batter1 replacement
- With the r::iower- switch, battery more power.
- Magnetic suction clccommodilti ng USB wireless receiver.
- IJSB 2.0 carnectian., plug & play.No 5oftware dovvnloads & dri11er installation required.
Specifications
- Dimension
- Presenter: L=15.8 cm 1N=1. 9 cm H=1.9 cm
- Receiver: L=l.9cm W=l.3cm H=0.45cm
- Weight: Presenter: 46g(battery included):Receiver : 2g
- Button : 4 buttons
- Presenter Power : 3.0V
- RF Fequency: 2.4O8~2.474GHz
- Out0ut :cu I < lmW
- POWER : DC 3V:-:::30-50mA
- Laser \’Vavelength : 550m1
- Operating distarice : 30 rv
- interface: USB2.0
- Support OS : win 8. i / 7 / Vista/ XP / MAC 7 0.7 Up
Warning
LASER RADIATION AVOID DIRECT EYE EXPOSURE
System Requirement
The wireless USB receiver is used like a regular USS flash drive. Plug the receiver directly into an available USB port of your \ notebook or computer. the drive is automatically recognized and installed .
Note: please always pay attention on the direction of the USB when plug
into the USB drive,
Pairing step
- Take out the battery cover of the presenter and put in 2 MA. batteries properly.
- . At the same time suppress Page UP and Page Down button after turning the power switch The indicator light will flash { can suppress the release button l Page UP and Page Dovwn
- Toe USS recei1;er into your computer’s USB port . the computer will automatically recognize the hardware and install the USB drivers on their own indicator v..-ill stop flash.ng, indicating that the connection has been successful you can use.
Note:
- Make sure the battery is charged, if not replace the battery, Please brief the distance of the USB pen and receiver
- pairing control within 30 cm And complete the pairing steps within 30 seconds
Battery and related information
- 1.5V (AAA) size alkaline, carbon-zinc or zinc battery filter
- Insert the batteries, please check the battery’s positive ( +) negative(-) pole and the direction of the battery slot of the marked line
- Charge or replace the batteries after power is drained. Please remove the batteries to avoid leakage that might cause harm.
- Remove the batteries if device won’t be used for a long time.
- Dispose of the used batteries properly.
- in case of battery leakage and accidentally got a skin contact, rinse the affected area immediately with running water.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2A4NB~P61 DO
Documents / Resources
|
BYEASY P6100 Wireless Laser
Presenter
[pdf] Instruction Manual
P6100, 2A4NB-P6100, 2A4NBP6100, P6100 Wireless Laser Presenter, Wireless Laser
Presenter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>