LUMIDEE Yealink W70B Base Station User Guide
- June 12, 2024
- LUMIDEE
Table of Contents
QUICK START GUIDE
Yealink W70B
Yealink W70B Base Station
Checks
Check the packaging whether all ordered products are present:
Base station W70B
4G Router (if ordered)
Headset(s) including single charger
USB multicharged (if ordered)
Handset (if ordered)
Base station W70B
Remove the W70B base station and the supplied plug from the packaging.
Connect the plug cable to the back of the base station (1).
Then put the plug into the 220V socket.
Hang the base station as high and central as possible.
4G Router
Screw the 3 antennas onto the router: 2 on Mobile (1), 1 on WIFI (2)
Connect the plug cable with the 4-pin block (3) into the back.
Then put the plug into the 220V socket.
Connect the supplied UTP cable to LAN (4).
And connect this cable to the W70B in LAN connection.
Headset with single unit charger
Remove the headset and single charger from the packaging.
Connect the plug to the back in DC5V (1) and then plug the other side of the
cable into the 220V socket.
If you have ordered a USB-multicharged, connect the supplied USB cable to the
PC port (2) and then to the USB-multicharged.
Then put the plug of the USB-multicharged into the 220V socket.
Place the headset in the single charger and wait 30 minutes.
The headset is ready for use (or see QSG WH62/WH63).
Handset(s)
Remove the handset and base station and power cable from the box.
Connect the cable to the back of the base station.
Then put the plug into the 220V socket.
Place the handset in the base station.
Charge for 30 minutes.
Remove the handset from the base station.
The handset is ready for use (or see QSG W59R).
Questions?
Please call: 073 – 751 77 77
or email : support@lumidee.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>