Arenti Laxihub P2 Smart Pan Tilt Wi-Fi Camera User Guide
- June 6, 2024
- Arenti
Table of Contents
- Arenti Laxihub P2 Smart Pan Tilt Wi-Fi Camera User Guide
- Packing list
- Notice
- Installation
- Notice
- 3. Installation
- 4. Camera configuration
- Specifications
- Adapter Specifications
- Legal notice
- Functions
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Arenti Laxihub P2 Smart Pan Tilt Wi-Fi Camera User Guide
Packing list
Notice
To reset the device, press and hold the reset button for 5s. The camera beeps when the operation is complete.
Flashing red light (slow) | Wait for network config |
---|---|
Flashing red light (fast) | Connecting the network |
Fixed red light | Network is malfunctional |
Fixed blue light | Camera is working correctly |
Installation
- LED indicator
- Microphone
- Speaker
- Reset button
- DC5V USB port
- Micro SD card slot
Notice
If you have multiple cameras, please follow step 5 again to add devices one by
one.
To change the Wi-Fi network, please restore the camera to factory settings and
follow step 5 to add the camera.
3. Installation
-
Use the included mounting bracket to fix the camera to a clean surface
-
Or, put the camera on a flat surface.
4. Camera configuration
Step 1 Turn on your camera by plugging in the power adaptor.
Step 2 Connect your smartphone to the Wi-Fi network.
Step 3 Download Arenti app from the App Store or Google Play depending on your
device.
Step 4 Launch Arenti app and sign up for the first use.
Step 5 Follow the steps below to add your camera, then follow the on-screen
instructions.
For more Information, scan the QR code below
https://www.arenti.com/blogs/help_center
Specifications
Sensor type | 1/2.9″ CMOS |
---|---|
Min. brightness | Color 0.01 Lux@F1.2 |
Black and white 0.001Lux@F1.2 | |
Resolution | 2 Mega pixels |
Lens | 3.6 mm F2.0 |
Shutter | 1/25-1/100,000 per second |
Infrared | High power LED with ICR |
Infrared distance | 10 meters |
Pan/Tilt | 0°-355°/-43°-77° |
Video compression | H.264 |
Bit rate | 32Kbps – 2Mbps |
Max resolution | 1920 x 1080 |
Framerate | 1-25 per second |
Picture settings | Support HD/SD; support flip |
Storage | SD card (Max 256GB) |
Audio | Two-way audio |
Protocols | HTTP, DHCP, DNS, RTSP |
WiFi standard | IEEE802.11a/b/g/n |
Frequency | 2.4 GHz; 5 GHz |
Bandwidth | 20/40MHz |
WiFi encryption | WPA-PSK/WPA2-PSK |
Security | AES128 |
Working temperature | -20°C-50°C |
Power | DC5V,1A |
Consumption | 4.5W MAX |
Size(mm) | 59 x 63 x 110 |
Adapter Specifications
Input voltage | 100-240V AC |
---|---|
Input frequency | 50-60Hz |
Output voltage | 5V DC |
Output current | 1A |
Output power | 5W |
Efficiency | 73,62% |
No-load Consumption | <0.1W |
Legal notice
Support
www.laxihub.com
Symbols
Direct current (DC)
Don’t throw batteries or out-of-order products with household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collection of garbage proposed by your city.
Hereby, Laxihub, declares that the radio equipment type ‘PTCam’ is in compliance with the Directive 2014/53/EU The full test of the EU declaration of conformity is available at the following Internet address: www.laxihub.com
Functions
FCC Statement This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement This device complies with FCC radiation
exposure limits set forth for an uncontrolled environment and it also complies
with Part 15 of the FCC RF Rules. This equipment must be installed and
operated in accordance with provided instructions and the antenna(s) used for
this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers
must be provided with antenna installation instructions and consider removing
the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution! Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>