LUNA High Performance ARCB Case Fan AL120 User Manual
- June 6, 2024
- Luna
Table of Contents
LUNA High Performance ARCB Case Fan AL120
Product Video Information Luna Series Product Video
Luna Series Installation Video
Shoot for the moon
InWin’s Luna AL120 will keep your PC cool with high airflow up to 82.96 CFM. Its highly optimized P/Q curve shows that Luna AL120 is suitable for static pressure and airflow demanding operations. Luna AL120 is the result of InWin’s constant effort and commitment to achieve excellence. This High Performance case fan will not only keep your system as cool as the dark night, but through its nine crescent white blades, the ARGB colors will shine even more brightly and colorfully, presenting your build in the most beautiful light possible.
Package Contents
Triple Pack
- Luna AL120 Fans x 3
- Screws x 12
- ARGB One-Click Controller x 1
Single Pack
- Luna AL120 Fan x 1
- Screws x 4
Cable Information
Addressable RGB Fan Cable, Addressable RGB Y-Cable
ARGB One-Click Controller ver. 1.1
Note: Only in Triple Pack
Installation
-
Please make sure the power is off.
-
Install the fans in your PC case and mount them in the designated areas.
-
The fan cable, Addressable RGB Y-Cable and their counterparts are attached to each fan. Please connect as followed:
a Connect the fan’s Addressable RGB Y-Cable to a motherboard’s 3-pin addressable RGB header.
b Connect the attached fan cable to the motherboard’s fan header.
c Installing the 2nd fan: Connect the Addressable RGB Y-Cable and connect it to the available
d 3-pin Addressable RGB header on the previous fan. Connect the fan to the available fan header from the previous fan.
-
Installing the 3rd fan: Repeat c d
Installation
If your motherboard does not support an addressable header, please use the
included Addressable RGB Controller to connect to your PSU’s SATA cable and
the fan’s Addressable RGB Y-Cable in order to use the 14 different lighting
effects. (Only in Triple Pack)
Hold the button to turn on or off the lights. Tap the button to change the lighting modes.
| 1 | Rainbow | 8 | Two-Tone Ring |
|---|---|---|---|
| 2 | LED-Red Breathing | 9 | Diagonal Transition |
| 3 | LED-Green | 10 | Rotating LED Trio |
| 4 | LED-Blue | 11 | Full Circle |
| 5 | LED-Purple | 12 | Flow-Red |
| 6 | LED-White | 13 | Flow-Green |
| 7 | Light at the endof the |
Tunnel
| 14| Flow-Blue
- InWin reserves the right to change the lighting modes.
- For more installation instructions, watch the video in the
website link: https://youtu.be/_S_LLcqe0KI
Troubleshooting
If your fan does not operate properly, please follow the instructions below:
-
Please check your system’s power.
-
Please make sure all the connectors are connected properly.
-
Please install the fans by following our instructions.
-
When storing the fans, please keep this product away from high temperatures. Keep it away from machines such as heaters that might cause high temperatures.
-
Please do not put anything in the impeller.
-
Please do not modify the wires or the connectors provided by InWin.
-
Please do not touch the fan blades when the fan is in operation.
-
Please only use your fan in a computer case.
-
Please keep this product away from any liquids.
Specifications
- Specifications may vary based on different regions.
- Our products comply with RoHS regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>